Daniels Tools Catalogs - Interstate Connecting Components

Terminal and Splice Crimp Tooling Options 8 to 4/0 AWG
Tools and Dies for Crimping Terminals and Splices (continued)
8 to 4/0 AWG Tooling Options*
HX4 Tool Series Options for Y-Dies
HD36 Tool Series Options
HD37
Hand Tool,
p. 108
HX23
Pneumatic Tool, p. 74
HD36
Hand Tool, p. 109
HDE37B
Battery Hydraulic Tool, p. 108
EHCY
Electric/Hydraulic Tool, p. 76
EHCD36
Electric/Hydraulic Tool, p. 111
HDE36B
Battery Hydraulic Tool, p. 110
HD51 Tool Series Options**
Tool Options for HD002,
HD485, & HD442 Dies **
HD51
Hand Tool, p. 112
HH80C
Hand Tool, p. 114
XHD51
Pneumatic/Hydraulic Tool, p. 112
TBHD1M
Pneumatic/Hydraulic Tool, p. 114
** Hydraulic pump, hose, and other accessories are shown elsewhere in the catalog.
Wire Stripping for Terminals and Splices
Wire strip length and configuration is important to the success of a termination. Guidelines for particular components being
terminated should be followed carefully. For additional information on stripping wire for terminals and splices, contact DMC.
Standardization
DMC has maintained a leadership role in military and commercial standards committees such as SAE, WHMA, EIA, UL/NEMA,
and DoD organizations. The following tool selection charts represent the current leading standard components and tools. If questions
or conflicts arise in the use of these charts, please notify DMC (407-855-6161, DMC@DMCTools.com).
© Copyright 2012 Daniels Manufacturing Corp. ALL RIGHTS RESERVED. www.DMCTools.com
PAGE 119