Daniels Tools Catalogs - Interstate Connecting Components

BETA Backshell Accessory Torque Tools
DMC offers a complete line of Adapter
Tools and Torque Tools for holding and
torquing circular connectors during the
installation and removal of accessories
(backshell, strain relief, or EMI/RFI
shielding hardware).
The evolution of circular connectors
has produced many mechanical
configurations which have more precise
dimensional tolerances and electrical
characteristics than any other mechanical
component used in modern electrical
systems. The associated tooling must
meet the same level of precision to apply
the connector to its intended purpose.
Until now, very little attention has been
focused on the tooling which is used
to mount strain-relief backshells and
other accessories to wired connector
assemblies. This is why the BETA
Connector Mate ® system was developed.
This unique concept is based upon
adaptor tools which are configured
to mate with a specific connector
series and shell size regardless of
keying arrangement. They may be
used simply as hand holding devices
for easy tightening, or, for more exact
requirements, DMC offers a wide variety
of circular wrenches, strap wrenches,
torque meters, and vises which can be
used in a variety of combinations.
Visit our web site at www.DMCTools.com/Catalog/BETA.htm or ask for our BETA catalog.
© Copyright 2012 Daniels Manufacturing Corp. ALL RIGHTS RESERVED. www.DMCTools.com
PAGE 65