1000 Flat Top.pdf

Product Line Extension
Sprocket and Support Quantity Reference
Belt Width Range a Minimum Number of
Wearstrips
in. mm
Sprockets Per Shaft b
Carryway Returnway
3 76 2 2 2
4 102 2 2 2
6 152 2 2 2
7 178 2 3 2
8 203 2 3 2
10 254 2 3 2
12 305 3 3 2
14 356 3 4 3
15 381 3 4 3
18 457 3 4 3
24 610 5 5 3
30 762 5 6 4
36 914 7 7 4
42 1067 7 8 5
48 1219 9 9 5
54 1372 9 10 6
60 1524 11 11 6
72 1829 13 13 7
84 2134 15 15 8
96 2438 17 17 9
120 3048 21 21 11
144 3658 25 25 13
For Other Widths, Use Odd Number of Sprockets c at
Maximum 6 in. (152 mm) C L Spacing
Maximum 6 in. (152 mm) C L Spacing Maximum 12 in. (305 mm) C L Spacing
a. Belts are available in 1.0 in. (25.4 mm) increments beginning with 3 in. (76 mm). If the actual width is critical, consult Customer Service.
b. These are the minimum number of sprockets. Additional sprockets may be required for heavily loaded applications.
c. The center sprocket should be locked down. With only two sprockets, fix the sprocket on the drive journal side only.
in.
Sprocket Description
Pitch Diameter
mm
Dead Plate Gap
Gap
No. Teeth in. mm
3.1 79 16 0.029 0.7
4.6 117 24 0.020 0.5
6.1 155 32 0.015 0.4