Endopore Implants with external hex - Optident
Endopore Implants with external hex - Optident
Endopore Implants with external hex - Optident
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Internal <strong>hex</strong><br />
BICORTICAL ENDOPORE® ®<br />
17<br />
UCLA Abutments<br />
UCLA abutments provide a foundation to<br />
which wax can be added to shape a screwretained<br />
crown or bridge or a custom abutment.<br />
See the Prosthetic Instrumentation<br />
section for the lapping tool used to polish the<br />
cast surface that will mate <strong>with</strong> the implant.<br />
A reamer is also available to clean out the<br />
retaining screw hole in the casting. Gold base<br />
abutments have machined surfaces and will<br />
not require finishing <strong>with</strong> these tools.<br />
Hexed UCLA abutments should be used for<br />
custom abutments and for supporting crowns<br />
as they will resist the rotational forces associated<br />
<strong>with</strong> single tooth screw retained restorations.<br />
UCLA Abutments Impl. Ø mm Item No.<br />
UCLA Plastic Abutments<br />
Retaining screw included<br />
Hexed<br />
Non-Hexed<br />
UCLA Gold Base Abutments<br />
Non-Ceramic Alloy<br />
Retaining screw included<br />
Hexed<br />
Non-Hexed<br />
4.1 mm 06I-UCLA/H<br />
5.0 mm 06WI-UCLA/H<br />
4.1 mm 06I-UCLA<br />
5.0 mm 06WI-UCLA<br />
4.1 mm 06I-UCLA/H/GNC<br />
5.0 mm 06WI-UCLA/H/GNC<br />
4.1 mm 06I-UCLA/GNC<br />
5.0 mm 06WI-UCLA/GNC<br />
Important<br />
The melting range is 1,400 – 1,490˚C (2,550<br />
– 2,710˚F), refer to package instructions for<br />
further details.<br />
UCLA Plastic<br />
Abutment<br />
Hexed<br />
UCLA Plastic<br />
Abutment<br />
Non-Hexed<br />
UCLA Gold Base<br />
Abutment<br />
Hexed<br />
UCLA Gold Base<br />
Abutment<br />
Non-Hexed
Change language