D5 Annex report WP 3: ETIS Database methodology ... - ETIS plus

D5 Annex report WP 3: ETIS Database methodology ... - ETIS plus D5 Annex report WP 3: ETIS Database methodology ... - ETIS plus

16.05.2015 Views

D5 Annex WP 3: DATABASE METHODOLOGY AND DATABASE USER MANUAL – FREIGHT TRANSPORT DEMAND Indicator Compilation Template No. 13 Ref. 2.3.2 Definition ETIS Glossary Computation Method (Formula) Estimated/measured rail transport emissions + corresponding unit cost Emissions of rail transport within a link or area COMMUTE model for passenger transport The emissions are calculated from energy consumption according to MEET tables. (COMMUTE software report p. 19­20 ) Energy consumption equation is shown in Indicator Compilation Table 2.3.1 E= emission factor * Energy Consumption The sulphur dioxide emissions from diesel combustion are heavily dependent on the sulphur content of the fuel. The fuel specific sulphur emission (FSSO2) may be derived from the following expression: FSSO2 = 20 x %S where %S is the mass weight percent of sulphur in fuel. The value in the above table indicates a range of fuel sulphur content from 0.05 to 0.5%. RECORDIT model for freight transport Variable definition Variable computation method Method variable V1 FSSO2= sulphur emissions Directly from a database or agreed classifications/nomenclatures Output of the model 126 Document2 27 may 2004

D5 Annex WP 3: DATABASE METHODOLOGY AND DATABASE USER MANUAL – FREIGHT TRANSPORT DEMAND Method variable V2 %S = the mass weight percent of sulphur in fuel Method variable V3 Electrical power generation – European average/Country specific Updated tables from MEET/COMMUTE Method variable V4 Diesel railway emissions ­ Updated MEET/COMMUTE database Method variable V5 Degree of electrification Updated MEET/COMMUTE database Method variable V6 Emission factors MEET/COMMUTE Method variable V7 Consumption factors MEET/COMMUTE Document2 27 May 2004 127

<strong>D5</strong> <strong>Annex</strong> <strong>WP</strong> 3: DATABASE METHODOLOGY AND DATABASE USER<br />

MANUAL – FREIGHT TRANSPORT DEMAND<br />

Method variable V2<br />

%S = the mass weight percent of<br />

sulphur in fuel<br />

Method variable V3 Electrical power generation –<br />

European average/Country specific<br />

Updated tables from MEET/COMMUTE<br />

Method variable V4 Diesel railway emissions ­ Updated MEET/COMMUTE database<br />

Method variable V5 Degree of electrification Updated MEET/COMMUTE database<br />

Method variable V6 Emission factors MEET/COMMUTE<br />

Method variable V7 Consumption factors MEET/COMMUTE<br />

Document2<br />

27 May 2004<br />

127

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!