Daniels Tools Catalogs - Interstate Connecting Components
Daniels Tools Catalogs - Interstate Connecting Components
Daniels Tools Catalogs - Interstate Connecting Components
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Terminal and Splice Crimp Die Tooling Options 26 to 10 AWG<br />
<strong>Tools</strong> and Dies for Crimping Terminals and Splices<br />
DMC has several die configurations for crimping terminals intermediate/depot maintenance, a tool series might include<br />
and splices. AWG size is one determining factor, but each die pneumatic tools, hydraulic tools, battery hydraulic tools, or<br />
configuration has a designated tool series. The hand tool is the electric hydraulic tools.<br />
basis of each tool series and suitable for the low volume of NOTE: If MIL Approval is required, QPL status should be<br />
prototype or repair work. For higher volume production and verified. Consult DMC for current status.<br />
26 to 10 AWG Tooling Options*<br />
HX4 Tool Series Options for Y-Dies<br />
HX3 Tool Series Options for X-Dies<br />
HX23<br />
Pneumatic Tool, p. 74<br />
HX4 or UDT4<br />
Hand <strong>Tools</strong>, p. 70 & 75<br />
HXE4B<br />
Battery Hydraulic Tool, p. 72<br />
HX3 or UDT3<br />
Hand <strong>Tools</strong>, p. 70 & 75<br />
EHCY<br />
Electric/Hydraulic Tool, p. 76<br />
HXE4-R<br />
Battery Hydraulic Tool, p. 73<br />
PHX3<br />
Pneumatic Tool, p. 75<br />
GMT Tool Series Options<br />
DCT Tool Series Options<br />
GMTxxx<br />
Hand Tool, p. 102<br />
DCT4<br />
Hand Tool, p. 106<br />
GMTExxx-R<br />
Battery Hydraulic Tool, p. 105<br />
GMTEBxxx<br />
Battery Hydraulic Tool, p. 104<br />
DCTE4B<br />
Battery Hydraulic Tool, p. 106<br />
* Pneumatic or Hydraulic tool options preferred for 10-12 AWG Range.<br />
PAGE 118<br />
www.DMC<strong>Tools</strong>.com © Copyright 2012 <strong>Daniels</strong> Manufacturing Corp. ALL RIGHTS RESERVED.