R E A L I Z E - Lithonia Lighting

R E A L I Z E
Relight Series Renovation Products
to meet all of your renovation needs

Realize
YOUR BUILDING’S POTENTIAL
The RENOVATION challenge
Renovating your lighting should deliver:
• Revitalized look of the space
• Enhanced lighting quality
• Reduced energy and maintenance costs
• Greener, more sustainable materials
• Ability to upgrade lighting without disrupting
operations or existing installation
after
Traditional solutions fall short:
RELAMPING with lower-wattage components will
reduce energy consumption, but leaves the dated
look of old lenses or aluminum louvers which often are
dirty and fingerprint-laden.
RETROFITTING with specular reflectors and a reduced
number of lamps lowers maintenance requirements
and saves energy, but creates harsher, more focused
lighting that degrades the lighting environment in
addition to leaving the dated lens or louver in place.
REPLACING existing fixtures delivers energy savings,
refreshes the space and delivers enhanced quality of
light. Unfortunately the removal of existing fixtures
and demolition required disrupt normal business
activities. In addition, replacements generate the extra
expense of more labor and new fixtures.
The
solution
With our relight solution, occupants will notice a
marked improvement in how your space looks and
feels. You’ll enjoy savings and reduced maintenance
costs in a greener, more sustainable building. These
goals can be accomplished cost effectively and
with minimal disruption to your business.
before
two 2

RELIGHT and realize dramatically reduced energy and maintenance costs – in an
environmentally sensitive and cost-effective manner.
REUSE
REDUCE
RECYCLE
Leave the fixture housing and
wiring in place to reuse with the
new kit. No need to enter the
ceiling or rewire.
Upgrade internal fixture
components with relight
assembly containing fewer,
longer-life lamps – and reduce
your energy use by 67%.
Recycle aluminum louver, channel
cover, lamps and ballasts in an
environmentally friendly way.
IMPROVE THE LOOK of your space and your ceiling WITHOUT THE HASSLES of full-fixture replacement.
SAVE on total energy used and maintenance required.
TOTAL WATTAGE CONSUMED (per fixture)
NUMBER OF LAMPS REPLACED
OVER 10 YEARS (per fixture)
16 0
4
ENERGY SAVINGS!
up to
LONGER
12 0
65%
3
LAMP
LIFE!
80
2
40
1
0
0
4-lamp T12 2 33-lamp T8 T5 RELIGHT T8 RELIGHT T8L RELIGHT 4-lamp T12 3-lamp T8 T5 RELIGHT T8 RELIGHT T8L RELIGHT
Assumes 4,000 hours annual operation and 50% lamp failure at manufacturers’ rated life.
PATENT PENDING
3
three

Relight YOUR ENVIRONMENT
with RT volumetric lighting
A REFRESHING change
• RT relight fixtures bring a refreshing look to your ceiling and your space
• Smooth lines and measured proportions of RT luminaires create a pleasing look
without drawing undue attention to the ceiling
• For easy one-to-one fixture upgrades, RT renovation kits help you realize your building’s
potential without replacing the entire lighting system
An ENGAGING atmosphere
• Creates a more pleasant environment, eliminating the shadowy cave
effect created by parabolic lighting
• Controlling high-angle light, RT fixtures help eliminate glare for the most widely used monitors
An EFFICIENT operation
• Energy consumption is lowered by up to 60% compared to T12 fixtures
• Fewer, longer-life lamps result in reduced maintenance and disposal costs
• Step-dim or full-range control options provide operational efficiency
four 4

RT5R
for parabolics
The RT5R Relight assembly is an ideal solution for renovating obsolete
parabolic lighting to reduce energy consumption and lower operating and
maintenance costs. It delivers a higher quality of lighting and refreshes
the space. RT5R is suitable for installation in place of any 2’x4’ or 2’x2’
parabolic with at least 4-3/8” depth.
T5
RT5RT
for lensed troffers
The RT5RT Relight assembly provides the same volumetric lighting and T5
lamp advantages as the RT5R, but in a more compact package that will fit
into nearly all older lensed troffers. The RT5RT is compatible for installation
in lensed troffers with a minimum depth of 3-1/2” (consult specifications for
exact requirements).
T5
RT8R
for parabolics
The RT8R combines the all of the advantages of volumetric lighting with
the performance and cost advantages of high-performance T8 lamps and
ballasts. It is compatible with nearly all installed parabolic fixtures.
T8
RT8RT
for lensed troffers
The RT8RT also takes advantage of high performance T8 solutions to
provide a retrofit assembly for most existing lensed troffers. Huge energy
savings can be gained while greatly improving the quality of light for the
people in the space. It is compatible with most lensed troffers with a
depth of at least 3-1/2” (consult specifications for exact requirements).
T8
PATENT PENDING
5
five

Performance RELIGHTING
with ES8 lighting
Visible IMPROVEMENT
• Properly balances horizontal light with adequate illumination of vertical surfaces
• Eliminates harsh shadows and creates a more open, spacious feeling
Operational EFFICIENCY
• Highly efficient operation and components allow ES8 fixtures to
deliver light levels at 0.60 watts per square foot
• Reduces energy usage by 67%, when compared to four-lamp T12 fixtures
• The step-dim option allows automatic or user-controlled multi-level lighting
Environmental SUSTAINABILITY
• Reuse existing housings to minimize waste
• Reduce lamps and waste by 50%
• Eliminate 750 pounds of CO 2 per fixture, per year
• Easily recycle the durable, all-steel-construction materials
six 6

ES8R
for parabolics
The ES8R assembly is an ideal solution for relighting parabolic
installations when a one-for-one upgrade is desired. Energy
consumption is reduced dramatically while the quality of light is
improved. The ES8R is designed to retrofit 2’x4’ or 2’x2’ fixtures
with at least 4-3/8” depth.
T8
ES8RT
for lensed troffers
The ES8RT assembly offers more flexibility to provide louvered
performance and energy savings in a more compact package.
The ES8RT is designed to retrofit 2’x4’ or 2’x2’ fixtures with at
least 3-7/8” depth.
T8
PATENT PENDING
7 seven

Ordering Information
T5
Series
Lamp Type
Voltage
Ballast
2RT5R
Recessed volumetric
relight for parabolics
2RT5RT
Recessed volumetric
relight for lensed troffers
28T5 2-lamp, 28W (2x4)
54T5HO 2-lamp, 14W (2x4)
14T5 2-lamp, 14W (2x2)
24T5HO 2-lamp, 24WHO (2x2)
MVOLT 347
GEB95
GEB95S
GEB115
GEB115S
PS, high efficiency,
.95bf (normal)
PS, step-dimming
high efficiency,
.95bf (normal)
PS, high efficiency,
1.15bf (high)
PS, step-dimming
high efficiency,
1.15bf (high)
GEP10PS
PS, 1.0bf for T5HO
lamps
T8
Series
# of Lamps/Wattage
Voltage
Ballast
2RT8R
Recessed volumetric
relight for parabolics
232
217
2-lamp, 32W (2x4)
2-lamp, 17W (2x2)
(blank) MVOLT
347 347 volts
BILP
BINP
IS, high efficiency,
.78bf (low)
IS, high efficiency,
.88bf (normal)
2RT8RT
Recessed volumetric
relight for lensed troffers
2ES8R
Recessed louvered
relight for parabolics
BIHP
BSNP
IS, high effiiciency,
1.20bf (high)
PS, step-dimming
high efficiency,
.88bf (normal)
2RT8RT
Recessed louvered
relight for lensed troffers
Examples: 2RT5R 28T5 MVOLT GEB95
2RT8RT 232 BSNP
2ES8R 232 347 BINP
One Lithonia Way | Conyers, GA 30012 | TEL 800 858 7763 | www.lithonia.com/relight © 2009 Acuity Brands Lighting, Inc. All Rights Reserved 10/09 GF7001 Form No. 134.36