Labortops 2_2015_EN

Labortops 2/2015
LABORTOPS
valid until 15 th July 2015
Vortexer
with universal attachment
Further details on page 5
Digital Anemometer 2
Thermometers/Timers 2
Burners and accessories 3
LLG Labware Instruments 4-5
Wipes, cleaning rolls 6
Nitrile gloves 7
Lab coats 7
Muffle furnaces 8
Porcelaine 8
Heating mantles 8
Shaking water baths 9
Centrifuge tubes 10
Filter units 11
Bottletop dispensers 11
Volumetric pipettes
Measuring cylinders
12
12
Samplers 13
Dippers 13
Disposable syringes 14
Lab helpers 14
Laboratory bottles 15
Cell density meter DSM 16

Analytical measurement
For more articles see our Laboratory Catalogue from page 368,
379, 381, 389 onwards
Digital Anemometer
Digital Anemometer to measure wind speed
and temperature. Useful for the functional
check of fume hoods and safety cabinets.
- Wind speed range: 0 to 30 m/s
- Wind temperature range: -10 to 45°C
(14 to 113°F)
- Current/MAX/Average wind speed reading
- Wind speed units: m/s, km/h, ft/min,
knots, mph
- Temperature display in °C/°F
- LCD backlight display
- Auto/Manual power off
- Battery: 3V CR2032 (included)
LLG Min/Max Thermometer with
outdoor sensor
Digital thermometer with outdoor sensor.
- Two-tier LCD display
- Measuring temperature range -50°C to +70°C
- Display resolution 0.1°C
- Accuracy ±1°C
- Dimensions 110 x 70 x 20mm
- Display size 40 x 30mm
- AAA 1.5V battery included
- Length of the cable 190cm
Cost-efficient!
-30%
Type PK Cat. No. Price Now
EUR
EUR
Digital Anemometer 1 LT6264198 39,00 27,30
-30%
Type PK Cat. No. Price Now
EUR
EUR
LLG Min/Max Thermometer with outdoor sensor 1 LT9243165 11,00 7,70
LLG Timer with White Board, 4 channel
Infrared Thermometers TFI 250
®
L A B W A R E
Special Price!
Non-contact measurement of the surface temperature with infrared. Ideal for
fast and secure measurements of moving or energized parts and food. With
batteries and factory calibration certificate.
Specifications
Measurement range:
-60°C to +550°C
Accuracy:
±2°C or 2% (at 0°C to +550°C), whichever is
larger
Resolution:
0.1°C
Optical resolution: 12:1
Operating temperature: 0°C to +50°C
Response time:
1sec
Emissivity factor:
0.95 fixed (0.1 to 1.0 possible)
Dimensions (L x W x H): 153 x 115 x 48mm
Weight (with batteries): 177g
Battery:
2 x 1.5V AAA, replaceable
Protection class: IP 20
-12%
Type PK Cat. No. Price Now
EUR
EUR
TFI 250 1 LT9908031 55,00 48,40
Useful!
This four channel timer has a built in white board that helps keep track of time
and other critical information.
- Audible alarm for each channel
- Built in white board and dry erase marker with eraser tip (included) helps
keep track of crucial information
- Programs: hours/minutes; Displays: hours/minutes/seconds
- Switchable timing capacity: 23 hours: 59 minutes/59 seconds
- Timer accuracy: ±5 seconds/day
- Count direction: up/down; displays elapsed time after countdown
- Last time set memory
- Key press confirmation feature gives an audible indication of data entry
- Lay flat on a bench, use the flip-open stand for a vertical view, or use the
magnetic back for metal surface attachment
- Requires two AAA batteries (included)
- Individually tested, inspected, and calibrated using NIST
- Includes Certificate of Calibration with unique report number, stated
corrections and standard used for the calibration, and multi-language
instructions (English, French, German, Italian, Portuguese and Spanish)
- CE-mark, RoHS compliant
-30%
Dimensions (WxDxH):
114.3 x 88.9 x 25.4mm
Type PK Cat. No. Price Now
EUR
EUR
LLG Timer with White Board, 4 channel 1 LT6266706 62,50 43,75
2

Burners
For more articles see our Laboratory Catalogue from page 129 -
137 onwards
Electric laboratory burner
Teclu burners
+ +
1 3
2
3
1
9.018 603
Teclu burner with stopcock and pilot flame DIN (NG-2411 BO0033).
DIN 30665-1.
-16%
Height Weight Description PK Cat. No. Price Now
mm g EUR EUR
165
360 for natural gas
1 LT9018311 43,80
36,79
165
360 for propane gas
1 LT9018312 43,80
36,79
Bunsen burners
Bunsen burner with needle valve and pilot flame DIN (NG-2411 BO0031). DIN
30665-1.
Height Weight Description PK Cat. No. Price Now
mm g EUR EUR
150
300 for natural gas
1 LT9018313 32,50
27,30
150
300 for propane gas
1 LT9018314 32,50
27,30
Safety tripod for laboratory gas burners
Combined tripod and laboratory gas burner for enhanced
practicality and safety. No risk of the tripod or burner toppling
over anymore! No risk of the burner flame dangerously moving
about anymore! Assembly is very easy - just attach the stand
base to the internal thread under the bottom of the gas burner
using the screw provided.
The safety tripod is suitable for use with DIN laboratory
gas burners made by the Juchheim company only (please
order gas burner separately).
-10%
Type PK Cat. No. Price Now
EUR
EUR
TECLU Unit with adapter screws 1 LT6265849 43,80 39,42
Tubing for gas burners
According to DIN 30664 section 1. Without
reinforcement and jacket. Connecting line for
connecting between safety gas connection fitting
according to DIN 3383-4 and gas burners for
laboratories according to DIN 30665 section 1.
For all gases according to DVGW worksheet G 260,
at pressures up to 100 mbar and temperatures up
to 70°C. Installations according to DVGW-TRGI
2008 and DVGW worksheet G 621.
DVGW Reg.-No. NG-4607AU2366.
Supplied per metre.
Int.
Wall
PK Cat. No. Price Now
diam. thickness
mm mm EUR EUR
10 2.00 1 LT9018970 12,20 8,54
2
-16%
3
-30%
Simple power supply through the electrical connector with an integrated switch
for power on/off, no dangerous gas supply or risk of a gas leak
- Electrical power supply instead of gas
- Fast heat up without a flame
- Highest level of security as operated through an RCD: suitable for education
- No waste or storage of gas cartridges
- Continuous power regulation through the optional power regulator
- Heat protection through the optional glass support: deposition for dishes and
flasks
- Additional safety stand offers improved protection
- Clean odourless working in regular atmosphere without a flame
The components need to be ordered separately.
Specifications
Power supply:
590W/230V
Dimensions (diam. x H): 125 x 180mm
Weight:
800g
Max. temperature: 900°C
Heated area:
diam. 38mm
-22%
Type PK Cat. No. Price Now
Electric laboratory burner
Power regulator for electric laboratory burner
Glass support for electric laboratory burner
Safety glass support for electric laboratory burner
1
1
1
1
LT9018601
LT9018602
LT9018603
LT9018604
Piezoelectric gas lighter, Clipper
Piezoelectric.
9.018 601
9.018 604
EUR
278,00
124,00
73,00
107,00
EUR
216,84
96,72
56,94
83,46
-30%
Type PK Cat. No. Price Now
EUR
EUR
Piezoelectric gas lighter, Clipper 1 LT9018820 14,60 10,22
3

LLG Labware Instruments
LLG- Magnetic stirrer uniSTIRRER 1
®
LLG- Magnetic stirrer with
heating uniSTIRRER 5
®
L A B W A R E
L A B W A R E
Ideal for laboratory workbenches!
No sample heating!
IP65 - spray desinfection is possible
An ultra-flat inductive magnetic stirrer without heating for applications in
biology and biochemistry.
The modern magnet coil technology consists only of non-moving parts and
therefore guarantees a wear-free drive. No heating of the probes.
For a better mixing of samples it is possible to change the direction of rotation
every 30 seconds.
- 100% wear- and maintenance-free inductive drive
- LED-display for an exact adjustment of the rotation speed
- Digital regulated rotation speed
- Alteration of the stirring direction
- High protection class IP 65
- Stainless steel surface
Delivery includes: magnetic stirrer, power cable, adapters for UK and US.
Universal magnetic stirrer with an
outstanding price-performance ratio. Safety
features include a ”hot“ warning display and
a stirring function that continues to run until
the plate temperature is below 50°C, even
when the device is switched off. A digital
timer enables unattended operation and can
be set from 1min to 99h 59min. When the
set time has elapsed, the unit stops
automatically. An integrated control function
offers precise control of the heated fluid
temperature via a remote PT1000
temperature probe. The device is equipped
with a 135mm ceramic plate, suitable for
the LLG- Universal reaction block systems.
- Latest generation magnetic
stirrer/hotplate
- Maintenance-free, brushless DC motor
- Timer (1min to 99h 59min)
- Digital control and backlit display
- Stirrer and display can be controlled
remotely via an RS232 interface
- Hot surface indicator
- White ceramic-coated, stainless steel top
plate
- Sturdy metal housing, IP42-rated
- Powerful stirring
- Connection for PT1000, integrated control
function
Delivery includes: Magnetic stirrer with
PT1000 probe, rod and holder, user manual.
Built-in timer
Cost-efficient package
Power-supply independent
"HOT" warning
Specifications
Stirring quantity (H2O):
800ml
Speed range:
15 to 1500rpm
Permissible ambient temperature: 5 to 40°C
Magnetic bar:
max. 25mm
Display:
LED
Heating plate:
94mm diam./ Stainless steel
Dimensions (WxDxH):
121 x 165 x 12mm
Weight:
0.5kg
Power supply:
100 - 230V, 50/60Hz
Protection class: IP 65
Guarantee:
3 years
-30%
Type PK Cat. No. Price Now
EUR
EUR
uniSTIRRER 1 1 LT6263420 159,00 111,30
Specifications
Stirring quantity (H2O):
20l
Speed range:
100 to 1500rpm
Permissible ambient temperature: 5 to 40°C
Magnetic bar:
80mm
Display accuracy:
±1rpm
Display:
LCD
Heating plate:
diam. 135mm/stainless steel with
ceramic surface
Temperature range: Ambient to 340°C
Setting accuracy:
±0.1°C
Control accuracy:
±0.2°C
Heat output:
550W
Safety temperature: 100 to 360°C
Dimensions (WxDxH):
280 x 160 x 85mm
Weight:
2.8kg
Power supply:
200 - 240V, 50/60Hz
Protection class: IP 42
Guarantee:
3 years
Type PK Cat. No. Price Now
uniSTIRRER 5 with EU-plug
uniSTIRRER 5 with UK-plug
1
1
LT6263440
LT6263441
EUR
495,00
495,00
-30%
EUR
346,50
346,50
4

LLG Labware Instruments
LLG- Vortexer uniTEXER with universal
attachment
LLG- Mini centrifuge uniCFUGE 3 with timer
and digital display
®
®
L A B W A R E
L A B W A R E
+
High stability
Speed adjustment
Unique universal attachment
- Vortexer with single carrier head, accommodating the most popular
consumables and tubes within the lab: for 1 x assay plate, 2 x 50ml conical
tubes, 2 x 15ml conical tubes, 4 x 1.5/2ml microcentrifuge tubes,
6 x 0.5ml or 24 x 0.2ml microcentrifuge tubes
- Carrier head is very easy to clean
- Variable speed, with rotary dial for fine speed control
- Elastomeric feet ensure excellent stability on the bench and quieter operation
- Modern design
- Robust, ABS housing
Built-in timer
Step less speed adjustment
Wear-free motor
A compact and reasonably priced mini centrifuge with brushless and
non-wearing high-efficiency motor. Stepless speed adjustment from
0 to 6000rpm. Microprocessor controlled regulation for load-independent
accuracy and integrated imbalance control. Integrated timer (0-25 minutes)
and high speed- constancy for reproducible results. Quick stop when the lid is
opened. 2 flow-optimised rotors for 8 x 1.5/2ml or 16 x 0.2ml tubes reduce
noise level and heat generation. Supplied with suction feet for a stable
operation.
Supplied with: Centrifuge, rotor for 8 x 1.5/2ml tubes, rotor for 16 x 0.2ml
tubes, adapter for 8 x 0.2/0.4/0.5ml tubes, and suction feet
Specifications
Type of movement:
orbital/vortex
Orbital diameter:
4.2mm
Speed range:
500 to 3000rpm
Dimensions (WxDxH):
173 x 198 x 198mm
Weight:
3.8kg
Protection class: IP 20
Supply requirements:
220 V, 50/60 Hz
Guarantee:
3 years
-30%
Type PK Cat. No. Price Now
EUR
EUR
uniTEXER 1 LT6261826 290,00 203,00
Specifications
Max. RCF:
Max. speed:
Accuracy speed:
Motor:
Max. load:
Dimensions (diam. x H):
Weight:
Power supply:
Guarantee:
2000xg
variable up to 6000rpm
±25rpm
brushless DC motor
8 x 1.5/2ml or 16 x 0.2ml PCR tubes
160 x 116mm
1.1kg
100 - 240V, 50/60Hz
3 years
Description PK Cat. No. Price Now
uniCFUGE 3 with EU-plug
uniCFUGE 3 with UK-plug
1
1
LT6263520
LT6263521
EUR
259,00
259,00
-30%
EUR
181,30
181,30
5

Cleaning
Economic Quality!
For more articles see our Laboratory Catalogue from page
1128 - 1131 onwards
LLG- Cellulose tissue in stacking layers
Wipes Multitex ® Ultra z 70
®
L A B W A R E
- Unbleached or highly bleached
- Dimensions: 400mm x 600mm
- Pack quantity: 1 x 5kg
-30%
Type PK Cat. No. Price Now
unbleached
highly bleached
Roll with 102 sheets (220 x 260mm).
- strong when wet, absorbent, low lint
1
1
LT9413210
LT9413211
LLG- Laboratory tissues, roll,
102 sheets 3-ply
®
L A B W A R E
EUR
32,40
44,70
EUR
22,68
31,29
-30%
Package
contents
PK Cat. No.
Price
Now
EUR
EUR
Roll of 102 tissues (bulk pack) 28 LT9413225 50,80
35,56
The high-quality viscose fleece with textile characteristics is suitable for wet
The cloths are very soft and yet lint-free. They can absorb large amounts of
liquid and remain tear-resistant. They are solvent-resistant and meet food
safety requirements. Multitex ® cloths can be washed out after cleaning,
wrung out, and reused.
Package
contents
12 bags of 76 tissues (350 x 300mm)
Roll of 500 tears (410 x 380mm)
Wipes Unitex ®
PK Cat. No. Price Now
12
1
LT6266674
LT6266675
EUR
131,90
105,30
-30%
EUR
92,33
73,71
LLG-Hand towel dispenser
®
L A B W A R E
White plastic, easy to refill, with window
to observe the filling level, suitable for
towels up to 245mm width, e.g. Cat No.
6.266 568
-14%
Width Height Depth PK Cat. No. Price Now
mm mm mm EUR EUR
280 375 137 1 LT7618375 30,20 25,97
Made from cellulose and polyester fibres, turquoise.
- Without binders, chemicals or adhesives
- Resistant to solvents and silicone free
- Particularly tear-resistant and lint free
- Useable dry or wet, high absorption capacity
- Excellent for cleaning and degreasing surfaces
Package
contents
Pack of 4 x 50 tissues (380 x 300mm)
Roll with 500 tears (390 x 325mm)
Wipes Multiclean ® , 3-ply
PK Cat. No. Price Now
4
1
LT6266676
LT6266677
EUR
44,40
96,90
-30%
EUR
31,08
67,83
LLG-Hand towels, 3-ply
L A B W A R E
Bright white, extra absorbent,
completely unfolding. Economic use
with high absorbency and
comfortable size. Matches with most
dispenser systems. Compatible with
LLG-Hand towel dispenser, Cat No.
7.618 375
Package
contents
®
-30%
Width Length PK Cat. No. Price Now
mm mm EUR EUR
20 Packs with 100 tissues 220 420 20 LT6266568 74,80 52,36
Multiclean ® cloths are always on hand when
surfaces must be thoroughly cleaned.
Multiclean ® plus is high-volume and thus
even more absorbent. The appropriate
holder, whether as floor stand or for wall
mounting are available on request.
Package
contents
2 rolls with 500 tears (220 x 380 mm)
2 rolls with 500 tears (380 x 380 mm)
Roll with 1000 tears (360 x 360 mm)
PK Cat. No. Price Now
2
2
1
LT7618013
LT7618212
LT7671903
EUR
18,90
27,20
25,20
-6%
EUR
17,77
25,57
23,69
6

Personal protection
For more articles see our Laboratory Catalogue from page 186,
218, 222, 236 onwards
LLG-Gloves ergo, Nitrile, powder-free
EN 374 EN 374 EN 420
®
L A B W A R E
LLG- Glove dispenser for 3 boxes,
acrylic glass
Dispenser for 3 boxes,
with front insert or
side slot. Mounting
equipment included.
Disposable protective glove in nitrile that when worn, combines the comfort
and ”feel“ of latex as well as the physical and chemical endurance of nitrile.
With no risk of allergies! The ideal glove for all applications requiring high
tactile sensation and protection against chemicals.
- Thin - comfortable to wear
- Tried and tested quality product made of nitrile
- Excellent resistance to skin irritants in foodstuffs
- Specially formulated for a more resilient glove
- For single use in applications with an increased need for safety when
handling chemicals
- Free from phthalates/softeners and allergenic latex proteins
- Easy to don and particularly skin-friendly through special finishing process
- Colour lavender blue
- Suitable for areas subject to HACCP standards
- Cat. III Low Chemical resistant. AQL 1.5
According to ASTM F 1671 (ISO 16604) tested for protection against viral
penetration.
According to EN 420. Suitable for food handling.
Glove shape:
Material:
Colour:
Outside:
Inside:
Size/total length:
Thickness (measured in double
layer):
flat with rolled edge (ambidextrous)
nitrile
lavender blue
textured fingers
powder-free halogenated
S, M, L, XL/med. 240mm
0.14mm
Size PK Cat. No. Price Now
S
M
L
XL
200
200
200
180
LT9006371
LT9006372
LT9006373
LT9006374
LLG- Glove dispenser, coated wire
EUR
24,60
24,60
24,60
24,60
-30%
EUR
17,22
17,22
17,22
17,22
Dispenser for 1 box, with top or side slot.
Mounting material included.
Description
Dimensions
PK Cat. No. Price Now
(W x D x H)
mm EUR EUR
top/side slot
side slot
9.405 371
180 x 85 x 140
265 x 90 x 155
1
1
LT9405371
LT9405372
14,40
17,10
9.405 372
-30%
10,08
11,97
Description
front insert
side slot
Dimensions
PK Cat. No. Price Now
(W x D x H)
mm EUR EUR
260 x 90 x 405 mm
1 LT9405373 74,30
52,01
280 x 87 x 460 mm
1 LT9405374 96,80
67,76
LLG-Lab coat, 100% cotton
- Very solid material, excellent wearing comfort
- Snap fasteners (press buttons); easy and quick to
open
- With fold-down collar
- One outside breast pocket and two side pockets
- Washable up to 60°C
- Lady's coat with stitched-down back belt
Material:
100% cotton
Colour:
White
Weight:
220 g/m² -30%
Size Description PK Cat. No. Price Now
36/38
40/42
44/46
44/46
48
50
52
54
56
Ladies coat
Ladies coat
Ladies coat
Mens coat
Mens coat
Mens coat
Mens coat
Mens coat
Mens coat
1
1
1
1
1
1
1
1
1
LT9414342
LT9414343
LT9414344
LT9414345
LT9414346
LT9414347
LT9414348
LT9414349
LT9414350
EUR
26,80
29,60
29,60
26,70
26,70
26,70
26,70
26,70
29,30
LLG-Safety eyeshields, "Evolution" and
"Evolution+"
EUR
18,76
20,72
20,72
18,69
18,69
18,69
18,69
18,69
20,51
- CE approved to EN166, EN170 and EN
172 for tinted lens
- Panoramic wrapping lens
Evolution
- 180° field of vision
- Frame made of tested hypo-allergenic
material
- Side arms adjustable in length
- Nose pad and arm tips are made from
soft, mouldable material offer optimal
comfort and individual customisation
Evolution+
- Rubber eyebrow protection for greater
shock absorption
- 100% UV protection (up to 400nm)
- Lightweight: only 30g
- Black/green
- Anti-scratch and anti-fog lens -30%
Type Lens PK Cat. No. Price Now
Evolution
Evolution+
clear, 2C-1.2 U 1 FT CE
smoke, 2C-3/5-3.1 U 1 FT N CE
-30%
1
1
LT9006010
LT9006000
EUR
11,40
13,10
EUR
7,98
9,17
7

High-temperature treatment
For more articles see our Laboratory Catalogue from page 106,
134, 854 onwards
Muffle furnaces series LE 1/11 - LE 6/11
LLG- Porcelain crucibles, DIN 12904
®
L A B W A R E
Special price!
- Tmax 1100°C, 1050°C working temperature
- Heating from both sides with heating elements in quartz tubes
- Multi-layer fibreboard insulation within the furnace
- Housing manufactured from high-grade textured stainless steel
- Folding door which can be used as a clipboard
- Exhaust air outlet in the furnace rear wall
- Silent, solid-state power control relay
- R6 controller supplied with models LE1 - LE4 with adjustable target
temperature. Models LE6 supplied with controller B150 (one ramp, one holding
time, delayed start time) or supplied with controller P300 (9 programmes each
with 4 ramps and holding times). Please choose the part number for the
combination required.
- Controller mounted in side space (LE1 - LE4 space saving under the door)
Optional:
- Chimney
- Chimney with fan or catalyser
- Temperature limiter
Type/Controller Capacity Rating Internal
PK Cat. No. Price Now
dimensions
(W x D x H)
litres kW mm EUR EUR
LE 1/11/R6
LE 2/11/R6
LE 4/11/R6
LE 6/11/B150
LE 6/11/P300
1
2
4
6
6
1.5
1.8
1.8
1.8
1.8
90 x 115 x 110
110 x 180 x 110
170 x 200 x 170
170 x 200 x 170
170 x 200 x 170
1
1
1
1
1
LT9764543
LT9764537
LT9764538
LT9764539
LT9764540
1.210,00
1.420,00
1.550,00
1.730,00
2.250,00
Standard heating mantles series KM-G
LabHEAT ® -Heating mantles for round bottom
flasks.” Flexible glass yarn heating element,
outer jacket in glass silk, with diam. 60mm
bottom out-let from 500ml, max. heating
element temperature 450°C, 1.5m power
supply (earthed) cable with heating-zone
switch and RCD (residual current detection),
nominal voltage 230V AC.
-12%
1.064,80
1.249,60
1.364,00
1.522,40
1.980,00
Special price! -23%
Capacity
Flask Rating Heating PK Cat. No. Price Now
diam.
zones
ml mm W EUR EUR
25
50
100
250
500
1000
2000
3000
4000
5000
6000
10000
20000
41
51
64
85
105
131
166
185
207
223
236
279
345
65
75
120
180
250
450
600
800
900
1200
1400
2000
2200
1
1
1
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
LT9642401
LT9642402
LT9642403
LT9642404
LT9642405
LT9642406
LT9642407
LT9642408
LT9642409
LT9642410
LT9642411
LT9642412
LT9642413
256,00
261,00
263,00
266,00
274,00
307,00
365,00
419,00
453,00
564,00
632,00
862,00
1.296,00
197,12
203,58
205,14
207,48
213,72
239,46
284,70
343,58
366,93
456,84
511,92
698,22
1.049,76
Glazed. Available in low, medium and tall form. Suitable for all applications.
Capacity
Ext. Height Form PK Cat. No. Price Now
diam.
ml mm mm EUR EUR
5
10
17
21
34
63
91
30
35
40
45
50
60
70
19
22
25
28
32
38
44
Low form
Low form
Low form
Low form
Low form
Low form
Low form
1
1
1
1
1
1
1
LT9250900
LT9250901
LT9250902
LT9250903
LT9250904
LT9250905
LT9250906
2,70
2,75
3,05
3,85
5,10
5,80
7,50
1,89
1,93
2,14
2,70
3,57
4,06
5,25
10*
12
20
30
45
80
120
200*
15
26
35
50
72
130
* Not to DIN
30
35
40
45
50
60
70
80
30
35
40
45
50
60
25
28
32
36
40
48
56
62
38
44
50
56
62
75
Medium form
Medium form
Medium form
Medium form
Medium form
Medium form
Medium form
Medium form
Tall form
Tall form
Tall form
Tall form
Tall form
Tall form
18/10 steel. Electro polished. With bow and gripping tips.
-30%
-30%
Length PK Cat. No. Price Now
mm EUR EUR
200
220
300
1
1
1
LT9310120
LT9310122
LT9310130
5,45
5,50
6,05
3,82
3,85
4,24
1
1
1
1
1
1
1
1
1
1
1
1
1
1
LT9250907
LT9250910
LT9250911
LT9250912
LT9250913
LT9250914
LT9250915
LT9250916
LT9250920
LT9250921
LT9250922
LT9250923
LT9250924
LT9250925
2,75
2,75
3,05
3,80
4,35
5,65
7,60
10,40
3,00
3,20
3,80
4,40
6,60
9,05
LLG-Porcelain lids for crucible, DIN 12904
Glazed.
1,93
1,93
2,14
2,66
3,05
3,96
5,32
7,28
2,10
2,24
2,66
3,08
4,62
6,34
-30%
Lid
Crucible DIN PK Cat. No. Price Now
diam.
diam.
mm mm EUR EUR
34
39
44
49
54
64
74
84
30
35
40
45
50
60
70
80
12904
12904
12904
12904
12904
12904
12904
1
1
1
1
1
1
1
1
LT9250930
LT9250931
LT9250932
LT9250933
LT9250934
LT9250935
LT9250936
LT9250937
3,45
3,50
3,65
4,00
4,35
5,20
5,60
5,80
2,42
2,45
2,56
2,80
3,05
3,64
3,92
4,06
Crucible tongs, 18/10 steel
8

Shaking water baths
For more articles see our Laboratory Catalogue from page 805,
863 onwards
Shaking water bath OLS26 Aqua Pro
Shaking water baths LSB12/18 Aqua Pro
Special price!
26L
Combined orbital/linear shaking bath
Combined orbital/linear motion in one bath, simply rotate tray carrier 180°.
- Excellent temperature stability and uniformity of ±0.1°C
- Adjustable shaking speed/intensity for application optimisation
- Set and Forget technology - fast heat-up accurate temperature control
- Extensive choice of trays for a wide variety of vessels. Trays sold separately
- Includes adjustable high temp cut-off/alarm, countdown timer, pre-sets,
calibration facility and dry start/run dry protection
- Discreet magnetically coupled shaking mechanism maximises working area
LSB18
18L
12L
LSB12
Specifications
Tank size:
26l
Minimum working depth:
70mm
Temperature range:
ambient +5 to 99°C (0 to 99°C with
accessory cooling)
Uniformity:
±0.1°C
Stability:
±0.1°C
Display:
2 x LED (individual displays & controls for
temperature and shaking speed)
Orbital and Linear shaking speed: 20 to 200rpm (depending on load)
Orbital shaking radius:
9mm
Shaking speed display resolution: 1rpm
Linear shaking stroke length: 18, 28 & 36mm
Shaking tray area:
380 x 235mm
Timer:
1 to 999min
Drain Tap:
yes
Supply voltage: 220-230V
-12%
Type PK Cat. No. Price Now
EUR
EUR
OLS26 1 LT6264683 3.450,00 3.036,00
LLG- Floating pellets, PP
Diameter 20mm, could cover 0.1m². Temperature stable up to +100°C.
Protect against evaporation and fast temperature loss.
Decrease hazardous vapours.
Resistant against most acids, bases, solvents and mineral oils.
-30%
Description PK Cat. No. Price Now
EUR
EUR
LLG- Floating pellets 250 LT6266611 28,90 20,23
Linear shaking water bath with high flexibility
- Reliable linear shaking mechanism for consistent results
- Excellent temperature stability and uniformity of ±0.1°C
- Simple controls, clear, bright display
- Set and Forget technology - fast heat-up accurate temperature control
- Extensive choice of trays for a wide variety of vessels. Trays sold separately
- Discreet magnetically coupled shaking mechanism maximises working area
- Advanced dry start/run dry protection - prevents costly service repairs
Specifications
LSB12/LSB18
Tank size: 12/18l
Minimum working depth:
60 mm
Temperature range: ambient +5 to 99°C
Display:
LED
Linear shaking speed:
20 to 200rpm (depending on load)
Shaking speed display resolution: 1rpm
Linear shaking stroke length:
20mm
External dimensions (WxDxH): 360 x 380 x 275/335 x 565 x 275mm
Dimensions Shaking trays (D x W): 240 x 235/420 x 235mm
Timer:
1 to 999 min
Drain tap:
yes
Supply voltage: 220-230V
Type PK Cat. No. Price Now
LSB12
LSB18
1
1
LT6264684
LT6264685
EUR
1.995,00
2.250,00
-12%
EUR
1.755,60
1.980,00
9

Life Science - Centrifuge tubes
For more articles see our Laboratory Catalogue from page 676,
1226, 1335 onwards
Eppendorf Tubes ® 5ml
Nalgene Oak-Ridge centrifuge tubes
Type 3118, PC
The Missing Link
- Ergonomic operation: Simple, practical and ergonomic single-hand operation.
- Large labelling area.
- Lid design: Hinged lid for minimised sample evaporation during storage and
incubation in a wide range of temperatures from -86°C to 80°C
- Material: Exceptionally high-quality, transparent polypropylene, free of
plasticizers, biocides or mold release agents, for reliable test results
- Certified purity: Available in lot-tested and certified Eppendorf Quality, PCR
clean, Sterile and Eppendorf Biopur ® purity levels
- Centrifugation safety: Maximum safety and stability for centrifugation up to
25,000 × g
- Conical shape: Compatible with accessories for conical 15 ml tubes - many
existing adapters and racks can be used.
- Sample recovery: Available in Eppendorf LoBind ® material for maximum
recovery of valuable samples
From 80°C on, please use the Tube Clip opener Cat. No. 9.409 294
Description
Package
contents
2 bags of 100
Eppendorf Quality
Biopur ® bag of 50, single packed
PCR clean
2 bags of 100
PK Cat. No. Price Now
200
200
50
LT9409277
LT9409278
LT9409288
EUR
35,10
39,30
43,30
-17%
EUR
29,13
32,62
35,94
Transparent. PC with PP screw cap. Can be used in suitable refrigerated or
ambient centrifuges at up to 50,000xg rcf. Autoclavable. Accessory sealing cap
assemblies are available for 10ml, 30ml and 50ml sizes.
Type Capacity Diam. Height PK Cat. No. Price Now
3118
3118
3118
3118
ml mm mm EUR EUR
10
16.1 81.7
1 LT9315691 7,60
5,32
30
25.7 94.5
1 LT9315693 8,20
5,74
50*
28.8 107.0
1 LT9315694 9,90
6,93
85**
38.2 105.7
1 LT9315695 11,30
7,91
* Capacity: 43ml to the brim.
**Capacity: 81ml to the brim.
-30%
Tube Rack for 5ml microcentrifuge tubes,
PP
Nalgene Oak-Ridge centrifuge tubes
Type 3119, PP-copolymer
Designed specifically for 40 x 5ml microcentrifuge tubes this rack will also
accommodate other tubes with a diameter of 13 to 16mm. Made of durable
and corrosion resistant white polypropylene. End plates have handles for easy
transport and stacking
Steam autoclavable at 121°C
Dimensions (L x W x H): 260 x 113 x 105mm
Rows: 4 x 10
-30%
No. of For tubes
PK Cat. No. Price Now
tubes diam.
mm EUR EUR
40 13 - 16mm 1 LT9194026 38,00 26,60
PP-copolymer with PP screw cap. PPCO is more resistant to chemicals than PC.
Autoclavable. When wet, the translucent test-tube enables observation of the
contents. Can be used in refrigerated and unrefrigerated centrifuges at up to
50,000xg rcf. Accessory sealing cap assemblies are available for all sizes.
Type Volume Diam. Height PK Cat. No. Price Now
3119
3119
3119
ml mm mm EUR EUR
10
16.0 81.4
1 LT9315711 6,10
4,27
30
25.5 94.3
1 LT9315713 7,00
4,90
50*
28.8 106.7
1 LT9315714 8,70
6,09
* Capacity: 42ml to the brim.
-30%
10

Life Science - Liquid Handling
For more articles see our Laboratory Catalogue from page 718,
962, 1326 onwards
Filter units Nalgene Rapid-Flow, SFCA
Membrane, sterile
Single-use, disposable filter units for sterile
filtration of media and other reagents, and for
other highly sensitive cell culture lines. With
polystyrene (PS) upper and lower chambers and
surfactant-free, cellulose acetate membranes.
Colour code: yellow collar. For cell culture.
Gamma-irradiated sterile. Low protein binding,
with high throughput rate for proteinaceous
solutions and minimal extractable content. Lot
number, catalogue number, membrane type,
pore size and expiration date are printed on
filter units, bottle tops and receivers for easy
identification and lot traceability.
Type
155
155
157
157
156
156
158
158
162
162
161
161
Special price!
-30%
Volume
Pore Membrane
PK Cat. No. Price Now
upper/lower part size diam.
ml µm mm EUR EUR
150/150
0.20
50
1 LT9046034 11,40
7,98
150/150
0.45
50
1 LT9046035 11,40
7,98
250/250
0.20
50
1 LT9046037 12,20
8,54
250/250
0.45
50
1 LT9046038 12,20
8,54
500/500
0.20
75
1 LT9046041 19,60
13,72
500/500
0.45
75
1 LT9046042 19,60
13,72
500/1000
0.20
75
1 LT9046044 24,90
17,43
500/1000
0.45
75
1 LT9046045 24,90
17,43
500/500
0.20
90
1 LT9045975 23,30
16,31
500/500
0.45
90
1 LT9045976 23,30
16,31
1000/1000 0.20
90
1 LT9045971 29,30
20,51
1000/1000 0.45
90
1 LT9045972 29,30
20,51
LLG-Bottletop dispenser uniTOPDISPENS
Precise
Reliable
10 and 50ml
Made in Germany
®
L A B W A R E
Filter units Nalgene Rapid-Flow, PES
Membrane, sterile
Ideal for biological and pharmaceutical sterile
filtration. PES membrane features low protein
binding, low level of extractables and a high flow
rate. Now available in three pore sizes: The best
filter units with 0.20µm and 0.45µm pore size and
new to the protection of valuable cell cultures from
mycoplasma with 0.10µm pore size. Filter top and
filtrate bottle are graduated. Blue colour-coded
collar with cellulosic vent plug side arm and quickdisconnect
tubing adapter. Leak-proof, sterile screw
closure included for storage of sterile filtrate.
Sterile, single packed. Certificate of Quality
included in each full case. Lot number, catalogue
number, membrane type, pore size and expiration
date are printed on filter units, bottle tops and
receivers for easy identification and lot traceability.
The LLG-uniTOPDISPENS is a reasonably priced bottle-top dispenser with
PTFE-coated glass piston available in 2 volumes: 10ml and 50ml.
Precise, reliable and robust. The PTFE-coating of the glass piston is ideal when
dispensing of crystallizing media. The high quality of the material used and the
precision of the grinding ensures the perfect seal of the complete dispensing
system.
Type
565
568
566
565
568
566
569
567
165
168
166
169
167
Special price!
-30%
Volume
Pore Membrane
PK Cat. No. Price Now
upper/lower part size diam.
ml µm mm EUR EUR
150/150
0.10
50
1 LT9046022 10,50
7,35
250/250
0.10
50
1 LT9046024 11,80
8,26
500/500
0.10
75
1 LT9046023 18,10
12,67
150/150
0.20
50
1 LT6302336 10,80
7,56
250/250
0.20
50
1 LT6228218 11,60
8,12
500/500
0.20
75
1 LT6227381 18,60
13,02
500/500
0.20
90
1 LT6225298 22,00
15,40
1000/1000 0.20
90
1 LT6229041 23,70
16,59
150/150
0.45
50
1 LT7047785 11,50
8,05
250/250
0.45
50
1 LT7047791 12,20
8,54
500/500
0.45
75
1 LT7047787 19,70
13,79
500/500
0.45
90
1 LT7047793 23,30
16,31
1000/1000 0.45
90
1 LT7047789 22,60
15,82
- Precise and reliable volume setting
- Visible dosing procedure
- Valve block made of PP gives optimised protection of the glass made
dosing cylinder
- Precise grinding of the glass piston into the glass cylinder forms a
perfect seal
- Ergonomic finger guard
- Delivered with 2 PP-adapters GL 40 and 45
- With glass piston and clear glass cylinder
-26%
Volume Graduations Accuracy Precision PK Cat. No. Price Now
max. vol. max. vol.
ml ml (≤ ± R%) (≤ CV%) EUR EUR
2 - 10
10 - 50
0.5
1.0
0.6
0.6
0.2
0.2
1
1
LT9283806
LT9283808
99,90
109,00
73,93
85,02
11

Volumetrics
For more articles see our Laboratory Catalogue from page 872,
887, 891, 897 onwards
Graduated pipettes, soda glass, class AS,
type 3
Measuring cylinders, PP, tall form, class B
Special price!
Soda glass. Conformity-certified. With batch date identification. DIN EN ISO
835, DIN 12697 and BS700 - 1583. Calibrated to deliver (EX). Ring marks and
graduations in permanent blue enamel.
-30%
Volume Graduations Tolerance Length PK Cat. No. Price Now
ml ml ± ml mm EUR EUR
1
2
5
10
20
25
50
0.01
0.02
0.05
0.1
0.1
0.1
0.1
0.007
0.010
0.030
0.050
0.100
0.100
0.200
360
360
360
360
450
450
720
1
1
1
1
1
1
1
LT9272250
LT9272251
LT9272252
LT9272253
LT9272254
LT9272255
LT9272256
3,76
4,07
4,27
3,63
7,07
6,03
27,12
2,63
2,85
2,99
2,54
4,95
4,22
18,98
Volumetric pipettes, soda glass, class AS,
1 mark
Soda glass. Conformity-certified.
With batch date identification.
DIN EN ISO 648, DIN 12691 and
BS 700 - 1583.
Calibrated to deliver (EX).
Ring mark and inscriptions in
permanent blue enamel.
-30%
Volume Tolerance Length PK Cat. No. Price Now
ml ± ml mm EUR EUR
1
2
3
4
5
10
15
20
25
50
0.007
0.010
0.010
0.015
0.015
0.020
0.030
0.030
0.030
0.050
310
330
360
360
400
440
455
510
520
540
1
1
1
1
1
1
1
1
1
1
LT9272260
LT9272261
LT9272262
LT9272263
LT9272264
LT9272265
LT9272267
LT9272268
LT9272269
LT9272270
4,91
4,95
4,20
4,09
4,35
4,33
9,59
8,68
9,39
13,00
3,43
3,46
2,94
2,87
3,04
3,03
6,71
6,08
6,57
9,10
Safety pipette bulb, rubber
Blue moulded graduations
Highly transparent. With easily readable, raised, embossed blue scale and ring
marks at the primary scale points.
Calibrated 'In'. Class B tolerances according to DIN 12681/ISO 6706.
Hexagonal base with bottom studs provides high stability. Thermal stress up to
80ºC does not cause tolerance limits to be permanently exceeded. To preserve
markings, do not clean at temperatures exceeding 60ºC.
Food-safe (suitable for contact with foodstuff in accordance with Regulation
(EC) No. 10/2011).
-30%
Capacity Grad. Height Tolerance Diam. PK Cat. No. Price Now
ml ml mm ± ml mm EUR EUR
10
25
50
100
250
500
1000
2000
0.20
0.50
1.00
1.00
2.00
5.00
10.00
20.00
145
170
200
250
315
360
440
482
0.2
0.5
1.0
1.0
2.0
5.0
10.0
20.0
15
22
27
33
44
58
69
97
1
1
1
1
1
1
1
1
LT9274408
LT9274409
LT9274410
LT9274411
LT9274412
LT9274413
LT9274414
LT9274415
3,95
4,80
5,50
7,30
11,30
14,80
20,20
36,40
2,77
3,36
3,85
5,11
7,91
10,36
14,14
25,48
Moulded graduations
Tall form. Highly transparent. With a raised scale and ring marks at the
primary scale points, calibrated 'In'.
Class B tolerances according to DIN 12681/ISO 6706.
Hexagonal base with bottom studs provides high stability. Thermal stress up to
80ºC does not cause tolerance limits to be permanently exceeded. Food-safe
(suitable for contact with foodstuff in accordance with Regulation EC No.
10/2011).
-30%
Capacity Grad. Height Tolerance Diam. PK Cat. No. Price Now
ml ml mm ± ml mm EUR EUR
10
25
50
100
250
500
1000
2000
0.20
0.50
1.00
1.00
2.00
5.00
10.00
20.00
145
170
200
250
315
360
440
482
0.2
0.5
1.0
1.0
2.0
5.0
10.0
20.0
15
22
27
33
44
58
69
97
1
1
1
1
1
1
1
1
LT7075031
LT9274420
LT9274428
LT9274438
LT9274448
LT9274454
LT9274462
LT9274464
2,35
2,95
3,25
4,10
6,70
8,90
12,20
23,60
1,65
2,07
2,28
2,87
4,69
6,23
8,54
16,52
Chemically resistant rubber. With valves
for suction, emptying and air release,
controlled by thumb and finger pressure.
Pipette aid
Rubber. For quick and easy pipetting.
Type Figure PK Cat. No. Price Now
Standard, for pipettes up to 8mm diameter
Universal, for most pipettes
1
2
-30%
1
1
LT9273836
LT9273837
EUR
8,05
8,75
EUR
5,64
6,13
-30%
Capacity Colour PK Cat. No. Price Now
ml EUR EUR
2 Grey 1 LT9115502 2,10 1,47
12

Sampling
For more articles see our Laboratory Catalogue from page 113,
516, 519 onwards
Disposable spoons, scoops, spatulas
LaboPlast Bio/SteriPlast Bio,
Green PE, white
LLG-Sample containers, PS, PP
1 2
The LaboPlast Bio and SteriPlast Bio are made of Green PE and are clean-room
produced and individually packed (packaging also made of Bio-PE) for one-way
needs. The LaboPlast Bio products are entirely made of renewable resources.
Not only with regard to quality but also with regard to its characteristics for
high-quality sampling, it is perfectly comparable with conventional
polyethylene. They are ideal for sampling of powder, granules and pastes.
Additionally the SteriPlast Bio scoops are gamma radiation sterilized.
- Product and packaging entirely made of renewable resources
- Individually packed
- Production and packaging acc. to clean-room class 7 (10,000)
- According to EU food and FDA guideline
Disposable spoons
Type Length Capacity Description PK Cat. No. Price Now
LaboPlast
LaboPlast
SteriPlast
SteriPlast
-15%
mm ml EUR EUR
127 2.5 non-sterile
100 LT6265059 34,10
28,99
170 10 non-sterile
100 LT6265060 36,40
30,94
127 2.5 sterile
100 LT6265053 37,15
31,58
170 10 sterile
100 LT6265054 39,60
33,66
Disposable scoops
Manufactured from virgin polystyrene and polypropylene.
All materials are non-cytotoxic.
With plain label
Capacity Material
Material
PK Cat. No. Price Now
container
Lid
ml EUR EUR
7
30
60
PS
PS
PS
PP
PP
PE
700
50
60
LT6265646
LT6265647
LT6265648
108,20
12,30
19,50
75,74
8,61
13,65
With graduations
20
40
60
90
120
250
500
1000
PP
PP
PP
PP
PP
PP
PP
PP
HDPE
HDPE
HDPE
HDPE
HDPE
HDPE
HDPE
HDPE
1000
500
500
300
300
154
132
64
LT6265649
LT6265650
LT6265651
LT6265652
LT6265653
LT6265654
LT6265655
LT6265656
-30%
-30%
110,60
79,30
86,30
60,90
67,90
96,90
107,70
82,10
LLG - Sample Dippers with screw cap and
handle, sterile, PS
®
®
L A B W A R E
1
2
77,42
55,51
60,41
42,63
47,53
67,83
75,39
57,47
L A B W A R E
-15%
Type Capacity Length Description PK Cat. No. Price Now
Handle can be removed easily by breaking
after having taken the sample.
Blue containers with PP lid (30 ml) or metal
lid with liner (100 ml, 250 ml).
LaboPlast
LaboPlast
LaboPlast
LaboPlast
SteriPlast
SteriPlast
SteriPlast
SteriPlast
ml mm EUR EUR
25 141 non-sterile
10 LT6265055 15,10
12,84
50 160 non-sterile
10 LT6265056 15,60
13,26
100 205 non-sterile
10 LT6265057 16,10
13,69
150 216 non-sterile
10 LT6265058 16,50
14,03
25 141 sterile
10 LT6265049 16,40
13,94
50 160 sterile
10 LT6265050 16,95
14,41
100 205 sterile
10 LT6265051 17,50
14,88
150 216 sterile
10 LT6265052 17,90
15,22
~ ~
Disposable spatulas
-15%
Type Length Imm. Description PK Cat. No. Price Now
depth
mm mm EUR EUR
LaboPlast
SteriPlast
263
263
150
150
non-sterile
sterile
10
10
LT6265062
LT6265061
13,60
14,80
11,56
12,58
-30%
Capacity Length Material Material
PK Cat. No. Price Now
Handle container Lid
ml mm EUR EUR
30
100
250
200
385
330
PS
PS
PS
PP
metal
metal
50
50
50
LT6265643
LT6265644
LT6265645
71,00
87,40
107,90
49,70
61,18
75,53
13

Lab helpers
For more articles see our Laboratory Catalogue from page 58,
124, 1134, 1406 onwards
LLG- Forceps assortment, 4-parts,
chromium-nickel steel
LLG-Lab Notebook
®
®
L A B W A R E
L A B W A R E
LLG- Forceps assortment, 4-parts, chromium-nickel steel (1.4301) in synthetic
leather bag including:
1 Sharp forceps, curved, 115mm
1 Thumb forceps, 115mm
1 Forceps with guide pin straight, 130mm
1 Coverglas forceps, 115mm
1 Synthetic leather bag, 6 compartments 100 x 175mm -30%
Description PK Cat. No. Price Now
EUR
EUR
LLG- Forceps assortment, 4-parts 1 LT9160394 26,10 18,27
Disposable syringes HSW NORM-JECT ® , 2-
part, PP/PE, sterile
For recording research data, experimental procedures, and design ideas. Use
these notebooks to keep your information safe and well organised. Numbered,
acid-free, grid pages include spaces for title, project number, book number,
date, and witness signature. Lined notebooks feature college ruled pages for
easy report writing. Covers are waterproof and chemical-resistant. All
notebooks contain periodic and conversion tables in the back. Admissible as
court evidence when used as prescribed by law. Measures: 216 x 279mm.
-30%
Description Type Colour PK Cat. No. Price Now
- PP barrel, with PE piston
- Smooth flow, tight, high transparency barrel
- No rubber, styrene or DEHP, latex- and silicone-oil-free
- Pyrogen-free, PVC-free, non-toxic
- Sterile, individually blister strip packed
- Defined position of the plunger at volume ”0“ to feel when plunger is
completely inserted
- Extended graduation for wider range of application
- Tested for use in HPLC
- Defined safety stop to avoid accidental pull-out of plunger and loss of
medicine
Special price!
-30%
Capacity PK Cat. No. Price Now
100 pages
200 pages
200 pages
grid
grid
lined
black
blue
red
Brushes, natural bristle
9.019 010
9.019 030
1
1
1
LT9050750
LT9050751
LT9050752
EUR
25,70
38,20
38,20
EUR
17,99
26,74
26,74
ml EUR EUR
1 : 1/100 (Tuberculin)
2 (3)
5 (6)
10 (12)
20 (24)
50 (60)
100
100
100
100
100
30
LT9410000
LT9410002
LT9410005
LT9410010
LT9410020
LT9410050
12,90
6,75
9,70
15,70
18,00
18,60
9,03
4,73
6,79
10,99
12,60
13,02
9.019 070
Aluminium containers, round
9.019 110
-30%
Type Diam. Length PK Cat. No. Price Now
Capacity
Top Bottom
Fill PK Cat. No. Price Now
diam. diam. height
ml mm mm mm EUR EUR
28
110
110
125
280
64
80
99
96
114
51
56
70
78
58
13
34
25
24
50
100
100
100
100
50
LT9106240
LT9106241
LT9106242
LT9106261
LT9106263
10,40
15,70
15,30
20,30
14,50
7,28
10,99
10,71
14,21
10,15
14
-30%
Pipette brush
Reagent bottle brush with wool tip
Reagent bottle brush with head bundle
Erlenmeyer flask and bottle brush with head bundle
Erlenmeyer flask and bottle brush with head bundle
Beaker brush with wooden handle
Beaker brush with wooden handle
Beaker brush with wooden handle
Beaker brush with extra long wooden handle
Rinsing brush Nylon
mm mm EUR EUR
5 480 1 LT9019010 4,60 3,22
10 190 1 LT9019020 2,60 1,82
10 250 1 LT9019030 4,20 2,94
50 340 1 LT9019050 3,20 2,24
63 470 1 LT9019060 9,00 6,30
85 390 1 LT9019070 14,60 10,22
85 430 1 LT9019080 15,80 11,06
80 430 1 LT9019090 17,20 12,04
80 630 1 LT9019092 21,00 14,70
60 220 1 LT9019110 5,40 3,78

Laboratory bottles
For more articles see our Laboratory Catalogue from page 58,
63, 161, 178 onwards
Double-walled wide-mouth bottles GLS 80 ® ,
DURAN ®
LLG-Wide-mouth bottles, with screw cap,
PE-LD, economy pack
®
L A B W A R E
Special price!
The DURAN ® double walled, wide mouth bottles GLS 80 ® incorporate an
integral jacket that isolates the contents from the external environment.
Heated or cooled liquids can be circulated through the jacket to control the
temperature within the screw topped DURAN ® bottle.
Applications
- Simple, low cost, jacketed chemostat or bioreactor for cell culture.
- Vessel for temperature-controlled reactions such as enzyme digestions.
- Simple continuous flow stirred reactor system with the optional GLS 80 ® cap
components.
- Thermostatic vessel to maintain fluids, or high viscosity liquids at a constant
temperature
- Large cold trap or condenser when used with dry ice in the inner container.
Specifications
- Manufactured from DURAN ® borosilicate 3.3 glass.
- Wide usable temperature range of -40 to +120°C.
- Available in two convenient sizes: 500 and 1000ml.
- All components are fully autoclavable.
- Compatible with magnetic stir bars and the full range of wide mouth GLS 80 ®
connection cap systems for liquid addition or removal during processing.
-18%
Capacity Diam. Height PK Cat. No. Price Now
ml mm mm EUR EUR
500
110 175
1 LT6266805 301,30 247,07
1000
110 275
1 LT6266806 376,30 308,57
Transparent, with cap. The wide neck opening means that the bottles are easy
to fill and clean, leak-proof.
Ideal for liquids, pastes and granulates.
Capacity Diam. Height Thread
external diam.
-30%
PK Cat. No. Price Now
ml mm mm mm EUR EUR
50
100
250
500
1000
1500
2000
39.0
48.0
64.0
77.0
95.0
108.0
120.0
76.0
93.5
120.0
154.0
205.0
226.0
247.0
32
32
40
50
65
65
65
50
20
10
10
4
4
1
LT9073510
LT9073511
LT9073512
LT9073513
LT9073514
LT9073515
LT9073516
39,70
19,60
13,20
23,00
14,60
19,20
5,60
27,79
13,72
9,24
16,10
10,22
13,44
3,92
Laboratory bottles Borosilicate glass 3.3,
GL 45, with retrace code
Borosilicate glass 3.3. DIN 168 - 1. EN ISO 4796-1.
With graduations and retrace code, pouring ring, PP screw cap and ISO thread.
Certificates are available on request.
-30%
Capacity
Ext. Height PK Cat. No. Price Now
diam.
ml mm mm EUR EUR
100
250
500
1000
2000
5000
10000
56
70
86
101
136
186
234
100
138
176
225
260
330
410
10
10
10
10
10
1
1
LT9072331
LT9072332
LT9072334
LT9072335
LT9072336
LT9072337
LT9072338
37,50
42,30
52,20
78,60
187,00
79,50
149,20
26,25
29,61
36,54
55,02
130,90
55,65
104,44
15

LABORTOPS
Cell density meter DSM
For measurement of E. Coli, yeast cells and other biological agents in suspension at 600nm wavelength
- Determination of McFarland units,% transmission (% T) and absorption (Abs)
- Portable, light-weight and battery-powered instruments
- Easy-to-use and easy-to-clean touch panel
- Small, space saving footprints
- Intervalometer-mode for time-lapse recording
The single cuvette model DSM-Cuvette accepts 10mm path length semi-micro and
macro cuvettes or 14 to 17 mm round tubes.
The DSM-Micro model can work with volumes down to 20 micro litres saving reagents and
allowing a high number of experiments e.g. when working with small volume samples.
The multiple channel model DSM-Dual combines the features of DSM-Cuvette and DSM-Micro
and therefore allows multiple samples to be tested at once increasing sample through-put and
reducing labour overhead.
All models are equipped with a drain channel under the sample site.
Further Features:
- One button operation, extremely easy workflow to allow quick testing
- USB 2.0 port for data collection, support automated data collection
- Direct results Viewing on instrument’s screen
- Easy cleaning with an integrated drain in the test sites
- Durable plastic construction
- LED light source for no maintenance and extended instrument life
- Fully built-in controls, no PC or software required
- Sofware for saving data as excel files available (please order separately)
6.266 312
Specifications
Wavelength:
600nm
Bandwidth:
10nm
Reproducibility:
±0.02Å at 1Å
Absorbency Accuracy:
±0.05Å at 1Å
Absorbency Range: -0.3 to 1.99Å
Stray light: