REPAIR & SUPPLIES - Auto-Mecanique

Part
Number
Schrader TPMS Tools
Description
17-153 Nut Torque Tool with Sockets
17-154 Nut Torque Wrench Kit
17-155 T-10 Torque Tool for Snap-In Sensors
17-156 Schrader Valve Core Torque Tool
17-157 Schrader Universal Nut Torque Tool Set
17-158 Grommet Removal Tool
17-159 Nissan Reset Tool
17-153
Nut Torque
Tool with Sockets
• Torque wrench for
TPMS sensor nuts
• Screwdriver handle for easy use
• Torque range from 4.25 N.m. to 7.5 N.m. (accuracy +/- 4%)
• Kit comes in a plastic storage case and includes both 11mm
and 12mm sockets
17-154
Nut Torque Wrench Kit
• Torque tool and precision quality
torque wrench for installing
TPMS sensor nuts
• Torque range from 2 N.m. to 10 N.m.
(accuracy +/- 2%)
• Kit comes in a plastic storage tray and
includes both 11mm and 12mm sockets
17-156
Schrader Valve Core Torque Tool
• Tighten valve cores to OE specifications (guards
against over or under torquing)
• Meets Tire and Rim Association recommended
torque values of 2 – 5 in-lbs [0.23 – 0.56 N.m.]
on TR C1 valve cores
• Serves as both a core remover
and installer
17-155
T-10 Torque Tool for
Snap-In Sensors
• Installs replacement
snap-in valves
to Schrader ® OE sensors
• T-10 Torx head installs screws to
recommended torque for proper
sealing and secure installation
17-157
Schrader Universal
Nut Torque Tool Set
• Torque wrench for
TPMS sensor nuts
• Ergonomic T-handle
design
• Torque range from
30 to 90 in-lbs
(3.4 N.m. to 10.2 N.m.)
17-158
Grommet Removal Tool
• Designed to safely remove
the rubber grommet from the
aluminum stem of a TPMS
sensor
• Receiving hole can be used to
install a new grommet
17-159
Nissan Reset Tool
• Activates the TPMS learning mode
on late model Nissan vehicles
Keeping You On the Road 57