Anticon datasheet - Insulation Industries

Anticon Tm Faced
Glasswool Blanket
Introduction
Bradford Anticon TM Roofing Blanket is lightweight
insulation specially designed for use in residential and
commercial buildings.
Product Description
Bradford Anticon TM Roofing Blanket consists of a
glasswool blanket adhered to reinforced reflective
thermofoil facing.
The glasswool blanket is manufactured by spinning
molten glass, containing up to 65% recycled content,
into fine wool like fibres. These are bonded together
using a thermosetting resin. The Bradford Thermofoil
facing extends 150mm beyond one longitudinal edge of
the blanket to provide an overlap when installed. The
product can be identified by its golden appearance and
foil facing.
Applications
Anticon TM Roofing Blanket is designed to provide
efficient thermal insulation and condensation control
under metal deck, fibre cement and concrete roofs
in residential or commercial applications. The name
“Anticon TM ”reflects the anti-condensation function of
this product. Typical Applications include;
• Residential metal clad roofs
• Commercial and industrial metal clad and fibre cement
roofs eg. offices, shopping centres, warehouses (refer
Note 1)
• Under concrete* slabs in carparks
For optimum thermal performance the bright side of
the Thermofoil is positioned in a downward direction
adjacent to a still air space. Anticon TM is designed to
reduce rain and aircraft noise and can also substantially
reduce reverberant noise within the building.
Health and Safety
This product is manufactured to the latest Fibre Bio-
Soluble (FBS-1) Glasswool formulation and is not
classified as hazardous according to the criteria of the
ASCC (formally NOHSC) guidelines. For further
information refer MSDS sheet on Bradford website.
Benefits
• Lightweight insulation blanket
• Available in a range of thicknesses to meet BCA
energy efficiency provisons.
• Reduces overall building energy usage
• Helps prevent condensation
• Reduces rain noise
• Can be stored externally in water resistant packaging
• Can be custom cut to required length to reduce waste
and installation time
• Made from a biosoluble formulation
• Manufactured in Australia
Available Facings
Bradford Anticon TM Roofing Blanket is supplied with a
range of factory applied reinforced laminated aluminium
foil facings. Standard Anticon TM consists of Light Duty
Thermofoil. Refer to table below for the range of foil
facing applications:
Support Spacing
≤ 600
≤ 900
≤ 1200
>1200
Foil Duty (AS4200.1)
Light Duty
Medium Duty
Heavy Duty
Use support mesh with any of the
above
To enhance the versatility of Anticon TM a number of
other factory applied facings are available to order. e.g.
Black foil or Thermoplast white decorative membrane.
These orders may be subject to minimum order
quantities and longer lead times, Contact Bradford
Insulation for further information.
Applications
• Always ensure that the insulation can recover to its
design thickness by using Bradford Spacer Systems
• Foil repairs and penetrations must be treated with
Bradford Foil or Thermoplast tape
• Consult with your Bradford Insulation Sales
Representative for high humidity applications
ANTICON TM FACED GW BLANKET– data sheet
Note 1: Applications must be sealed against the ingress of water and prevent the passage of water through joints or
penetrations

Anticon TM Faced Gw Blanket
SKU Table
Product
TM
Physical Properties
Maximum Service Temperature Glasswool: 350°C; Reflective foil 70°C
Fire Hazard Properties
Corrosion Resistance
Moisture Absorption
AS4859 Compliance
Sample Specification
Material R-value
See Note
Sound Absorption
Thickness (mm)
Nominal Length
(m)
When tested in accordance to AS/
NZS 1530.3:1999
When tested in accordance with BS
3958.5:1969
When left in a controlled
atmosphere of 50 o C and 95%
relative humidity for four days
Complies with AS/NZ4859.1
“Materials for the thermal insulation
of buildings”
Nominal Width
(mm)
When tested in a reverberation chamber in accordance with ASISO354-2006
Product Thickness Frequency (Hz)
Nominal
Coverage m 2
• Ignitability: 0
• Spread of flame: 0
• Heat Evolved: 0
• Smoke Developed: 1
pH 7.5-8.0
Incapable to corrode steel
Less than 0.2% by volume
Complies
Nominal Pack
Weight kg
Anticon 55
TM
R1.3 60 15 1200 18 11.9
Anticon 55
TM
R1.3 60 15 1400 21 13.9
Anticon 75
TM
R1.8 80 15 1200 18 15.9
Anticon 95
TM
R2.3 100 10 1200 12 13.2
Anticon 110
TM
R2.5 110 10 1200 12 14.5
Anticon 100 HP
TM
R2.5 100 10 1200 12 16.8
Anticon 120
TM
R2.6 120 10 1200 12 17.9
Anticon 125
TM
R2.8 125 10 1200 12 18.5
Anticon 130 R3.0 130 10 1200 12 17.2
TM
Anitcon 140 R3.3 140 7.5 1200 9 21.0
TM
Anticon 145 R3.6 145 7.5 1200 9 24.8
Note: Stated material performance is a function of thickness - always ensure that the insulation can recover to its stated
thickness by using Bradford Spacer Systems
TM
The insulation material shall be Bradford Anticon Glasswool
TM
Roofing Blanket, Anticon (55, 75, 95 100HP, 110, 120, 125, 130,
140, 145) faced with (Specify foil facing).
(mm) 125 250 500 1000 2000 4000 NRC
Anticon TM 130 Thermofoil LD 130 0.6 1.00 1.00 0.70 0.40 0.25 0.85
ANTICON FibreTEX TM FACED 450 Rockwool GW BLANKET– – data sheet
Publish date: 08/11 Doc ref: Anticon Faced GW Blanket
CSR Bradford Insulation
55 Stennett Rd, Ingleburn NSW 2565 Australia.
Telephone (02) 9765 7000 Facsimile (02) 9765 7002
www.bradfordinsulation.com.au
CSR Bradford Insulation is a business division of CSR Building Products Limited ABN 55 008 631 356
The contents of this brochure are copyright protected and may not be reproduced in any form without prior written consent of CSR Bradford Insulation. Recommendations and advice
regarding the use of the products described in this brochure are to be taken as a guide only, and are given without liability on the part of the company or its employees. We reserve
the right to change product specifications without prior notification, please refer to the Bradford website for the latest version of this document. The purchaser should independently
determine the suitability of the product for the intended use and application.