AQUASMART PU Finish Matte-2K - Antrifttaler Kunststoff-Vertriebs ...
AQUASMART PU Finish Matte-2K - Antrifttaler Kunststoff-Vertriebs ...
AQUASMART PU Finish Matte-2K - Antrifttaler Kunststoff-Vertriebs ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>AQUASMART</strong> <strong>PU</strong> <strong>Finish</strong><br />
<strong>Matte</strong>-<strong>2K</strong><br />
Water based, two-component Fully Aliphatic Polyurethane paint,<br />
for Top Coat/Concrete/natural Stone Sealing applications.<br />
Description:<br />
<strong>AQUASMART</strong> <strong>PU</strong> <strong>Finish</strong> <strong>Matte</strong>-<strong>2K</strong> is a two<br />
component, water based, aliphatic paint ideal<br />
for top coat applications and concrete/ natural<br />
stone protection. The product provides a satin<br />
finish.<br />
The material has excellent abrasion resistance<br />
and combined with ease of coloring and perfect<br />
hiding power, it is the ideal UV top coat over self<br />
leveling polyurethane and epoxy floors.<br />
<strong>AQUASMART</strong> <strong>PU</strong> <strong>Finish</strong> <strong>Matte</strong>-<strong>2K</strong> has excellent<br />
impregnation on natural stone, mosaic and<br />
concrete screeds.<br />
Apply with brush in one or two coats. Minimum<br />
total consumption: 0.1-0.2 kg/m2.<br />
Recommended for:<br />
• Provides very good impregnation of stone,<br />
porous marble & mosaics.<br />
• Excellent Topcoat over Polyurethane and<br />
epoxy self leveling floors<br />
• Excellent concrete sealer<br />
Features & Benefits:<br />
• Water based<br />
• Easy coloring with any water base<br />
pigment paste.<br />
• Quick Drying<br />
• Excellent abrasion resistance<br />
• Excellent UV resistance.<br />
• Satin result<br />
Application Procedure:<br />
Clean the substrate using a high pressure washer, if<br />
possible. Remove oil, grease and wax contaminants.<br />
Cement laitance, loose particles, mould release<br />
agents, cured membranes must also be removed.<br />
Surface irregularities should also be filled.<br />
After washing the substrate, do not allow the<br />
substrate to dry as the impregnation of the<br />
material is greatly enhanced on a wet substrate.<br />
Preparation:<br />
Mix component A and B gently, if colouring is<br />
necessary add 5% of water based pigment paste and<br />
again mix gently. When stirring take care not to<br />
introduce air in the fluid, which may result in<br />
bubbling on the cured membrane.<br />
Once the two components are mixed the product<br />
should be applied within 30 minutes. Applied<br />
product should not be re-rolled as due to the quick<br />
curing of the product roll marks and other defects<br />
may be observed.<br />
Application:<br />
Prior to application, the substrate should by wet<br />
with water. Apply with brush in one or two coats.<br />
Second coat is applied as soon as first coat is dry,<br />
usually within 1-2 hours.<br />
Consumption:<br />
•Minimum total consumption: 0,1-0,2 kg/m2.<br />
Shelf Life:<br />
Can be kept for 12 months minimum in the original<br />
unopened pails in dry places and at temperatures of<br />
5-25 oC. Once opened, use as soon as possible.<br />
Cleaning:<br />
Clean tools and equipment with water.<br />
Packaging:<br />
0.8 Kg component B + 80 gr Comp. A<br />
10 Kg Component B + 1 Kg Comp A<br />
Safety Information:<br />
The MSDS (Material Safety Data Sheet) is available on<br />
request.
Technical specifications:<br />
In liquid form (before application):<br />
40% solids in water.<br />
Property Units Method Specification<br />
Viscosity (Brookfield) cP ASTM D2196-86, @ 25°C 200<br />
Specific weight gr/cm³ ASTM D1475 / DIN 53217 /<br />
0.9<br />
ISO 2811, @20°C<br />
Required application<br />
temperature<br />
°C - > 5<br />
In cured form (after application):<br />
Property Units Method Specification<br />
Service temperature °C - -20 to 90<br />
Hardness Shore A ASTM D2240 / DIN 53505 /<br />
60<br />
ISO R868<br />
Tensile strength at break @<br />
23 oC<br />
Kg/cm2<br />
(N/mm2)<br />
ASTM D412 / DIN 52455 400<br />
(840)<br />
Elongation @ 23 oC % ASTM D412 / DIN 52455 > 30<br />
QUV Accelerated Weathering<br />
Test (4hr UV, @ 60 oC (UVB-<br />
Lamps) & 4hr COND @ 50 oC)<br />
Resistance to sodium<br />
Hypochlorite 5%<br />
- ASTM G53 passed<br />
(2,000 hours)<br />
- 10 days @ 25° C Passed<br />
Resistance to HCl 1N, PH=0.5 - 10 days @ 25° C Passed<br />
Resistance to KOH 15% - 10 days @ 25° C passed<br />
Resistance to sulphuric acid<br />
5%<br />
Resistance to<br />
orthophosphoric acid 10%<br />
- 10 days @ 25° C passed<br />
- 10 days @ 25° C passed<br />
Certified quality, environmental and occupational health & safety management systems:<br />
ISO 9001/14001 & OHSAS 18001.<br />
NONE OF OUR <strong>PU</strong>BLISHED INSTRUCTIONS AND SPECIFICATIONS, IN WRITING OR OTHERWISE, ARE BINDING EITHER IN GENERAL OR WITH RESPECT TO ANY THIRD PARTY<br />
RIGHTS, OR DO THEY RELIEVE INTERESTED PARTIES OF THEIR DUTY TO SUBJECT THE PRODUCT TO AN ADEQUATE EXAMINATION OF ITS SUITABILITY. IN NO EVENT WILL<br />
<strong>Antrifttaler</strong> <strong>Kunststoff</strong> GmbH BE RESPONSIBLE FOR DAMAGES OF ANY NATURE, WHATSOEVER, RESULTING FROM THE USE OF OR RELIANCE UPON INFORMATION OR THE<br />
PRODUCT TO WHICH INFORMATION REFERS.