Technical bulletin - COMPLEX Farben
Technical bulletin - COMPLEX Farben
Technical bulletin - COMPLEX Farben
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
HU <strong>COMPLEX</strong> PRODUCTS®<br />
Josef Schellhorn GmbH • A-6334 Schwoich • Egerbach 50a • Tel.: +43 (0) 53 72 - 58 3<br />
77 • E-mail: office@complex-farben.at<br />
STAINS • WAXES • PAINTS • OILS • VARNISHES • CARE PRODUCTS<br />
<strong>COMPLEX</strong> HARD OIL<br />
TYPE OF PRODUCT:<br />
AREAS OF USE:<br />
APPLICATION:<br />
METHOD OF<br />
APPLICATION:<br />
TECHNICAL DATA:<br />
STORAGE:<br />
A high-quality, non-layer-forming wood finishing treatment<br />
based on natural raw materials. Developed in accordance<br />
with the latest findings on natural surface coatings.<br />
Complex Hard Oil is a low-viscosity hard oil combination based on<br />
vegetable oils, fatty acids and essential oils.<br />
The natural properties such as breathability, porosity and<br />
diffusibility remain unchanged; - no electrostatic charging<br />
(dust allergy)!<br />
Tested in accordance with EN 71/T3 - saliva and<br />
perspiration-resistant (children’s toy standard)!<br />
No risk of spontaneous combustion!!<br />
Can be used to treat all wooden surfaces indoors. Particularly<br />
suitable in areas exposed to chemicals and mechanical loads, hence<br />
ideal for use as a floor oil. Also suitable for CORK and NATURAL<br />
STONE FLOORS (Cotto, brick).<br />
Stir carefully before use, rate of application approx. 60 – 80 g/m².<br />
Apply 1 - 2 times depending on the absorbency of the surface.<br />
Excess oil must not be left on the surface.<br />
The surface should be free from dust, grease and loose paint<br />
(important when carrying out renovation work). Wood may be<br />
sanded (150-180 grade) or finer (up to 320) depending on the<br />
desired effect.<br />
Complex Hard Oil can be sprayed, painted on, rubbed on or applied<br />
with a roller. During application, Complex Hard Oil may be heated<br />
to a maximum of 60° C. This speeds up drying and allows the oil to<br />
penetrate more deeply.<br />
Spec. weight: Approx. 0.84 g/cm³, Viscosity: Thin, Odour:<br />
Pleasantly mild<br />
Flash point: 62°C<br />
Minimum amount required: Undiluted 60 – 80 g/m2 per coat – 1<br />
l is enough for approx. 10 – 14 m² depending on the absorbency of<br />
the wood;<br />
Dilution: Use undiluted – Clean tools using Complex Isopar<br />
special thinner or turpentine substitute;<br />
Container sizes: 1 l; 5 l; 25 l; 30 l; metal tin; 200 l drum; 1000 l<br />
container;<br />
Transport: Non-hazardous;<br />
Drying: Dust-dry: Approx. 40 min. Touch-dry: Approx. 90 min.<br />
Stackable: Approx. 3 hrs Paintable: Approx. 12 hrs<br />
Fully dry: Approx. 24 hrs<br />
The dry surface may subsequently be polished with a suitable<br />
polishing tool (brush, Fladder etc.).<br />
Shelf life: At least 1 year at normal temperatures in an unopened<br />
original container;<br />
VbF class: N/A<br />
SPECIAL ADVANTAGES OF THE PRODUCT:
HU Complex Hard Oil is based on vegetable oils, balsamic resins, natural plantbased<br />
varnishes and essential oils (Tyrolean alpine herbs). The solvent used is<br />
an extremely pure ISOPAR FLUID (also used in the manufacture of<br />
pharmaceutical ointments, household insecticides etc.). It is particularly<br />
suitable for use in offices, hotels, care homes, old people's homes and<br />
nurseries.<br />
HU Complex Hard Oil penetrates the top layers of the wood and crystallises<br />
upon drying. This makes the surface highly resistant to moisture, soiling etc.<br />
When applying the oil, use only enough to saturate the wood. Excess oil (pools)<br />
must not be left on the surface. HU Complex Hard Oil is therefore ideal for floors<br />
too!<br />
To ensure an intact environment for future generations, we need to show<br />
consideration for the Earth and work with it as partners. Complex HU Hard Oil<br />
helps to achieve this goal!<br />
The information provided above has been carefully compiled in line with the latest testing<br />
technology and is intended to serve as a guideline. Given that products can be used and<br />
applied in a variety of ways, the information is non-binding, does not give rise to any<br />
contractual legal relationship and does not release the user from their obligation to check<br />
the suitability of our products themselves. Our Terms and Conditions of Delivery and<br />
Payment also apply.