Daniels Tools Catalogs - Interstate Connecting Components

Battery Powered Hydraulic Indent Crimp Tools
Get the Portability of a Hand Tool with the Stamina of a Power Tool!
DMC is pleased to present our battery powered hydraulic tools to crimp MIL-C-39029, MIL-C-39012, and a full range of
proprietary contacts onto copper and aluminum cable 12 through 26 AWG. These tools are comparable to DMC’s
AF8 (M22520/1-01) hand tool and use the same turret heads, positioners, and other accessories.
AFE8B
The AFE8B Battery Powered Hydraulic
Indent Crimp Tool is a hand held,
self-contained indent crimp tool. The
crimp head, battery, and pump unit
are contained in one ergonomic tool
body and weighs about 4 pounds. It is
comparable to DMC’s AF8 hand tool and
uses the same turret heads, positioners,
and other accessories.
TOOL INCLUDES: Carrying Case, Two
18v Batteries (p/n HDE-LI-B), One Battery
Charger (p/n HDE-LI-120C).
AFM8, M3XX & MHXX
Battery Powered
Tools
At the time this catalog was printed,
DMC’s Engineers were developing
battery powered versions of our
AFM8 (M22520/2-01), M-Series and
MH-Series hand tool frames. Contact
DMC, or check our Web site for the
status of these tools.
FEATURES
• Ergonomic design allows
one-handed operation
• Indenters automatically open
when crimp is complete
• Head rotates 350 degrees
• Red LED to display unit’s
current status
CRIMP CAPACITIES
• Max. Crimp Force: 1.5 Tons
(13.3 kN)
• Avg. Crimp Time: 2 seconds
• Avg. Crimps per Charge:
Approx. 150 (depending on size and
type of contact wire
AFE8B SPECIFICATIONS
• Length: 14.75” (375 mm)
• Width: 2.87” (72.9 mm)
• Depth: 4.5” (114.3 mm)
• Mass/Weight (w/ battery): 3.92lb (1.78kg)
• Sound Level: 75db (A) at 1 meter
• Vibration: