Daniels Tools Catalogs - Interstate Connecting Components
Daniels Tools Catalogs - Interstate Connecting Components
Daniels Tools Catalogs - Interstate Connecting Components
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DCT Series Crimp <strong>Tools</strong><br />
DMC provides custom and standard crimp tools that are<br />
manufactured to connector OEM or user requirements. Often<br />
these tools are specified as comparable in function to the OEM<br />
connector supplier tool.<br />
The DCT series of crimp tools and dies accommodate most<br />
(insulated and uninsulated terminals and splices conforming<br />
to AS7928 insulated and uninsulated as well as numerous<br />
proprietary configurations. Dies in various crimp patterns are<br />
also available for D-Subminiature, circular connectors, Red/<br />
Blue/Yellow “Heat-N-Seal” terminals, “MiniSeal” terminals, and<br />
low profile environmental splices (M81824/1-XX).<br />
Dies are configured with single, double, triple and even<br />
quadruple crimp cavities.<br />
Several models and types of tools comprise the DCT tool<br />
series. Some tools have removable (interchangeable) dies, and<br />
others have fixed cavities that are not removable.<br />
If your application requirement is not already covered by one<br />
of our standard die sets, our engineering department will be<br />
pleased to discuss a design to suit your needs, consult DMC<br />
for details.<br />
DCTE4B-xxx Series Battery Powered<br />
Hydraulic Crimp Tool<br />
The DCTE4B Battery Powered Crimp <strong>Tools</strong> offer the<br />
portability of a hand tool with the stamina of a power tool!<br />
They are hand held, self-contained hydraulic crimp tools<br />
intended for use with DMC’s “DCT4” Dies.<br />
The DCTE4B battery tools are approximately 13.25” long,<br />
2.87” wide, and 4.5” deep, weigh 2.8 lb with the battery<br />
installed.<br />
TOOL INCLUDES: Carrying Case, Two 18v Batteries (p/n<br />
HDE-LI-B), One Battery Charger (p/n HDE-LI-120C).<br />
FEATURES<br />
• Ergonomic design<br />
allows one-handed<br />
operation<br />
• Die automatically<br />
opens when crimp<br />
is complete<br />
• Head rotates 350°<br />
• Red LED to display<br />
the current status<br />
of the unit<br />
• Accepts dies from other<br />
sources (consult DMC)<br />
• Positive Cycle Control<br />
Pressure Sensing Design<br />
DCT4-xxx Series Hand Crimp <strong>Tools</strong><br />
The sturdy construction of the DCT hand tools is superior<br />
to any tool made today. The handle will not flex or bend in any<br />
direction, therefore the maximum force and repeatability are<br />
achieved. The precision ratchet controls cycling of the tool and<br />
assures the same accurate crimp every time. The handle grips<br />
and the leverage system are designed for maximum ergonomic<br />
benefit.<br />
The DCT tools are approximately 9 3 ⁄4" x 3 1 ⁄8" x 1 1 ⁄4" and weigh<br />
1.38 lbs.<br />
www.DMC<strong>Tools</strong>.com © Copyright 2012 <strong>Daniels</strong> Manufacturing Corp. ALL RIGHTS RESERVED.