REPAIR & SUPPLIES - Auto-Mecanique

Passenger and Light Truck valveS
As one of the largest suppliers of tire valves to the automotive aftermarket,
we supply only valves of the highest quality. We utilize our in-house lab
as well as independent laboratories to ensure our valves
meet or exceed all industry quality standards.
Part
Number
TR
Number
Material
Tube-Type Replacement Valves
(A)
Height
(B)
Length
Angle
Valve
Hole
17-113 13 EPDM Rubber 1.25" – – .453"
17-115 15 EPDM Rubber 1.25" – – .625"
17-113 17-115
Application: 65 psi maximum cold inflation pressure and maximum rim thickness of 0.156".
Tubeless Snap-In Valves
For box of 50, use part nunmber 17-413-50, etc.
For box of 500, use part number 17-413-500, etc.
17-412 412 EPDM Rubber 0.88" – – .453"
17-413 413 EPDM Rubber 1.25" – – .453"
17-414 414 EPDM Rubber 1.50" – – .453"
17-415 415 EPDM Rubber 1.25" – – .625"
17-418 418 EPDM Rubber 2.00" – – .453"
17-423 423 EPDM Rubber 2.50" – – .453"
17-425 425 EPDM Rubber 2.00" – – .625"
17-412 17-413 17-414 17-415 17-418 17-423 17-425
Application: 65 psi maximum cold inflation pressure and maximum rim thickness of 0.156".
Note: H, V, W, Y and Z speed rated tires require a metal bolt-in style valve.
Tubeless Snap-In Valves with Chrome Sleeve & Cap
17-412-1 412C EPDM Rubber 0.88" – – .453"
17-413-1 413C EPDM Rubber 1.25" – – .453"
17-414-1 414C EPDM Rubber 1.50" – – .453"
17-418-1 418C EPDM Rubber 2.00" – – .453"
17-412-1 17-413-1 17-414-1 17-418-1
Application: 65 psi maximum cold inflation pressure and maximum rim thickness of 0.156".
Note: H, V, W, Y and Z speed rated tires require a metal bolt-in style valve.
High Pressure Snap-In Valves
17-600HP 600HP Brass/Rubber 1.27" – – .453"
17-602HP 602HP Brass/Rubber 2.00" – – .453"
17-801HP 801HP Brass/Rubber 1.31" – – .625"
17-802HP 802HP Brass/Rubber 2.00" – – .625"
Application: 600HP / 602HP = 80 psi maximum cold inflation pressure and maximum rim thickness of 0.205".
801HP / 802HP = 100 psi maximum cold inflation pressure and maximum rim thickness of 0.205".
Note: H, V, W, Y and Z speed rated tires require a metal bolt-in style valve.
High Pressure Snap-In Valves – Chrome
17-613 Chrome/Rubber 1.27" – – .453"
17-614 Chrome/Rubber 1.50" – – .453"
17-618 Chrome/Rubber 2.00" – – .435"
17-600HP 17-602HP 17-801HP 17-802HP
Application: 80 psi maximum cold inflation pressure and maximum rim thickness of 0.205"
Note: H, V, W, Y and Z speed rated tires require a metal bolt-in style valve.
17-613 17-614 17-618
Keeping You On the Road 61