REPAIR & SUPPLIES - Auto-Mecanique

Part
Number
Bubble Balancer
Rugged die-cast aluminum head cone; plated
steel guide rods with zinc chromate helper springs;
hardened cast-in-place pivot seat; recessed circular
level bubble. Shaft is made from tough 6061 extruded
aluminum ASTM B 221; hardened pivot pin for long
wear; heavy duty cast aluminum base.
Part
Number
14-961 Bubble Balancer
Description
14-962 Circular Level (Bubble) for 14-961
14-963 Pivot Pin for 14-961
Description
Wheel Balancer Cones and Spacers
14-94705-28 28mm Cone; 1.75" - 2.58" Range
14-94710-28 28mm Cone; 2.25" - 2.62" Range
14-94715-28 28mm Cone; 2.44" - 3.06" Range
14-94725-40 40mm Cone; 3.375" - 5.25" Range
14-94730-40 40mm Cone; 3.375" - 5.88" Range
14-94735-40 40mm Cone; 5.03" - 6.88" Range
14-94750-40 40mm Wheel Balancer Spacer/Backing Plate
Wheel Balancer Accessories
14-936 Manual Hub Nut for
Coats Wheel Balancers for
Coarse Thread Shaft 28.5mm
14-939 Rim Width Caliper
14-964 Shaft (Includes 2 Nuts and 2 Washers) for 14-961
14-965 3/4 and 1 Ton Adapter for 14-961
Counteract Balancing Beads
Counteract is an internal balancing compound used to balance the
entire wheel assembly. Counteract balances for the complete life of the
tire by readjusting the balanced position as required. Benefits of keeping
the entire wheel assembly in balance
include increased tread life,
increased fuel economy,
and eliminates
wheel vibration.
Easy to Use,
Bag-in-bag Packaging
Simply open the outer bag,
remove the inner bag and throw
the inner bag inside the tire before
inflating. This method allows the use
of an air blaster and will not contaminate
the bead seating area.
14-936
14-94750-40
14-94705-28
14-961
14-939
Part
Number
Hub hole diameter
Bubble sensitivity
Overall height
Overall width
Overall weight
28mm Cones and Spacers Fit
Accuturn 5223, 5500, 5100 & 5600
(Serial 51-0001 to 51-0622)
Coats All Models (Excluding 6401)
Mondolfo Ferro All Models
(Excluding Truck Balancers)
Norton All Models
Snap-On All Models
Sun 1742, 1762
40mm Cones and Spacers Fit
Accuturn 1200, 1250, 1400, 1500, 1550,
1650, 1850, 5100 & 5600
(Serial 51-0623 to 51-1457)
Bear 80-100, 80-303
Beissbarth All Models
CEMB Truck Balancers Since
June 2000
Coats With Optional 40mm Shaft
ALL Models On FMC, Hofmann, Hunter, John
Bean, Kwik-Way, Performance,
Phoenix CB-113
1.5" - 4.5" (39 - 114.3mm)
.788 sec. per 2mm
22" (559mm)
12" (305mm)
14 lbs. (6.35 kg)
Boxed dimensions 11.75" x 18" x 6.75"
(298mm x 457mm x 171mm)
Calibrated at 90˚, 180˚, 270˚, and 360˚
Contains no powders
Will not clump due to moisture
Will not interfere with tire repair
(remove before beginning repair)
Use with tubeless or tube-type tires
Description
Type of
Bead
16-301 1 oz. Passenger (Contains: 4 – 1 oz. Bags) Steel 40
16-302 2 oz. Passenger (Contains: 4 – 2 oz. Bags) Steel 32
16-303 3 oz. Passenger (Contains: 4 – 3 oz. Bags) Steel 24
16-304 4 oz. Heavy Truck Glass 92
16-305 5 oz. Heavy Truck Glass 76
16-306 6 oz. Heavy Truck Glass 64
16-308 8 oz. Heavy Truck Glass 52
16-310 10 oz. Heavy Truck Glass 40
16-312 12 oz. Heavy Truck Glass 36
16-314 14 oz. Heavy Truck Glass 32
16-316 16 oz. Heavy Truck Glass 28
Case
Qty
Keeping You On the Road 45