Technical Specification X-ray tube 20F75W (1.510) - Petrick-GmbH
Technical Specification X-ray tube 20F75W (1.510) - Petrick-GmbH Technical Specification X-ray tube 20F75W (1.510) - Petrick-GmbH
90,0° ± 0,5°<br />
max. 73,0<br />
Design changes in the sense of the development reservations<br />
30,0 +0,1<br />
-0,1<br />
<strong>Petrick</strong><br />
<strong>Technical</strong> <strong>Specification</strong><br />
X-<strong>ray</strong> <strong>tube</strong> <strong>20F75W</strong> (<strong>1.510</strong>)<br />
1. Geometry: Drawing for assembling<br />
2. Target angle: 20°<br />
3. Inherent filtration: Be-Windows 75 µm<br />
4. Type of operating: DC<br />
5. Focal spot: 2 x 1 mm ± 0,2 mm<br />
at IRö = 1 mA<br />
6. Operating point: URö = 2,3 kV, IRö = 1 mA<br />
UH = 3,80 V, IH = 1,25 A<br />
7. Filament heating: IH max = 1,40 A<br />
8. max.operating voltage: 50 kV<br />
9. max.rating: 1 mA<br />
10. Exposure time: Duration-drive (Operating point)<br />
11. Heat capacity: 5200 Joule<br />
12. Power continuesly: 50 W<br />
13. Anode material: Tungsten<br />
1_510<br />
14,0°<br />
ø 2,1<br />
M 2<br />
ø 30,2 +0,1<br />
-0,1<br />
10,0<br />
Ø 10,0<br />
42,5 +0,1<br />
-0,1<br />
M 4<br />
Ø 30,00 +0,25<br />
-0,25<br />
31.073<br />
LI6Y VZ UL 1538/CSA<br />
1 x 0,24/1,2 weiß<br />
l = 400<br />
<strong>GmbH</strong><br />
33.073<br />
LI6Y VZ UL 1538/CSA<br />
1 x 0,24/1,2 braun<br />
l = 400<br />
Ø 16,8 +0,1<br />
-0,1<br />
3,0<br />
Ø 18,9 +0,1<br />
-0,1<br />
Ø 34,0<br />
M 1:1<br />
Page 2 from 3
<strong>20F75W</strong><br />
Radiation protection<br />
Ba<br />
-Emitter can emit harmful X-<strong>ray</strong>s<br />
-There is a danger of implosion<br />
1_510<br />
-User is account for personal protection by a housing<br />
<strong>Petrick</strong><br />
<strong>GmbH</strong><br />
Mo<br />
Ni<br />
Monel<br />
W<br />
Be<br />
Cu<br />
X-<strong>ray</strong><br />
FeNiCo<br />
Glass<br />
Page 3 from 3