Endopore Implants with external hex - Optident

More documents

Recommendations

Info

ENDOPORE ® External hex Hexed Abutments Impl. Ø mm Length Angle Item No. Angled Hexed Abutments Retaining screw included Angled abutments compensate for large divergences in implant alignment. Angled guide pins are available in the Prosthetic Instrumentation section of this catalog, pages 36 – 37. Ø 3.5 11 mm 15˚ 05M-15FA Ø 3.5 11 mm 25˚ 05M-25FA Ø 4.1 11 mm 15˚ 05B-15FA Ø 4.1 11 mm 25˚ 05B-25FA Ø 5.0 11 mm 15˚ 05WB-15FA Ø 5.0 11 mm 25˚ 05WB-25FA 15° 25° Temporary Titanium Abutments Impl. Ø mm Item No. 30 Temporary Abutments Retaining screw included Hexed Temporary Abutment Ø 3.5 Ø 4.1 Ø 5.0 05M-TEMP/H 05B-TEMP/H 05WB-TEMP/H Non-Hexed Temporary Abutment Ø 3.5 Ø 4.1 Ø 5.0 05M-TEMP 05B-TEMP 05WB-TEMP
External hex Crown and Bridge Restorations UCLA Abutments UCLA abutments provide a foundation to which wax can be added to shape a screw-retained crown or bridge or a custom abutment. See the Prosthetic Instrumentation section for the lapping tool used to polish the cast surface that will mate with the implant. A reamer is also available to clean out the retaining screw hole in the casting. Gold base abutments have ma- BICORTICAL ENDOPORE® ® chined surfaces and will not require finishing with these tools. Hexed UCLA abutments should be used for custom abutments and for supporting crowns as they will resist the rotational forces associated with single tooth screw retained restorations. Non-hexed UCLA abutments should be used for supporting screw retained bridges. 31 UCLA Abutments Impl. Ø mm Item No. UCLA Plastic Abutments Retaining screw included Hexed, green Hexed, yellow Hexed, blue Non-Hexed, white Non-Hexed, white Non-Hexed, yellow Ø 3.5 Ø 4.1 Ø 5.0 Ø 3.5 Ø 4.1 Ø 5.0 06M-UCLA/H 06B-UCLA/H 06WB-UCLA/H 06M-UCLA 06B-UCLA 06WB-UCLA Hexed Non-Hexed UCLA Gold Base Abutments, metal alloy for porcelain fusing Retaining screw included Important The melting range is 1232 – 1260˚C (2250 – 2300˚F), refer to package instructions for further details. Hexed Ø 3.5 Ø 4.1 Ø 5.0 06M-UCLA/H/G 06B-UCLA/H/G 06WB-UCLA/H/G Non-Hexed Ø 3.5 Ø 4.1 Ø 5.0 06M-UCLA/G 06B-UCLA/G 06WB-UCLA/G Hexed Non-Hexed UCLA Gold Base Abutments, alloy not for porcelain fusing Retaining screw included Hexed Gold Base UCLA Abutment Important The melting range is 1400 – 1490˚C (2550 – 2710˚F), refer to package instructions for further details. Ø 3.5 Ø 4.1 Ø 5.0 06M-UCLA/H/GNC 06B-UCLA/H/GNC 06WB-UCLA/H/GNC Non-Hexed Gold Base UCLA Abutment Ø 3.5 Ø 4.1 Ø 5.0 06M-UCLA/GNC 06B-UCLA/GNC 06WB-UCLA/GNC Hexed Non-Hexed
Page 1 and 2: Osteotome PROCEDURES peRfect NTERNA
Page 3 and 4: Table of Contents ENDOPORE ® Conte
Page 5 and 6: Internal connection BICORTICAL ENDO
Page 11 and 12: Internal hex BICORTICAL ENDOPORE®
Page 19 and 20: Internal hex BICORTICAL ® ENDOPORE
Page 21 and 22: External hex BICORTICAL ENDOPORE®
Page 29: External hex BICORTICAL ENDOPORE®
Page 35 and 36: External hex BICORTICAL ® UMA Anal
Page 37 and 38: Prosthetics BICORTICAL ENDOPORE®
Page 39 and 40: Surgery BICORTICAL ENDOPORE® ® 39
Page 41 and 42: Surgery BICORTICAL ENDOPORE® ® 41
Page 44: ENDOPORE ® Implant Internal Connec

Endopore Implants with external hex - Optident

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?