Daniels Tools Catalogs - Interstate Connecting Components
Daniels Tools Catalogs - Interstate Connecting Components
Daniels Tools Catalogs - Interstate Connecting Components
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Wire Harness <strong>Tools</strong><br />
WIRE HARNESS SPOON<br />
DMC’s Wire Harness Spoon is used to<br />
assist in inserting new wires into existing<br />
wire harnesses. It helps thread new or<br />
repaired wires under tight cable ties, zip<br />
ties, string ties and cushion clamps.<br />
The plastic construction of the wire<br />
harness spoon reduces damage when<br />
inserting wires because it will not damage<br />
ties or adjacent wires. There is less<br />
chance of nicks or cuts than with a<br />
metallic wire harness spoon. It can<br />
also be used to isolate cable ties<br />
for safe cutting to prevent damage<br />
to wire insulation.<br />
The WHS-1 is Orange in color<br />
and .875” wide by 6” long.<br />
CABLE TIE REMOVAL TOOLS<br />
Now you can quickly remove cable ties without damaging<br />
the wire harness. The safety guards on the tip of the MG cable<br />
tie removal tools slide behind the cable tie strap to prevent<br />
the sharp blades from contacting and damaging the bundled<br />
items. The ergonomic, cushion grip handles and scissor action<br />
produce a clean cut.<br />
Also use the MG series cable tie removal tools when repairing<br />
and retrofitting wire harnesses & hose assemblies, removing<br />
packaged items, prototyping & testing products, and many<br />
other factory and field uses.<br />
These cable tie removal tools provide a long life when cutting<br />
plastic, thin copper wire, and aluminum wire AWG 10 & smaller.<br />
Each tool is made of heat treated alloy steel with a Rockwell<br />
hardness range of 53-58Rc.<br />
Part<br />
Number<br />
Cuts Cable<br />
Tie Sizes<br />
Tool<br />
Length<br />
Tool<br />
Width<br />
Description<br />
MG-1000 18 lb. to 250 lb. 5.80" 1.67" Short Handle<br />
Length with Pointed<br />
Nose for Small<br />
Hands and Tight<br />
Spaces<br />
MG-1100 18 lb. to 250 lb. 6.49" 2.35" Standard Handle<br />
Length with Pointed<br />
Nose for Tight<br />
Spaces<br />
MG-1200 18 lb. to 250 lb. 6.22" 2.63" Standard Handle<br />
Length with<br />
Rounded Nose for<br />
Standard Use<br />
Cutting Tip View<br />
© Copyright 2012 <strong>Daniels</strong> Manufacturing Corp. ALL RIGHTS RESERVED. www.DMC<strong>Tools</strong>.com<br />
PAGE 117