Preps Ganging - Kodak

17
Template Page Info dialog box
To access: Select a page in the workspace > Edit menu > Get Info > Template Page tab
Option
Page Number
Finished Page Size
Position on Sheet
Locked
Reference Point
Description
You can select and edit page numbers as needed—for example, to
assign the same number to multiple template pages. If you duplicate,
copy, or step and repeat a page, each copy of the page retains the
same template page number.
Final trim box dimensions. You can edit these values, for example, if
you need to crop a content page or add white space.
Horizontal and vertical offsets between the page’s lower-left corner
and the selected reference point on the press sheet.
Select the Locked check box if you do not want to be able to
reposition this page directly in the workspace without first unlocking it.
In the Reference Point diagram, click a corner or the center of the
press sheet as the reference point for the template page position on
the sheet. The Position on Sheet values are updated whenever you
select a different reference point.
Content Bleed Limits
If no bleed is specified in a source file, a default maximum bleed of
3.175 mm (0.125 in.) is applied to the layout copies of the page only
(the source file is not affected). When two pages are placed very close
to each other, Preps Ganging automatically adjusts the bleeds so that
they meet in the middle between the pages.
To apply individual bleed margins to a page, clear the Use
symmetrical margins check box to activate all the text boxes around
the page diagram, and type individual top, bottom, left, and right
widths:
Use symmetrical
margins
Page Orientation
Select this check box if you want to specify one bleed margin width for
all four edges. Type the value into the top margin's text box.
Specify the template head direction: Up (default), Right, Down, or Left.
This value is also updated whenever you use the Rotation tool.