CrX4 User Manual - LinPlug Virtual Instruments

More documents

Recommendations

Info

Operation / Controls The LinPlug CrX4 dials and sliders are operated in a linear manner, so just move your mouse up/down to modify a control. Holding down the ALT key while clicking on a control changes the selected control's value a minimum step upwards (when clicking in the upper half of the control) or a minimum step downwards (when clicking in the lower half of the control). Holding down the CTRL key (Windows) or COMMAND key (Mac) while clicking on a control sets the control to its default value (e.g. for Volume controls it sets the control's value to 0 dB). Holding down the SHIFT key while changing a control's value enables finer control values to be set. Double clicking once in a Modulation Matrix slot sets the value of the slot to 0.00. Double clicking in the same slot a second time resets the slot to its previous value. All Controls can be controlled using external MIDI messages. To do this you need to use the LinPlug CrX4's ECS which is described in detail later in this manual. CrX4 User Manual 10
User Interface Sections The user interface of the CrX4 is a major overhaul from its predecessor CronoX 3. It has been redesigned in order to make using it easier and more streamlined. A major difference is that all relevant edits are on a single page now. The idea behind this is to give the user direct access to the instrument’s most commonly used controls. The CrX4’s Main panel can be divided into 7 sections: 1. Generator 2. Filter 3. Main (including Glide) 4. Effects 5. Modulation (LFO, Envelopes and Matrix) 6. Arpeggiator 7. Preset Browser CrX4 User Manual 11
Page 1 and 2: CrX4 User Manual Copyright LinPlug
Page 3 and 4: Welcome Thank you for purchasing a
Page 5 and 6: Ping Pong (Delay)..................
Page 7 and 8: Common to Mac and PC The first time
Page 9: output of filter 1 is send to filte
Page 13 and 14: The Generator Controls The upper an
Page 15 and 16: Time Sampler Generator The Time Sam
Page 17 and 18: Wavetable Generator The CrX4's Wave
Page 19 and 20: which is looped. These three parame
Page 21 and 22: dynamically to MIDI input. If you o
Page 23 and 24: Oscillator Generator The Oscillator
Page 25 and 26: Filters The CrX4 contains two indep
Page 27 and 28: The Filter Envelope section is loca
Page 29 and 30: Velocity to Main Volume The Velo (V
Page 31 and 32: Effects The CrX4 has 6 independent,
Page 33 and 34: St (Stereo) Delay The Stereo delay
Page 35 and 36: Chorus The Chorus effect can be use
Page 37 and 38: Filter The Drive slider (Saturation
Page 39 and 40: Flanger The CrX4’s Flanger can be
Page 41 and 42: Stereo Enhancer The CrX4’s Stereo
Page 43 and 44: The Divider Mode popup menu determi
Page 45 and 46: The Envelopes are positioned in eac
Page 47 and 48: LFO The CrX4’s LFO (“Low Freque
Page 49 and 50: Modulation Matrix The CrX4's Modula
Page 51 and 52: § Random: In this mode the notes o
Page 53 and 54: Preset Browser The Preset Browser s
Page 55 and 56: To use the CrX4’s ECS feature, pr
Page 57 and 58: Library Location / Startup Patch Wh
Page 59 and 60: The “Allow Host Program Change”
Page 61 and 62:
LFO: An LFO or Low Frequency Oscill
Page 63 and 64:
Appendix A: Tempo Sync Settings Tem
Page 65 and 66:
Expression Contr. LFO 1 LFO 2 LFO 3
Page 67 and 68:
Note: The Filters 1 and 2 offer the
Page 69 and 70:
Appendix D: Using TUN files in the
show all

CrX4 User Manual - LinPlug Virtual Instruments

Create successful ePaper yourself

Delete template?

Save as template?