EverSmart Jazz Scanners - Kodak

Create Tables 81
Ø
A message is displayed instructing you to clean the glass and place
the calibration slide on the scanner.
See the cleaning instructions in Section 6.4 on page 57.
Ø
Follow the instructions, and click Proceed.
The Create Tables window is displayed, and a fully automatic
procedure begins.
Refer to Stage 7: Create Tables, on page 61 and Stage 8: Backup to
Diskette or External Media, on page 62
At the end of the process, the following completion message is
displayed:
Results file
Upon completion of the table creation procedure, the results are written
to the file Install&Util_results_file. An explanation of this file is
provided later in this chapter.