Daniels Tools Catalogs - Interstate Connecting Components

Battery Powered Hydraulic GMT Series Crimp Tools
DMC is pleased to present our GMT
Series battery powered hydraulic tools to
crimp open barrel (stamped and formed)
contacts, insulated and non-insulated
terminals, splices, and end caps, coaxial
connectors, and wire fittings of all types
are covered by these tools. Just like with
the hand tools, locators are included for
applications where they are needed to
hold contacts in the correct location for
optimum crimping.
GMTEBxxx
The GMTEBxxx Series Battery
Powered Hydraulic Commercial Standard
Crimp Tools are hand held, self-contained
crimp tools. The crimp head, battery, and
pump unit are contained in one ergonomic
tool body and weigh about 4 pound each.
They are comparable to DMC’s GMT
Series hand tools.
TOOL INCLUDES: Carrying Case, Two
18v Batteries (p/n HDE-LI-B), One Battery
Charger (p/n HDE-LI-120C).
FEATURES
• Ergonomic design allows
one-handed operation
• Jaws remain closed under
spring pressure (pinch sides
to open/load
• Head rotates 350 degrees
• Red LED to display the charge
status of the battery
CRIMP CAPACITIES
• Max. Crimp Force: 4 Tons
(35.6 kN)
• Avg. Crimp Time: 3 seconds
• Avg. Crimps per Charge: 100
• Avg. Charge time: 15 minutes
SPECIFICATIONS
• Length: 13" (330 mm)
• Width: 2.87" (72.9 mm)
• Depth: 4.5" (114.3 mm)
• Weight (with battery): 2.8 lb
(1.3 kg)
• Hydraulic Oil: Shell Tellus®
T-15 (or equivalent)
GMTEB232 for M81824/1-XX
Environmental Splices
GMTEB232 Tool is the battery
powered version of our GMT232
(M22520/37-1) hand tool for low profile
environmental splices (M81824/1-XX).
The GMTEB232 is the most popular
GMT Series tool to cover the range
of 12 (yellow), 16 (blue), and 20 (red)
splices for low profile environmental
splice applications. This precise tool has
a locator which is configured to hold the
splice in the correct location while either
wire is being terminated.
PAGE 104
www.DMCTools.com © Copyright 2012 Daniels Manufacturing Corp. ALL RIGHTS RESERVED.