06.06.2015 Views

HIP BELTS & HARNESSES

HIP BELTS & HARNESSES

HIP BELTS & HARNESSES

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>HIP</strong> <strong>BELTS</strong> & <strong>HARNESSES</strong><br />

2nd Edition


QUALITY COMFORT INNOVATION<br />

<strong>HIP</strong> <strong>BELTS</strong><br />

The Hip Belt is the primary<br />

anterior support in seating, as<br />

it helps maintain the stability of<br />

the pelvis.<br />

• For maximum effect, position the<br />

attachment points of the Hip Belt as<br />

close to the user as possible.<br />

• Positioning the main (wide) straps<br />

below the ASIS reduces the possibility<br />

of the pelvis slipping under the belt.<br />

• The selection & set-up of the cushion<br />

& backrest influences the position &<br />

stability of the pelvis.<br />

<strong>HARNESSES</strong><br />

Anterior upper body support<br />

is used to maintain spinal<br />

alignment over a stable pelvis.<br />

• Attaching the lower straps of the<br />

harness to the backrest shell rather<br />

than the wheelchair frame provides<br />

a more snug fit.<br />

• Shoulder strap guides (Pg.10) holds<br />

the harness in position over the<br />

users shoulders.<br />

LIMB STABILISERS<br />

Careful positioning of the feet is<br />

critical as it indirectly influences<br />

the position of the pelvis and<br />

affects the overall stability of<br />

the user.<br />

• Always start with the pelvis.<br />

• If hamstrings are shortened, to reduce<br />

posterior pelvic tilt, shift the feet back to<br />

a comfortable position.<br />

• For windswept postures, align the feet<br />

with the knees.<br />

1


CONTENTS<br />

<strong>HIP</strong> <strong>BELTS</strong><br />

Pg. 3<br />

<strong>HARNESSES</strong><br />

Pg. 5<br />

LIMB STABILISERS<br />

Pg. 8<br />

ACCESSORIES<br />

Pg. 10<br />

SPEX HARNESS SIZE SELECTION GUIDE<br />

SIZE X-small Small Medium Large X-Large<br />

Wheelchair<br />

Width<br />

8" – 12" 11" – 15" 14" – 17" 17" – 20" 20"+<br />

2


<strong>HIP</strong> <strong>BELTS</strong><br />

Soft comfortable pads offer excellent resilience,<br />

water resistance & conform to the body<br />

without creasing<br />

Durable Polyester webbing is ‘ridge’ woven for<br />

maximum grip once adjusted<br />

Tough Stainless Steel adjusters<br />

Attachment Hardware<br />

included with every Hip<br />

Belt allows a multitude of<br />

positioning options<br />

3


STYLE<br />

SIZE<br />

WEBBING<br />

WIDTH<br />

ANTI–ESCAPE<br />

BUCKLE<br />

SIDE RELEASE<br />

BUCKLE<br />

CENTRE<br />

RELEASE<br />

BUCKLE<br />

2-Point Unpadded Centre Pull<br />

Sml 38mm 1404 6231 026 1404 6231 027 1404 6231 028<br />

Med 50mm 1404 6232 026 1404 6232 027 1404 6232 028<br />

Lge 50mm 1404 6233 026 1404 6233 027 1404 6233 028<br />

2-Point Padded Centre Pull<br />

X-small 25mm – 1405 6210 027 –<br />

Sml 38mm 1405 6211 026 1405 6211 027 1405 6211 028<br />

Med 38mm 1405 6212 026 1405 6212 027 1405 6212 028<br />

Lge 50mm 1405 6213 026 1405 6213 027 1405 6213 028<br />

2-Point Padded Dual Centre Pull<br />

X-small 25mm – 1405 6220 027 –<br />

Sml 38mm – 1405 6221 027 –<br />

Med 38mm – 1405 6222 027 –<br />

Lge 50mm – 1405 6223 027 –<br />

4-Point Padded Centre Pull<br />

X-small 25mm – 1406 6410 027 –<br />

Sml 38mm 1406 6411 026 1406 6411 027 1406 6411 028<br />

Med 38mm 1406 6412 026 1406 6412 027 1406 6412 028<br />

Lge 50mm 1406 6413 026 1406 6413 027 1406 6413 028<br />

4-Point Padded Dual Centre Pull<br />

X-small 25mm – 1406 6420 027 –<br />

Sml 38mm – 1406 6421 027 –<br />

Med 38mm – 1406 6422 027 –<br />

Lge 50mm – 1406 6423 027 –<br />

4-Point Padded Side Pull<br />

X-small 25mm – 1406 6400 027 –<br />

Sml 38mm 1406 6401 026 1406 6401 027 1406 6401 028<br />

Med 38mm 1406 6402 026 1406 6402 027 1406 6402 028<br />

Lge 38mm 1406 6403 026 1406 6403 027 1406 6403 028<br />

Size Selection Guide on Page 2<br />

4


<strong>HARNESSES</strong><br />

CENTRE POINT H–HARNESS<br />

X-Sml 1409 6660<br />

Sml 1409 6661<br />

Med 1409 6662<br />

Lge 1409 6663<br />

X-Lge 1409 6664<br />

Size selection guide on Pg. 2<br />

Soft waterproof pads<br />

gently form to the<br />

body without creasing<br />

Smooth polyester<br />

binding is comfortable<br />

against sensitive skin<br />

Sleek pad design<br />

reduces coverage to<br />

minimise sweating<br />

Unique sternal<br />

section of harness<br />

stays pressed<br />

together as straps<br />

are tightened<br />

Harness follows<br />

natural contours<br />

of the body and<br />

has clearance for<br />

stomach feeding<br />

tubes etc...<br />

5


H–HARNESS<br />

Sml 1409 6641<br />

Med 1409 6642<br />

Lge 1409 6643<br />

Size selection guide on Pg. 2<br />

6


RETRACTOR HARNESS<br />

Sml 1409 6621<br />

Med 1409 6622<br />

Lge 1409 6623<br />

Size selection guide on Pg. 2<br />

VEST–HARNESS<br />

X-Sml 1409 6610<br />

Sml 1409 6611<br />

Med 1409 6612<br />

Lge 1409 6613<br />

X-Lge 1409 6614<br />

Size selection guide on Pg. 2<br />

7


Limb Stabilisers<br />

Soft comfortable pads<br />

contoured for a snug fit<br />

Buckle fastened & tension<br />

adjustable for quick fitting<br />

Attachment hardware included<br />

FOOT-FASTS<br />

Sml 1401 6161 Pr<br />

Med 1401 6162 Pr<br />

Lge 1401 6163 Pr<br />

POSTERIOR RETAINER STRAP<br />

(Adds extra hold to the Foot-fasts)<br />

Fits Sml 1401 6165 Pr<br />

Fits Med 1401 6166 Pr<br />

Fits Lge 1401 6167 Pr<br />

8


Wheelchair<br />

Width<br />

PADDED CALF STRAP<br />

Pad<br />

Height<br />

Part No<br />

12” 50mm 1402 6172<br />

14” 70mm 1402 6173<br />

16” 90mm 1402 6174<br />

18” 110mm 1402 6175<br />

20” 130mm 1402 6176<br />

Custom Custom 1402 6177<br />

Velcro Attachment<br />

Soft Water Resistant pad<br />

WEBBING HEEL LOOPS<br />

Sml 1403 6181 Pr<br />

Med 1403 6182 Pr<br />

Lge 1403 6183 Pr<br />

Low unobtrusive & secure<br />

attachment hardware included<br />

Allows wheelchair footplates to be<br />

folded away without restrictions<br />

No protruding attachment pins<br />

FOREARM STRAPS<br />

Sml 1408 6511 Set of 4<br />

Med 1408 6512 Set of 4<br />

Lge 1408 6513 Set of 4<br />

Buckle fastened<br />

Adjustable straps<br />

Can attach with wood screws<br />

to wooden armpads or through<br />

existing armpad attachment points<br />

9


Accessories<br />

Stainless Steel<br />

Plastic<br />

TRI BAR ADJUSTERS<br />

WEBBING SIZE STYLES PART No.<br />

1 inch<br />

Plastic each 1400 6525 199<br />

Stainless Steel each 1400 6525 022<br />

1.5 inches<br />

Plastic each 1400 6538 199<br />

Stainless Steel each 1400 6538 022<br />

2 inches<br />

Plastic each 1400 6550 199<br />

Stainless Steel each 1400 6550 022<br />

HARNESS MOUNTS<br />

WEBBING SIZE<br />

PART No.<br />

1 inch each 1400 6025 022<br />

1.5 inches each 1400 6038 022<br />

2 inches each 1400 6050 022<br />

NYLON CLAMPS<br />

1400 6023 each<br />

Complete with Spacer & Hardware<br />

Fits 25mm tube & 19mm tube<br />

5mm Aluminium<br />

Fits both 1” & 1.5” straps<br />

Height adjustable<br />

Package includes a pair of strap guides &<br />

attachment hardware<br />

SHOULDER STRAP GUIDES<br />

1400 6691 199 Pair<br />

10


GUARANTEE<br />

All SPEX products are made to a high standard & carry a limited<br />

lifetime guarantee against defects in materials & craftsmanship.<br />

Products found to be defective will be repaired or replaced at the<br />

discretion of Spex Wheelchair Seating.<br />

This does not however cover general wear and tear or damage arising from<br />

misuse, negligence or any alterations carried out after manufacture.<br />

SPEX WHEELCHAIR SEATING<br />

7-9 Allens Rd, Ashburton, New Zealand.<br />

P.O. Box 2 Ashburton 7740, New Zealand<br />

Ph: +64 3 307 9790 • Fax: +64 3 307 2820<br />

Email: spex@medifab.co.nz<br />

www.medifab.co.nz

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!