CronoX 2 User Guide 1.02.sdw - LinPlug Virtual Instruments
CronoX 2 User Guide 1.02.sdw - LinPlug Virtual Instruments
CronoX 2 User Guide 1.02.sdw - LinPlug Virtual Instruments
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Rear Panel<br />
The "Rear Panel" of the <strong>CronoX</strong> is accessed by clicking on the <strong>LinPlug</strong> or<br />
<strong>CronoX</strong> logos at the top of the <strong>CronoX</strong> front panel. Several master controls have<br />
been located here to make the front panel less crowded, and also so that they<br />
are not changed accidentally while the <strong>CronoX</strong> is in use. The controls located<br />
here are Dial Mode, Bend Range, MasterTune, and Scale.<br />
Dial Mode is used to select the <strong>CronoX</strong>'s dial operation mode. Two modes are<br />
available: "Cir" (Circular) and "Lin" (Linear). In "Cir" mode the <strong>CronoX</strong>'s dials<br />
track cursor movement in a circular fashion around the dial. In "Lin" mode the<br />
<strong>CronoX</strong>'s dials track vertical cursor movement. It's important to note that some<br />
sequencers can override the instrument's dial mode settings so if the <strong>CronoX</strong>'s<br />
dials are not operating in the correct manner, check the host program's settings.<br />
Range: Cir...Lin.<br />
Bend Range is used to set the <strong>CronoX</strong>'s response to pitch bend messages.<br />
Range: 1...24 semitones.<br />
In order to make the Bend Range settings from the <strong>CronoX</strong>'s rear panel work<br />
correctly in FruityLoops, FruityLoops' pitch bend range<br />
setting for the <strong>CronoX</strong> must be set to 12 . Otherwise,<br />
FruityLoops changes the PitchWheel MIDI messages.<br />
<strong>LinPlug</strong> <strong>CronoX</strong> <strong>User</strong> <strong>Guide</strong> 1.02 42