CrX4 User Manual - LinPlug Virtual Instruments
CrX4 User Manual - LinPlug Virtual Instruments
CrX4 User Manual - LinPlug Virtual Instruments
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Stereo Enhancer<br />
The <strong>CrX4</strong>’s Stereo Enhancer can be used to increase the width of the<br />
instrument’s stereo image.<br />
The Stereo Enhancer’s<br />
Room parameter operates<br />
somewhat like a reverb<br />
adding depth to the sound.<br />
This is a difficult effect to<br />
describe so try it and see<br />
what effect it has on the<br />
sound.<br />
Width increases the instrument’s stereo separation, widening the signal.<br />
Hint: The Stereo Enhancer works best with natural stereo samples. If<br />
applied to a signal with very strong stereo separation (for example, a signal<br />
processed with the Ping Pong delay) the Stereo Enhancer may not widen<br />
the stereo image but instead may narrow it.<br />
Parametric EQ<br />
The <strong>CrX4</strong>’s Parametric EQ (Equalizer) effect contains 2 independent<br />
parametric equalizer stages in series.<br />
The Freq (Frequency) control<br />
sets the frequency at which<br />
the EQ operates. A range of<br />
20 Hz to 11.000 Hz is<br />
available.<br />
The Gain control sets the<br />
amount of gain that is applied<br />
to the selected frequency. Note that the gain can be positive or negative. A<br />
positive gain corresponds to boosting the signal while a negative gain<br />
corresponds to cutting the signal. A range of -18 dB to +18 dB is available.<br />
The Q (Quality) controls set the bandwidth of the filter. A large value means<br />
that a wider bandwidth is affected.<br />
<strong>CrX4</strong> <strong>User</strong> <strong>Manual</strong> 41
Change language