Prema-Service GmbH - Side-entry Agitators - Aquapump.co.za

Prema-Service GmbH - Side-entry Agitators
Deutsch
Home Corporate Profile Products Downloads Site Map Contact us
Mixing Technology
Side-entry Agitators
Variants
We supply the following variants of side-entry agitators: #)
Stationary Agitators
for blending refinery products
Swivel-arm Agitators
may be swivelled by 30° to either side in order to prevent material from being
deposited in crude-oil tanks and to avoid sediments in storage tanks
High-temperature Agitators
applicable up to 220 °C, e.g. for bitumen
Materials:
Manhole lid:
Propeller Speed:
Drive Performance:
Parts in contact with the product made of steel or stainless steel
(or optional, as requested by customer)
According to DIN or ASA or per client request (Material per client
request)
360 rpm - standard (or per client request)
3 to 55 kW
Brochures, Dimension Sheets and Questionaires
Drive Units
Due to the special structure of the drive unit we offer a non-split, absolutely smoothly running impeller shaft with little
wear and minimum cost of maintenance. The special structure of our drive units provides an extremely short casing
safeguarding a very small momentum for the tank wall. Thus no anchoring and no support are required. Our drive unit
will require only 2 oil changes per year. There are no additional lubricating points to be maintained. The rotating
mechanical seal, with its long-proven design, is located at the far end of the shaft, i.e. it is extremely well protected and
easy to exchange.
Bayonet Socket
The proven bayonet socket seals the drive unit from the tank in a simple manner. All repair work may thus also be
carried out with a full tank.
Special Accessories
Drive unit with integrated level monitor
Drive unit with leakage monitor
(also in the EX variant)
(also in the EX variant)
Recommendations for Assembly
http://www.prema-service.com/english/side-entry_agitators.html (1 of 2)2007/10/17 09:39:54 AM

Prema-Service GmbH - Side-entry Agitators
(A) Product Tanks
For blending operations in the
product tanks, fixed drive units are
used. Installation is oriented by the
inlet nozzle, as seen in the
illustration.
(B) Crude Oil Tanks
In this case, sediments must be
avoided at the bottom of the tank.
For this purpose the swivel variant
was designed. For these tanks the
assembly point must be exactly
opposite the inlet nozzle.
Deployment
Outside-entry agitators are deployed, among others, in the following industrial fields:
●
●
●
Chemical Industry
Refineries and the Petrochemical Industry
Wastewater conditioning
All types are structured by a modular design concept, thus the respective spare parts are, for the most part,
interchangeable.
#) Please request our questionnaire if you need a quotation (Document No. 17.7001).
Brochures, Dimension Sheets and Questionaires
Please do not hesitate to contact us for additional information.
Your contact: Mr. Heinrich Horn, Phone: +49 6172 67 78-61, E-mail: heinrich.horn@prema-service.de
Product Overview | Flare Systems | Tank Flaring | Mixing Technology | Heating Systems
Pinch Valves | Service | Performance Programme
© 2007 PREMA-SERVICE GmbH
E-mail
Home | Corporate Profile | Products | Downloads | Site Map | Contact us | Imprint
http://www.prema-service.com/english/side-entry_agitators.html (2 of 2)2007/10/17 09:39:54 AM