Endopore Implants with external hex - Optident

ENDOPORE ®
External hex
Overdenture Restorations
Locator System Impl. Ø mm Collar Item No.
32
The Locator abutment is an attachment with
a self-aligning feature. This feature will aid
patients in seating their denture and eliminate
additional wear from improper seating.
With the Locator’s minimal vertical height, it
is ideal where interocclusal space is limited.
This abutment can also accommodate up to
40° between implants.
Note
Please refer to pages 9 and 18 for Locator
System and its components.
3.5 mm 1 mm 8851
3.5 mm 2 mm 8852
3.5 mm 3 mm 8853
3.5 mm 4 mm 8854
4.1 mm 0.73 mm 8681
4.1 mm 2 mm 8682
4.1 mm 3 mm 8683
4.1 mm 4 mm 8684
5.0 mm 1.35 mm 8691
5.0 mm 2 mm 8691
5.0 mm 3 mm 8691
5.0 mm 4 mm 8691
O-Ring Abutment System (ORS) Impl. Ø mm Collar Length Item No.
O-Ring Abutment System
The O-Ring abutment system can accommodate
up to 5 degrees of divergence between
implants.
Each O-Ring System includes a titanium male
abutment and an ORS lab kit which includes
a brass abutment analog, metal housing,
3 red O-Rings and 3 white O-Rings.
Length
Note
The red O-Ring is used for laboratory set-up
and the white O-Ring is used for the finished
overdenture.
O-Ring Accessories
O-Ring Lab Kit
Metal Housing
White O-Rings
Package of 10
Collar
Ø 3.5 1 mm 4 mm 04M-1ORS
Ø 3.5 2 mm 5 mm 04M-2ORS
Ø 3.5 3 mm 6 mm 04M-3ORS
Ø 3.5 4 mm 7 mm 04M-4ORS
Ø 3.5 5 mm 8 mm 04M-5ORS
Ø 4.1 1 mm 4 mm 04B-1ORS
Ø 4.1 2 mm 5 mm 04B-2ORS
Ø 4.1 3 mm 6 mm 04B-3ORS
Ø 4.1 4 mm 7 mm 04B-4ORS
Ø 4.1 5 mm 8 mm 04B-5ORS
Ø 4.1 6 mm 9 mm 04B-6ORS
Ø 4.1 7 mm 10 mm 04B-7ORS
Ø 5.0 1 mm 4 mm 04WB-1ORS
Ø 5.0 2 mm 5 mm 04WB-2ORS
Ø 5.0 3 mm 6 mm 04WB-3ORS
Ø 5.0 4 mm 7 mm 04WB-4ORS
Ø 5.0 5 mm 8 mm 04WB-5ORS
Ø 5.0 6 mm 9 mm 04WB-6ORS
Item No.
06-ORS
07-0044
06-O/ORS