CrX4 User Manual - LinPlug Virtual Instruments

More documents

Recommendations

Info

Options The Options are located in the upper right of the Settings panel Master Tune is used to set the overall tuning of the CrX4 if no microtuning file is loaded. Tuning can be set from 415 Hz to 466 Hz. Bend Range Up is used to set the CrX4's response to pitch bend messages in the upwards direction. Bend Range can be set from 0 to 24 semitones. Bend Range Down is used to set the CrX4's response to pitch bend messages in the downwards direction. Bend Range can be set from 0 to 24 semitones. Note that if the “link” setting is chosen, the Bend Range for downwards bending is the same as for upwards bending. The Velocity Curve dial is located on the right of the MasterTune control. This control allows one of ten different velocity responses to be set. These range from linear through to an extreme exponential velocity response. The Microtonal Scale control enables the CrX4 to be tuned to tunings other than Equal Temperament. See Appendix D for a complete description of how to use TUN files to set the CrX4’s scale tuning. The “Allow MIDI Program Change” option can be used to suppress CrX4 to respond to program change messages received as MIDI data from the host software (your DAW software). The default setting is On. CrX4 User Manual 58
The “Allow Host Program Change” is similar, but allows or suppresses the host to change a program (patch) in CrX4. The default is again On. Auto Close on Program Select is usually On and means that when you selected a patch in the Patch Select window, that the window automatically closes (and thus returns to the normal Edit Window). You may switch this Off in case you want to try multiple presets successively. The Wider OSC FM Range either switches the new CrX4 FM (Frequency Modulation) range of the generators On (more sonic possibilities) or Off (compatibility with CronoX 3 and CronoX 2 patches). There is a further compatibility option: “CronoX 2 Sound compatibility”, which allows the CrX4 to have the characteristic harsh sound of the CronoX 2 oscillators and filters (among a few other smaller adjustments to make the sound compatible). This option is automatically set when you load a CronoX 2 preset. CrX4 User Manual 59
Page 1 and 2:
CrX4 User Manual Copyright LinPlug
Page 3 and 4:
Welcome Thank you for purchasing a
Page 5 and 6:
Ping Pong (Delay)..................
Page 7 and 8: Common to Mac and PC The first time
Page 9 and 10: output of filter 1 is send to filte
Page 11 and 12: User Interface Sections The user in
Page 13 and 14: The Generator Controls The upper an
Page 15 and 16: Time Sampler Generator The Time Sam
Page 17 and 18: Wavetable Generator The CrX4's Wave
Page 19 and 20: which is looped. These three parame
Page 21 and 22: dynamically to MIDI input. If you o
Page 23 and 24: Oscillator Generator The Oscillator
Page 25 and 26: Filters The CrX4 contains two indep
Page 27 and 28: The Filter Envelope section is loca
Page 29 and 30: Velocity to Main Volume The Velo (V
Page 31 and 32: Effects The CrX4 has 6 independent,
Page 33 and 34: St (Stereo) Delay The Stereo delay
Page 35 and 36: Chorus The Chorus effect can be use
Page 37 and 38: Filter The Drive slider (Saturation
Page 39 and 40: Flanger The CrX4’s Flanger can be
Page 41 and 42: Stereo Enhancer The CrX4’s Stereo
Page 43 and 44: The Divider Mode popup menu determi
Page 45 and 46: The Envelopes are positioned in eac
Page 47 and 48: LFO The CrX4’s LFO (“Low Freque
Page 49 and 50: Modulation Matrix The CrX4's Modula
Page 51 and 52: § Random: In this mode the notes o
Page 53 and 54: Preset Browser The Preset Browser s
Page 55 and 56: To use the CrX4’s ECS feature, pr
Page 57: Library Location / Startup Patch Wh
Page 61 and 62: LFO: An LFO or Low Frequency Oscill
Page 63 and 64: Appendix A: Tempo Sync Settings Tem
Page 65 and 66: Expression Contr. LFO 1 LFO 2 LFO 3
Page 67 and 68: Note: The Filters 1 and 2 offer the
Page 69 and 70: Appendix D: Using TUN files in the
show all

CrX4 User Manual - LinPlug Virtual Instruments

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?