CrX4 User Manual - LinPlug Virtual Instruments

Reverb
The Reverb effect is used to add ambiance to sounds.
The Roomsize slider is used to set the size of the simulated room. The
Roomsize varies from a small chamber up to a huge hall.
The Predelay slider enables
you to delay the processed
signal by a given amount (in
milliseconds) so as to
achieve a more natural
reverberation. Normally,
shorter predelay times are
applied in the case of smaller
room sizes while longer predelay times are applied in the case of larger
room sizes. Range: 0 ms...125 ms.
The time display also functions as a Sync popup menu can be used to sync
the predelay time with the current tempo (see Appendix A for the range of
possible sync settings).
The simulated room's wall materials can be adjusted with the Damp
(Damping) slider. This parameter ranges from practically loss-free reflecting
walls (0% damping) up to very absorbent walls (90% damping). In practical
terms, the amount of damping determines the amount of higher frequencies
that are contained in the processed signal: The higher the Damp (Damping)
setting, the more that higher frequencies are removed from the processed
signal.
The Reverb also allows a decent modulation which is controlled with the
Mod Depth slider; the effect is similar to a chorus and also suppresses a
certain metallic sound which otherwise can occur in large rooms.
The Mod Active switch allows quick comparison of the signal with and
without modulation.
CrX4 User Manual 38