Daniels Tools Catalogs - Interstate Connecting Components
Daniels Tools Catalogs - Interstate Connecting Components
Daniels Tools Catalogs - Interstate Connecting Components
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
HC134 Dieless Four Indent Crimper<br />
HPU11M Air Powered Hydraulic Pump<br />
HPU11M (MS25441-5) Air Powered<br />
Hydraulic Pump is the most economical<br />
and efficient way to provide controlled<br />
hydraulic pressure for XHD51 and<br />
TBHD1M remote crimp heads and<br />
similar applications. The use of lightweight<br />
materials and the latest airover-hydraulic<br />
technology makes the<br />
HPU11M the best choice.<br />
The HPU11M has heavy duty<br />
couplings and is intended to be<br />
used with the 12-4040 hydraulic<br />
hose assembly.<br />
The specifications are the following:<br />
• Maximum output pressure 10,000 PSI<br />
(Can be reduced by reducing input<br />
air pressure.)<br />
• Depth: 11.5 inches<br />
• Width: 13.75 inches<br />
• Height: 6.25 Inches<br />
• Weight: 19.4 pounds (with hose and<br />
hydraulic fluid)<br />
• Hydraulic/air ratio is 100:1, input air<br />
pressure: 30–125 psi (2.1–8.6 bar)<br />
HPU Series Pumps<br />
We offer two portable manual pumps:<br />
a hand pump (p/n HPU12M) and a<br />
foot pump (p/n HPU15M). The other<br />
powered options are: an AC electric<br />
pump (p/n HPU14M & HPU14M-230)<br />
and a DC battery powered pump (p/n<br />
HPU13M). A heavy duty hose and couplings<br />
complete the connection between<br />
pump and crimper (p/n 12-4040).<br />
HPU11-PG In-Line Hydraulic Pressure<br />
Gauge is recommended for cycle control<br />
monitoring, when using Remote<br />
Crimp Heads.<br />
HC134 DIELESS FOUR INDENT CRIMPER<br />
HC134 Dieless Four-Indent Hydraulic<br />
Crimper is a four-indent crimper that can<br />
self adjust to the application. The tool<br />
provides a symmetrical four-sided crimp<br />
(at 90º intervals), and the crimp pressure<br />
against the resistance of the metal<br />
conductor assembly will cause the tool<br />
to crimp to a depth where there is metal<br />
to metal bottoming (gas tight crimp joint<br />
on aluminum and soft copper). Dies of a<br />
particular configuration are not needed.<br />
The HC134 produces 7 tons. The<br />
range of crimping capabilities starts with<br />
small conductors (around 1 ⁄4 inch in diameter)<br />
to 4/0 AWG conductors on copper,<br />
and 750 MCM applications on aluminum.<br />
Triangle indenter shape is standard.<br />
Optional indent designs are available.<br />
Consult DMC.<br />
FEATURES<br />
• Length: 24 inches (610 mm)<br />
• Weight 13.0 pounds (5.9kg)<br />
• Crimp force: 7.0 tons (62.28kN)<br />
• Automatic relief valve to prevent over-compression<br />
• Release lever for opening dies<br />
• 360º rotating head for ease in<br />
confined work areas.<br />
• Advance close by rotating handle.<br />
DMC59 Utility Conductor Repair Kit<br />
(NSN 5180-01-220-1807)<br />
A complete repair and service kit for aluminum and soft<br />
copper conductor maintenance. This tool kit contains the<br />
HC134 Crimper and a range of splices and high performance<br />
terminals (all two bolt type for high vibration), in a rugged<br />
metal box.<br />
PAGE 116<br />
www.DMC<strong>Tools</strong>.com © Copyright 2012 <strong>Daniels</strong> Manufacturing Corp. ALL RIGHTS RESERVED.