2012 - 2013 catalog - Delta College

WTT 120 Wind Turbine Mechanical Systems 3 Sem Hrs
Prerequisites: MT 151, MT 161 each with a grade of “C” or better: Identifies
and explains the operation and construction of wind turbine mechanical
systems. Explains preventative maintenance activities and lubrication
requirements while emphasizing potential mechanical failures that are
associated with the maintenance activities. Provides opportunities to
inspect, disassemble, and reassemble wind turbine mechanical systems.
Demonstrates proper lubrication and preventative maintenance
techniques along with applicable mechanical repair procedures. (30-15)
WTT 215 Wind Turbine Blade Design 2 Sem Hrs
Prerequisite: WTT 120 with a grade of “C” or better. Prepares for working
with wind turbine blades to include terms, manufacture and identification
of necessary repairs of wind turbine blades to ensure effective and efficient
operation. Studies the facets of the blades of the wind turbine industry.
Covers the aerodynamic basics of the turbine blades using the wind to
convert one form of energy to another. Studies composite materials
as they are used in the manufacturing process of wind turbine blades.
Explores modes of blade failure and identification.(15-30)
WTT 230 Wind Turbine Schematics 1 Sem Hr
Prerequisite: WTT 120 with a grade of “C” or better. Identifies National
and European schematic symbols, analyzes operating characteristics,
and explains the operation of interrelated wind turbine systems. Covers
applied schematics as well as the overall operation of a wind turbine. (15-0)
WTT 240 Power Generation, Transmission,
and Distribution
3 Sem Hrs
Prerequisite: ET122 and WTT 120, both with a grade of “C” or better.
Identifies and explains the regulatory requirements as well as the risks
and hazards associated with working on high voltage systems. Applies
three-phase electrical power generation characteristics to utility scale
transformers, relays, capacitors, switchgear, and related components
for both common Delta and Wye configurations. (45-0)
WTT 280 Fundamentals of Data Acquisition 2 Sem Hrs
Prerequisite: ET122 and WTT 120, both with a grade of “C” or better.
Examines how wind resource data is collected and analyzed for use in the
development of wind powered generation of electricity. Identifies and
explains the function and operation of sensors and transducers. Develops
skills of selecting, connecting, and operating sensors and transducers in an
industrial environment in order to perform maintenance actions. (15-15)
WTT 290-299 Special Projects in Wind Turbine Technology
422 Delta College 2012-2013