Daniels Tools Catalogs - Interstate Connecting Components
Daniels Tools Catalogs - Interstate Connecting Components
Daniels Tools Catalogs - Interstate Connecting Components
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MIL-C-85028<br />
series AS<br />
Rectangular – Individual contact sealing<br />
POLARIZED CENTER JACK SCREW<br />
Pull Thru Insertion contacts**<br />
connector P/N description QPL Sources<br />
M85028/1 CRIMP REMOVABLE PIN CONTACTS<br />
M85028/2 CRIMP REMOVABLE SKT CONTACTS<br />
DELPHI CONNECTION SYSTEMS<br />
size (awg)<br />
contacts<br />
mating<br />
end<br />
wire<br />
barrel<br />
pin/soc.<br />
part number*<br />
(current)<br />
part number<br />
(superseded)<br />
wire<br />
range<br />
16<br />
16<br />
16<br />
16<br />
P<br />
S<br />
M39029/70-389<br />
M39029/69-386<br />
M39029/70-3<br />
M39029/69-3<br />
16-20<br />
16-20<br />
16<br />
16<br />
20<br />
20<br />
P<br />
S<br />
M39029/70-388<br />
M39029/69-385<br />
M39029/70-2<br />
M39029/69-2<br />
20-24<br />
20-24<br />
16<br />
16<br />
24<br />
24<br />
P<br />
S<br />
M39029/70-387<br />
M39029/69-384<br />
M39029/70-1<br />
M39029/69-1<br />
24-28<br />
24-28<br />
TYPICAL CONTACT<br />
CONFIGURATION<br />
Tool Selection Crimp Tool And Accessory ASSEMBLY TOOLS<br />
BIN* COLOR AF8 AFM8 MH860<br />
389<br />
386<br />
388<br />
385<br />
387<br />
384<br />
ORANGE-GRAY-WHITE<br />
ORANGE-GRAY-BLUE<br />
ORANGE-GRAY-GRAY<br />
ORANGE-GRAY-GREEN<br />
ORANGE-GRAY-VIOLET<br />
ORANGE-GRAY-YELLOW<br />
TP651<br />
TP651<br />
TP651<br />
TP651<br />
TP651<br />
TP651<br />
WA23<br />
(POS)<br />
WA23<br />
(DIE) INSTALLING** REMOVAL<br />
DAK1-16P<br />
DAK1-16S<br />
DAK1-16P<br />
DAK1-16S<br />
DAK1-16P<br />
DAK1-16S<br />
DRK222<br />
DRK222<br />
DRK222<br />
DRK222<br />
DRK222<br />
DRK222<br />
*The three number suffix on M39029 series contacts is referred to as a “BIN” code. See page 22 for color stripe association.<br />
** Due to the sealing grommet on the contact wire barrel, it requires a special tool which is inserted through the connector, attached to the<br />
mating end of the contact, and then “pulled” into the connector. A release on the tool is actuated and the tool can be removed from the<br />
contact.<br />
DMC does NOT provide connectors, contacts, or wiring components. Parts are shown here for reference only.<br />
© Copyright 2012 <strong>Daniels</strong> Manufacturing Corp. ALL RIGHTS RESERVED. www.DMC<strong>Tools</strong>.com<br />
PAGE 53
Change language