Endopore Implants with external hex - Optident

Osteotome PROCEDURES 

peRfect 

NTERNAL 

PERFECT SURFACE 

ENDOPORE ® 

Product Catalog 

INTERNAL HEX 

PerfeCT SURFACE 

EXTERNAL HEX 

Implant Placement Procedure

ENDOPORE ®

Table of Contents 

ENDOPORE ® 

Contents 

Endopore Implants 

with internal connection 

4 Endopore Implants with internal 

connection for one-stage surgery 

5 Case Planning Chart 

Crown and Bridge Restorations 

7 Cover Screws 

7 Cementable Abutments 

7 ECO Abutment System 

8 Octabutment System 

Overdenture Restorations 

9 Locator System 

10 Dalla Bona Abutment System 

10 O-Ring Abutment System 


with internal Hex 

11 Endopore Implants for one-stage 

and two-stage surgery 




14 Healing Abutments 

15 Transfer Copings 

15 Implant Analogs 

15 Retaining Screws 

16 Hexed Abutments 

16 Angled Abutments 

17 UCLA Abutments 





20 UMA System 


with external Hex 

21 Endopore External Hex Connection 

implants for one-stage and two-stage 

surgery 




26 Healing Abutments 

27 Transfer Copings 

28 Implant Analogs 

28 Retaining Screws 

29 Hexed Abutments 

30 Angled Abutments 

30 Temporary Titanium Abutments 

31 UCLA Abutments 





34 UMA System 

36 Prosthetic Instrumentation 

Surgery 

38 Endopore Surgical Kits 

39 Endopore Surgical Instrumentation 

42 Articles in alphabetical order 

 

Internet 

All print material released by Sybron Implant Solutions is available online, too. Product catalogs 

and insertion brochures as well as information for patients or current case reports – it takes 

you only 4 steps to get to the print product desired. Just click under www.sybronimplants.de

ENDOPORE ® 

Internal connection 


with internal connection 

for one-stage surgery 

 

The Endopore implants have a standard 

Morse Taper implant-to-abutment interface 

and are supplied in both 4.1 mm and 5.0 mm 

implant diameters, each having a 4.8 mm 

abutment platform diameter. This allows both 

the 4.1 mm and 5.0 mm diameter implants to 

accept the same prosthetic components. Each 

implant diameter is available with a 1.8 mm 

transgingival collar. A 1 mm low profile cover 

screw is packaged with each implant. 

AP* TC* Length Item No. 

4.8 mm AP* 

Implant Ø 4.1 mm 

1.8 mm TC* 

Length 

4.8 mm 1.8 mm 7 mm 01S-7I1.8 

4.8 mm 1.8 mm 9 mm 01S-9I1.8 

4.8 mm 1.8 mm 12 mm 01S-12I1.8 


4.8 mm 1.8 mm 5 mm 01WS-5I1.8 

* AP – Abutment Platform Ø 

** TC – Transgingival Collar 

Diameter 

4.8 mm 1.8 mm 7 mm 01WS-7I1.8 

4.8 mm 1.8 mm 9 mm 01WS-9I1.8 

4.8 mm 1.8 mm 12 mm 01WS-12I1.8


BICORTICAL ENDOPORE® ® 

Case Planning Chart 

One-stage 

Surgery 

Angled 

Cementable 

Straight 

Cementable 

ECO Abutment 

Octabutment 

 

Crown 

Bridge 

Locking 

Non-Locking 

Crown 

Bridge 

Bar

ENDOPORE ® 



 

One-stage 

Surgery 

Locator 

System 

O-Ring 

System 

Dalla Bona 

System 

Impression 

Stage 

Laboratory 

Processing 

Final 

Restoration 

Overdenture




Cover Screws Length Item No. 

Cover Screw (replacement) 

A 1 mm cover screw is packaged with each 

implant. 

1 mm 02S-1HS 

2 mm 02S-2HS 

3 mm 02S-3HS 

4 mm 02S-4HS 

Cementable Abutments Length Item No. 

Straight Cementable Abutments 

4.0 mm 05S-4.0FS 

5.5 mm 05S-5.5FS 

7.0 mm 05S-7.0FS 

 

Angled Cementable Abutments 

Angle 15° 

Angle 25° 

05S-15FA 

05S-25FA 

15° 

ECO Abutment System 

ECO Abutment and Cap 

for cementable restorations 

Length 5.0 mm (7.0 mm with cap) 

ECO Analog 

Item No. 

05S-5ABUT/WC 

06S-ANALOG 

7.0 mm 

5.0 mm 

ECO Abutment 

ECO Analog 

ECO Coping – Indexed 

ECO Coping – Non Indexed 

06S-COPING/I 

06S-COPING 

ECO Coping 

– Indexed 

ECO Coping 

– Non Indexed

ENDOPORE ® 


Octabutment System 

Item No. 

The Octabutment System is used for all procedures where a removable prosthesis 

is required, or where a working model incorporating an abutment analog 

is desired. 

Octabutment 

Octabutment Cap with Screw 

07S-0010 

07S-2100 

Octabutment 

Cap with screw 

Transfer Coping 

with Guide Pin for Octabutment 

Octabutment Analog 

07S-0090 

07S-0015 


Octabutment Analog 

 

Temporary Abutment for Octabutment 

locking 

Temporary Abutment for Octabutment 

non-locking 

Temporary abutments include an octabutment 

retaining screw. 

07S-0303 

07S-0353 

locking 

non-locking 

Plastic Coping for Octabutment 

locking 

07S-0203 

Plastic Coping for Octabutment 

non-locking 

07S-0253 

locking 

non-locking 

Note: Plastic copings include an octabutment 

retaining screw. 

Octabutment Retaining Screw 

07S-0053 

Accessories 

Item No. 

Insertion Tip 

for the ECO and Cementable Abutment 

07S-0176 

Insertion Tip for Octabutment 

07S-0175 

Driver Housing 

Driver Tip 

0.05“ Hex Tip 

07-0190 

06-TWHT 

Insertion Tip 

Insertion Tip for 

Octabutment 



Hex Tip 

12.5 mm




Locator Abutments Impl. Ø mm Collar Item No. 

The Locator abutment is an attachment with 

a self-aligning feature. This feature will aid 

patients in seating their denture and eliminate 

additional wear from improper seating. 

With the Locator’s minimal vertical height, it 

is ideal where interocclusal space is limited. 

This abutment can also accommodate up to 

40° between implants. 

4.1/ 5.0 mm 0.73 mm 8950 

4.1/ 5.0 mm 2 mm 8951 

4.1/ 5.0 mm 3 mm 8952 

4.1/ 5.0 mm 4 mm 8953 

4.8 mm 

Abutment Platform 

Locator Attachments 

Item No. 


Item No. 

 

Locator Male Processing Package 

2 Sets, each Set includes: 1 Processing Replacement 

Male 8515, 1 Replacement Male 

8524/ 8527/8529, 1 Spacer white 

Locator Replacement Male 

clear, 4 Pack 

Locator Light Retention Replacement Male 

pink, 4 Pack 

8519 

8524 

8527 

Locator Extended Range Replacement Male 

green, 4 Pack 

Locator Extra Light Extended Range Male 

red, 4 Pack 

Locator Black Processing Replacement Male 

4 Pack 

8547 

8548 

8515 

Locator Extra Light Retention Replacement 

Male, blue, 4 Pack 

8529 

Locator Parallel Post 

4 Pack 

8517 

Locator Impression Coping 

4 Pack 

8505 

Locator Female Analog 

5 mm Diameter. 4 Pack 

8516 

Locator 

Parallel Post 

Locator Impression 

Coping 

Female Analog 

Ø 5 mm 

Angle Measurement Guide 

9530 

Angle Measurement 

Guide 

Locator Core Tool 

8393 

Locator Abutment Driver 

15 mm length 

21 mm length 

8926 

8927 

20 Ncm Torque Wrench 

(Ncm – Newton centimeters) 

06-TW20

ENDOPORE ® 



Dalla Bona and O-Ring Abutment Systems 

Item No. 

The ORS and the Dalla Bona abutments lie 

flush with the top of the implant when the 

abutments are inserted into the Endopore 

One-Stage implants. 

Note 

Please refer to pages 32 – 33 

for Dalla Bona Abutment 

System and O-Ring Abutment 

System. 

10 

Dalla Bona Abutment System 

Each Dalla Bona System includes a titanium 

male abutment, a brass abutment analog, a 

titanium female with a PVC ring and a spacer. 

07S-3000 

O-Ring Abutment System 

Each O-Ring System includes a titanium male 

abutment and an ORS lab kit which includes a 

brass abutment analog, metal housing, 

3 red O-Rings and 3 white O-Rings. 

07S-4000 

Note 

The red O-Ring is used for 

laboratory set-up and the 

white O-Ring is used for the 

finished overdenture. 

Accessories 

Item No. 


07-0190 

Abutment Driver for ORS and Dalla Bona 

System 

07-0140 

Dalla Bona Activating Tool 

An instrument used to increase the retention 

of an attachment 

07-1017 

Dalla Bona Deactivating Tool 

An instrument used to reduce the retention of 

an attachment 

07-1018

Internal hex 


11 

Endopore Implants with 

internal hex for one-stage 


Endopore Implants with internal hex are supplied in both 4.1 

mm and 5.0 mm implant platforms. A low profile cover screw is 

packaged with each implant. 

SCR* Length Item No. 

SCR* 

Length 


2 mm 7 mm 01l-7I2 

2 mm 9 mm 01l-9I2 

2 mm 12 mm 01l-12I2 


Diameter 

* SCR – Smooth Coronal Region 

2 mm 7 mm 01Wl-7I2 

2 mm 9 mm 01Wl-9I2 

2 mm 12 mm 01Wl-12I2

ENDOPORE ® 



Flared Healing 

Straight Healing 

12 

One- and twostage 

Surgery 

Abutment 

Abutment 

Flared Transfer 

Straight Transfer 

Impression 

Stage 

Coping Assembly 


Flared Hexed 

Abutment 

Angled Hexed 

Abutment 

Angled Hexed 

Abutment 

Straight Hexed 

Abutment 

Hexed UCLA 

Abutment 

Non-Hexed UCLA 

Abutment 

Laboratory 

Processing 

15° 25° 

Final 

Restoration 

Crown 

Bridge



13 



Surgery 


Abutment 

Impression 

Stage 

Locator 

System 

O-Ring 

System (ORS) 

Dalla Bona 

System 

Laboratory 

Processing 

Final 

Restoration 

Overdenture

ENDOPORE ® 



Cover Screws Impl. Ø mm Item No. 


A low profile cover screw is packaged with 

each implant. 

4.1 mm 02I-CS 

5.0 mm 02WI-CS 

Healing Abutments Impl. Ø mm Length Width Item No. 

14 

Straight Healing Abutments 

The straight healing abutment is used in all 

situations except where an expanded gingival 

cuff is desired. 

4.1 mm 3 mm 4.1 mm 02B-3HS 

4.1 mm 5 mm 4.1 mm 02B-5HS 

4.1 mm 7 mm 4.1 mm 02B-7HS 

5.0 mm 3 mm 5.0 mm 02WB-3HS 

5.0 mm 5 mm 5.0 mm 02WB-5HS 

5.0 mm 7 mm 5.0 mm 02WB-7HS 

Flared Healing Abutments 

The use of a flared healing abutment allows 

the gingiva to heal around this expanded profile, 

where a more natural emergence profile 

is preferred. 

4.1 mm 4 mm 5.5 mm 02B-4H 

4.1 mm 6.5 mm 5.5 mm 02B-6.5H 

5.0 mm 4 mm 6.4 mm 02WB-4H 

5.0 mm 6.5 mm 6.4 mm 02WB-6.5H 

Width 

Width 

Length 

Length 


Abutment 


Abutment



15 

Transfer Copings 

The shape of the transfer coping matches the 

shape of the corresponding healing abutment 

and this allows the profile of the gingival cuff 

to be accurately reproduced 

in the working model. 

Transfer Copings Impl. Ø mm Length Item No. 

Straight Transfer Copings 

for use with straight healing abutments, 

incl. screw 

Flared Transfer Copings 

for use with flared healing abutments 

incl. screw 

Transfer Coping Screw, long 

for optional use with transfer copings, when 

an „open tray” technique is used 

4.1 mm 11 mm 06I-CTCA/S 

5.0 mm 11 mm 06WI-CTCA/S 

4.1 mm 11 mm 06I-CTCA/F 

5.0 mm 11 mm 06WI-CTCA/F 

4.1 mm 16 mm 06B-TC/SL 

5.0 mm 16 mm 06B-TC/SL 


Coping 


Coping 


Screw 

Implant Analogs Impl. Ø mm Length Qty. Item No. 

Implant Analogs 

Material: Stainless Steel 

4.1 mm 9 mm 1 06I-PIA 

5.0 mm 9 mm 1 06WI-PIA 

Retaining Screws (replacement) Impl. Ø mm Item No. 

for use with hexed and UCLA abutments 

Titanium Alloy Replacement Screw 

Gold Alloy Replacement Screw 

4.1/ 5.0 mm 05B-2RS 

4.1/ 5.0 mm 05B-2RS/G 

All abutments are packaged with a titanium 

retaining screw.

ENDOPORE ® 


Hexed Abutments Impl. Ø mm Length Collar Item No. 

These abutments are used for cement retained 

crown or bridge restorations. 

Straight Hexed Abutments 

Retaining screw included 

The straight hexed abutment has a parallel 

sided transgingival collar. 

4.1 mm 7 mm 1.5 mm 05I-7FN 

4.1 mm 9 mm 3.5 mm 05I-9FN 

4.1 mm 11 mm 5.5 mm 05I-11FN 

5.0 mm 7 mm 1.5 mm 05WI-7FN 

5.0 mm 9 mm 3.5 mm 05WI-9FN 

5.0 mm 11 mm 5.5 mm 05WI-11FN 

Length 

Collar 

16 

Flared Hexed Abutments 


The flared hexed abutment is designed for 

restorations requiring a natural emergence 

profile. 

4.1 mm 8.5 mm 2 mm 05I-8.5UN 

5.0 mm 8.5 mm 2 mm 05WI-8.5UN 

Collar 

Length 

Angled Abutments Impl. Ø mm Length Angle Item No. 

Angled Hexed Abutments 


Angled abutments compensate for large divergences 

in implant alignment. Angled guide 

pins are available in the Prosthetic Instrumentation 

section of this catalog. 

4.1 mm 11 mm 15° 05I-15FA 

4.1 mm 11 mm 25° 05I-25FA 

5.0 mm 11 mm 15° 05WI-15FA 

5.0 mm 11 mm 25° 05WI-25FA 

15° 25°



17 

UCLA Abutments 

UCLA abutments provide a foundation to 

which wax can be added to shape a screwretained 

crown or bridge or a custom abutment. 

See the Prosthetic Instrumentation 

section for the lapping tool used to polish the 

cast surface that will mate with the implant. 

A reamer is also available to clean out the 

retaining screw hole in the casting. Gold base 

abutments have machined surfaces and will 

not require finishing with these tools. 

Hexed UCLA abutments should be used for 

custom abutments and for supporting crowns 

as they will resist the rotational forces associated 

with single tooth screw retained restorations. 

UCLA Abutments Impl. Ø mm Item No. 

UCLA Plastic Abutments 


Hexed 

Non-Hexed 

UCLA Gold Base Abutments 

Non-Ceramic Alloy 


Hexed 

Non-Hexed 

4.1 mm 06I-UCLA/H 

5.0 mm 06WI-UCLA/H 

4.1 mm 06I-UCLA 

5.0 mm 06WI-UCLA 

4.1 mm 06I-UCLA/H/GNC 

5.0 mm 06WI-UCLA/H/GNC 

4.1 mm 06I-UCLA/GNC 

5.0 mm 06WI-UCLA/GNC 

Important 

The melting range is 1,400 – 1,490˚C (2,550 

– 2,710˚F), refer to package instructions for 

further details. 

UCLA Plastic 

Abutment 

Hexed 

UCLA Plastic 

Abutment 

Non-Hexed 

UCLA Gold Base 

Abutment 

Hexed 

UCLA Gold Base 

Abutment 

Non-Hexed

ENDOPORE ® 



Locator Abutments Impl. Ø mm Collar Item No. 

18 









4.1 mm 0 mm 8145 

4.1 mm 1 mm 8146 

4.1 mm 2 mm 8147 

4.1 mm 3 mm 8148 

4.1 mm 4 mm 8149 

4.1 mm 5 mm 8150 

5.0 mm 1 mm 8164 

5.0 mm 2 mm 8165 

5.0 mm 3 mm 8166 

5.0 mm 4 mm 8167 

5.0 mm 5 mm 8168 

5.0 mm 6 mm 8169 


Item No. 


Item No. 

Locator Male Processing Package 

2 Sets, each Set includes: 1 Processing Replacement 

Male 8515, 1 Replacement Male 

8524/ 8527/8529, 1 Spacer white 

Locator Replacement Male 

clear, 4 Pack 

Locator Light Retention Replacement Male 

pink, 4 Pack 

8519 

8524 

8527 

Locator Extended Range Replacement Male 

green, 4 Pack 

Locator Extra Light Extended Range Male 

red, 4 Pack 

Locator Black Processing Replacement Male 

4 Pack 

8547 

8548 

8515 

Locator Extra Light Retention Replacement 

Male, blue, 4 Pack 

8529 

Locator Parallel Post 

4 Pack 

8517 

Locator Impression Coping 

4 Pack 

8505 

Locator Female Analog 

4.1 mm Diameter. 4 Pack 

5.0 mm Diameter. 4 Pack 

8530 

8516 

Locator 

Parallel Post 

Locator Impression 

Coping 

Female Analog 

Ø 4.1 mm 

Female Analog 

Ø 5.0 mm 

Angle Measurement Guide 

9530 

Angle Measurement 

Guide 

Locator Core Tool 

8393 

Locator Abutment Driver 

15 mm length 

21 mm length 

8926 

8927 


06-TW20


BICORTICAL ® 

ENDOPORE® 19 

O-Ring Abutment System (ORS) Impl. Ø mm Collar Length Item No. 


The red O-Ring is used for laboratory set-up 

and the white O-Ring is used for the finished 

overdenture. The O-Ring abutment system can 

accommodate up to 5 degrees of divergence 

between implants. 


abutment and an ORS lab kit which includes 

a brass abutment analog, metal housing, 


Note 

Please refer to page 32 for O-Ring Abutment 

System. 

Ø 4.1 1 mm 4 mm 04I-1ORS 

Ø 4.1 2 mm 5 mm 04I-2ORS 

Ø 4.1 3 mm 6 mm 04I-3ORS 

Ø 4.1 4 mm 7 mm 04I-4ORS 

Ø 4.1 5 mm 8 mm 04I-5ORS 

Ø 4.1 6 mm 9 mm 04I-6ORS 

Ø 4.1 7 mm 10 mm 04I-7ORS 

Ø 5.0 1 mm 4 mm 04WI-1ORS 

Ø 5.0 2 mm 5 mm 04WI-2ORS 

Ø 5.0 3 mm 6 mm 04WI-3ORS 

Ø 5.0 4 mm 7 mm 04WI-4ORS 

Ø 5.0 5 mm 8 mm 04WI-5ORS 

Ø 5.0 5 mm 9 mm 04WI-6ORS 

O-Ring Accessories Item No. Item No. 

O-Ring Lab Kit 

Metal Housing 

06-ORS 

07-0044 

White O-Rings 

Package of 10 

06-O/ORS 

Dalla Bona Abutment System Impl. Ø mm Collar Length Item No. 


The Dalla Bona abutment is a ball & socket 

type connector. Its spherical design allows 

up to 15 degrees divergence between the 

abutments. 


male abutment, a brass abutment analog, 

a titanium female with a PVC ring and a 

spacer. 

Note 

Please refer to page 33 for Dalla Bona Abutment 

System. 

Dalla Bona Accessories 

Dalla Bona Replacement Female Cap 

Includes a brass abutment analog, a titanium 

female with a PVC ring and a spacer. 

Ø 4.1 1 mm 4 mm 04I-1DB 

Ø 4.1 2 mm 5 mm 04I-2DB 

Ø 4.1 3 mm 6 mm 04I-3DB 

Ø 4.1 4 mm 7 mm 04I-4DB 

Ø 4.1 5 mm 8 mm 04I-5DB 

Ø 4.1 6 mm 9 mm 04I-6DB 

Ø 4.1 7 mm 10 mm 04I-7DB 

Ø 5.0 1 mm 4 mm 04WI-1DB 

Ø 5.0 2 mm 5 mm 04WI-2DB 

Ø 5.0 3 mm 6 mm 04WI-3DB 

Ø 5.0 4 mm 7 mm 04WI-4DB 

Ø 5.0 5 mm 8 mm 04WI-5DB 

Ø 5.0 6 mm 9 mm 04WI-6DB 

Ø 5.0 7 mm 10 mm 04WI-7DB 

Item No. 

07-1012 



of an attachment. 

07-1017 



an attachment. 

07-1018

ENDOPORE ® 


UMA System Impl. Ø mm Collar Item No. 

UMA System Abutments 

The UMA (Universal Modification Abutment) 

system is used for screw retained restorations 

where it is desired to have the points of 

attachment superior to the soft tissue. Where 

there is insufficient clearance to use a UMA 

or when a sub-gingival separation is desired, 

a UCLA abutment can be used to achieve separation 

of the restoration at the implant level. 

The UMA is a transmucosal collar that should 

be secured to the implant with 30 Ncm of 

torque. The UMA screw used to secure the 

restoration to the abutment is packaged with 

each UMA plastic coping. A 0.05“ hex driver 

is used to secure the screw which should 

only be tightened to 20 Ncm. 

Ø 4.1 2.0 mm 02I-2.0UMA 

Ø 4.1 3.0 mm 02I-3.0UMA 

Ø 4.1 4.0 mm 02I-4.0UMA 

Ø 4.1 5.0 mm 02I-5.0UMA 

Ø 4.1 6.0 mm 02I-6.0UMA 

Ø 4.1 7.0 mm 02I-7.0UMA 

Ø 4.1 8.0 mm 02I-8.0UMA 

Ø 5.0 3.0 mm 02WI-3.0UMA 

Ø 5.0 4.0 mm 02WI-4.0UMA 

Ø 5.0 5.0 mm 02WI-5.0UMA 

Ø 5.0 6.0 mm 02WI-6.0UMA 

Note 

Please refer to pages 34 – 35 for UMA 

System. 

20

External hex 


21 

Endopore Implants with 

external hex for one-stage 


Endopore Implants with external hex are compatible with a 

wide variety of prosthetic products for crown and bridge and 

overdenture restorations including UCLA, UMA, Dalla Bona, 

Overdenture and O-Ring Abutment Systems. All implants are 

packaged with colour coded labels that identify their diameters. 

All prosthetic components must be matched to the 

diameter of implant to which they are to be connected. Abutment 

labels have the same color coding as the corresponding 

implants.

ENDOPORE ® 


Endopore Implants with external hex 

22 

The Endopore External Hex Connection implants are available 

in three diameters: 3.5 mm, 4.1 mm and 5.0 mm. 

A low profile cover screw is packaged with each implant. The 

4.1 mm and 5.0 mm diameter are available with a 1 mm or 2 

mm smooth coronal region. The 3.5 mm diameter implant is 

available in a 1 mm smooth coronal region. 

SCR* 

Length 

3.5 mm diameter implant 

The 3.5 mm diameter implant is packaged in a red labeled box 

(01M-range). This implant has a 0.9 mm high x 2.0 mm flat-toflat 

hex and a UNF thread. 


The 4.1 mm diameter implants with the industry standard hex 

are packaged in green labeled boxes (01B-range). These 

implants have a 0.7 mm high x 2.7 mm flat-to-flat hex and a 

metric thread. 


The 5.0 mm diameter implants are packaged in turquoise 

labeled boxes (01WB-range). These implants have a 0.9 mm 

high x 2.7 mm flat-to-flat hex and metric thread. 

Diameter 

SCR* 1 mm 

Length 

SCR* Length Item No. 


1 mm 9 mm 01M-9I1 


* SCR – Smooth Coronal Region 

Diameter 

Diameter 

SCR* 2 mm 

Length 

1 mm 7 mm 01B-7I1 

2 mm 7 mm 01B-7I2 

1 mm 9 mm 01B-9I1 

2 mm 9 mm 01B-9I2 

1 mm 12 mm 01B-12I1 

2 mm 12 mm 01B-12I2 


1 mm 5 mm 01WB-5I1 

1 mm 7 mm 01WB-7I1 

2 mm 7 mm 01WB-7I2 

1 mm 9 mm 01WB-9I1 

2 mm 9 mm 01WB-9I2 

1 mm 12 mm 01WB-12I1 

2 mm 12 mm 01WB-12I2



23 



Surgery 


Abutment 


Abutment 

Impression 

Stage 





Flared Hexed 

Abutment 

Angled Hexed 

Abutment 

Angled Hexed 

Abutment 

Straight Hexed 

Abutment 

Hexed UCLA 

Abutment 

Non-Hexed UCLA 

Abutment 

Laboratory 

Processing 

15° 25° 

Final 

Restoration 

Crown 

Bridge

ENDOPORE ® 




Surgery 


Abutment 

24 

Impression 

Stage 

Locator 

System 

O-Ring 

System 

Dalla Bona 

System 

Laboratory 

Processing 

Final 

Restoration 

Overdenture



25 


UMA Healing Cap 


Surgery 

Standard UMA System Abutment 

Impression 

Stage 

Single Crown 

Bridge, Bar and Clip 

O-Ring 

Step 1 

Step 1 

Step 2 

Step 2 

Laboratory 

Processing 

Final 

Restoration 

Crown 

Bridge 

Bar 

Overdenture

ENDOPORE ® 



Cover Screws Impl. Ø mm Item No. 


A low profile cover screw is packaged with 

each implant. 

3.5 mm 02M-CS 

4.1 mm 02B-CS 

5.0 mm 02WB-CS 

Healing Abutments Impl. Ø mm Length Width Item No. 

26 

Straight Healing Abutments 

The straight healing abutment is used in all 

situations except where an expanded gingival 

cuff is desired. 

Ø 3.5 3 mm 3.5 mm 02M-3HS 

Ø 3.5 5 mm 3.5 mm 02M-5HS 

Ø 3.5 7 mm 3.5 mm 02M-7HS 

Ø 4.1 3 mm 4.1 mm 02B-3HS 

Ø 4.1 5 mm 4.1 mm 02B-5HS 

Ø 4.1 7 mm 4.1 mm 02B-7HS 

Ø 5.0 3 mm 5.0 mm 02WB-3HS 

Ø 5.0 5 mm 5.0 mm 02WB-5HS 

Ø 5.0 7 mm 5.0 mm 02WB-7HS 

Flared Healing Abutments 

The use of a flared healing abutment allows 

the gingiva to heal around this expanded profile, 

where a more natural emergence profile 

is preferred. 

Ø 3.5 4 mm 4.7 mm 02M-4H 

Ø 3.5 6.5 mm 4.7 mm 02M-6.5H 

Ø 4.1 4 mm 5.5 mm 02B-4H 

Ø 4.1 6.5 mm 5.5 mm 02B-6.5H 

Ø 5.0 4 mm 6.4 mm 02WB-4H 

Ø 5.0 6.5 mm 6.4 mm 02WB-6.5H 

Width 

Width 

Length 

Length 


Abutment 


Abutment



27 

Transfer Copings Impl. Ø mm Length Width Item No. 

The shape of the transfer coping matches the 

shape of the corresponding healing abutment 

and this allows the profile of the gingival cuff 

to be accurately reproduced 

in the working model. 

Straight Transfer Copings 

for use with straight healing abutments 

Ø 3.5 11 mm 3.5 mm 06M-CTCA/S 

Ø 3.5 16 mm 3.5 mm 06M-CTCA/SL 

Ø 4.1 11 mm 4.1 mm 06B-CTCA/S 

Ø 4.1 16 mm 4.1 mm 06B-CTCA/SL 

Ø 5.0 11 mm 5.0 mm 06WB-CTCA/S 

Ø 5.0 16 mm 5.0 mm 06WB-CTCA/SL 

Flared Transfer Copings 

for use with flared healing abutments 

Ø 3.5 11 mm 4.7 mm 06M-CTCA/F 

Ø 4.1 11 mm 5.5 mm 06B-CTCA/F 

Ø 4.1 16 mm 5.5 mm 06B-CTCA/FL 

Ø 5.0 11 mm 6.4 mm 06WB-CTCA/F 

Transfer Coping Screw, long 

for optional use with transfer copings, when 

an „open tray” technique is used 

Ø 3.5 16 mm 06-TC/SL 

Ø 4.1 16 mm 06B-TC/SL 

Ø 5.0 16 mm 06B-TC/SL 

Closed Impression 

Straight Transfer Copings 11 mm 

Flared Transfer Copings 11 mm 

marking 

marking 

marking 

marking 

marking 

marking 

Ø 3.5 

Ø 4.1 Ø 5.0 Ø 3.5 Ø 4.1 Ø 5.0 

Open Impression 

Transfer Coping Screw for optional use 16 mm 

marking 

Ø 3.5 Ø 4.1 

Ø 5.0

ENDOPORE ® 


Implant Analogs Impl. Ø mm Length Qty. Item No. 

Implant Analogs 

Material: Aluminum 

Ø 3.5 9 mm 1 06M-IA/1 

Ø 3.5 9 mm 5 06M-IA 

Ø 4.1 9 mm 1 06B-IA/1 

Ø 4.1 9 mm 5 06B-IA 

Ø 5.0 9 mm 1 06WB-IA/1 

Ø 5.0 9 mm 5 06WB-IA 

Implant Analog 

Material: Stainless Steel 

Ø 3.5 9 mm 1 06M-PIA 

Ø 3.5 9 mm 5 06M-PIA/5 

Ø 4.1 9 mm 1 06B-PIA 

Ø 4.1 9 mm 5 06B-PIA/5 

Ø 5.0 9 mm 1 06WB-PIA 

Ø 5.0 9 mm 5 06WB-PIA/5 

28 

Aluminum 

Stainless Steel 

Ø 3.5 Ø 4.1 Ø 5.0 Ø 3.5 Ø 4.1 Ø 5.0 

Retaining Screws Impl. Ø mm Item No. 

Retaining Screw (replacement) 

for use with hexed and UCLA abutments 

Titanium Alloy Replacement Screw 

Ø 3.5 

Ø 4.1/5.0 

05-2RS 

05B-2RS 

Gold Alloy Replacement Screw 

Ø 3.5 

Ø 4.1/5.0 

05M-2RS/G 

05B-2RS/G 

All abutments are packaged with a titanium 

retaining screw.



29 

Hexed Abutments Impl. Ø mm Length Collar Item No. 

These abutments are used for cement retained 

crown or bridge restorations. 

Straight Hexed Abutments 


The straight hexed abutment has a parallel 

sided transgingival collar. These abutments 

are available in both regular (grooved – FS) 

and thick wall (not grooved – FN) versions. 

Ø 3.5 7 mm 1.5 mm 05M-7FS 

Ø 3.5 7 mm 1.5 mm 05M-7FN 

Ø 3.5 9 mm 3.5 mm 05M-9FN 

Ø 4.1 7 mm 1.5 mm 05B-7FS 

Ø 4.1 7 mm 1.5 mm 05B-7FN 

Ø 4.1 9 mm 3.5 mm 05B-9FS 

Ø 4.1 9 mm 3.5 mm 05B-9FN 

Ø 4.1 11 mm 5.5 mm 05B-11FS 

Ø 4.1 11 mm 5.5 mm 05B-11FN 

Ø 5.0 7 mm 1.5 mm 05WB-7FS 

Ø 5.0 7 mm 1.5 mm 05WB-7FN 

Ø 5.0 9 mm 3.5 mm 05WB-9FS 

Ø 5.0 9 mm 3.5 mm 05WB-9FN 

Ø 5.0 11 mm 5.5 mm 05WB-11FS 

Ø 5.0 11 mm 5.5 mm 05WB-11FN 

Length 

Length 

Collar 

FN 

FS 

Flared Hexed Abutments 


The flared hexed abutment is designed for 

restorations requiring a natural emergence 

profile. These abutments are available in both 

regular (grooved – UF) and thick wall (not 

grooved – UN) versions. 

Ø 3.5 8.5 mm 2 mm 05M-8.5UN 

Ø 3.5 9 mm 2 mm 05M-9UF 

Ø 4.1 8.5 mm 2 mm 05B-8.5UN 

Ø 4.1 10 mm 2 mm 05B-10UF 

Ø 4.1 11.5 mm 3.5 mm 05B-11.5UN 

Ø 5.0 8.5 mm 1.5 mm 05WB-8.5UN 

Ø 5.0 8 mm 1.5 mm 05WB-8UF 

Ø 5.0 10.5 mm 3.5 mm 05WB-10.5UN 

Length 

Length 

Collar 

UN 

UF

ENDOPORE ® 


Hexed Abutments Impl. Ø mm Length Angle Item No. 

Angled Hexed Abutments 


Angled abutments compensate for large divergences 

in implant alignment. Angled guide 

pins are available in the Prosthetic Instrumentation 

section of this catalog, pages 36 – 37. 

Ø 3.5 11 mm 15˚ 05M-15FA 

Ø 3.5 11 mm 25˚ 05M-25FA 

Ø 4.1 11 mm 15˚ 05B-15FA 

Ø 4.1 11 mm 25˚ 05B-25FA 

Ø 5.0 11 mm 15˚ 05WB-15FA 

Ø 5.0 11 mm 25˚ 05WB-25FA 

15° 

25° 

Temporary Titanium Abutments Impl. Ø mm Item No. 

30 

Temporary Abutments 


Hexed Temporary Abutment 

Ø 3.5 

Ø 4.1 

Ø 5.0 

05M-TEMP/H 

05B-TEMP/H 

05WB-TEMP/H 

Non-Hexed Temporary Abutment 

Ø 3.5 

Ø 4.1 

Ø 5.0 

05M-TEMP 

05B-TEMP 

05WB-TEMP



UCLA Abutments 

UCLA abutments provide a foundation to which wax can be 

added to shape a screw-retained crown or bridge or a custom 

abutment. See the Prosthetic Instrumentation section for the 

lapping tool used to polish the cast surface that will mate with 

the implant. A reamer is also available to clean out the retaining 

screw hole in the casting. Gold base abutments have ma- 


chined surfaces and will not require finishing with these tools. 

Hexed UCLA abutments should be used for custom abutments 

and for supporting crowns as they will resist the rotational 

forces associated with single tooth screw retained restorations. 

Non-hexed UCLA abutments should be used for supporting 

screw retained bridges. 

31 

UCLA Abutments Impl. Ø mm Item No. 

UCLA Plastic Abutments 


Hexed, green 

Hexed, yellow 

Hexed, blue 

Non-Hexed, white 

Non-Hexed, white 

Non-Hexed, yellow 

Ø 3.5 

Ø 4.1 

Ø 5.0 

Ø 3.5 

Ø 4.1 

Ø 5.0 

06M-UCLA/H 

06B-UCLA/H 

06WB-UCLA/H 

06M-UCLA 

06B-UCLA 

06WB-UCLA 

Hexed 

Non-Hexed 

UCLA Gold Base Abutments, metal alloy for 

porcelain fusing 


Important 

The melting range is 1232 – 1260˚C (2250 – 2300˚F), refer to package instructions 

for further details. 

Hexed 

Ø 3.5 

Ø 4.1 

Ø 5.0 

06M-UCLA/H/G 

06B-UCLA/H/G 

06WB-UCLA/H/G 

Non-Hexed 

Ø 3.5 

Ø 4.1 

Ø 5.0 

06M-UCLA/G 

06B-UCLA/G 

06WB-UCLA/G 

Hexed 

Non-Hexed 

UCLA Gold Base Abutments, alloy not for 

porcelain fusing 


Hexed Gold Base UCLA Abutment 

Important 

The melting range is 1400 – 1490˚C (2550 – 2710˚F), refer to package instructions 

for further details. 

Ø 3.5 

Ø 4.1 

Ø 5.0 

06M-UCLA/H/GNC 

06B-UCLA/H/GNC 

06WB-UCLA/H/GNC 

Non-Hexed Gold Base UCLA Abutment 

Ø 3.5 

Ø 4.1 

Ø 5.0 

06M-UCLA/GNC 

06B-UCLA/GNC 

06WB-UCLA/GNC 

Hexed 

Non-Hexed

ENDOPORE ® 



Locator System Impl. Ø mm Collar Item No. 

32 









Note 

Please refer to pages 9 and 18 for Locator 

System and its components. 

3.5 mm 1 mm 8851 

3.5 mm 2 mm 8852 

3.5 mm 3 mm 8853 

3.5 mm 4 mm 8854 

4.1 mm 0.73 mm 8681 

4.1 mm 2 mm 8682 

4.1 mm 3 mm 8683 

4.1 mm 4 mm 8684 

5.0 mm 1.35 mm 8691 

5.0 mm 2 mm 8691 

5.0 mm 3 mm 8691 

5.0 mm 4 mm 8691 

O-Ring Abutment System (ORS) Impl. Ø mm Collar Length Item No. 


The O-Ring abutment system can accommodate 

up to 5 degrees of divergence between 

implants. 


abutment and an ORS lab kit which includes 

a brass abutment analog, metal housing, 


Length 

Note 

The red O-Ring is used for laboratory set-up 

and the white O-Ring is used for the finished 

overdenture. 

O-Ring Accessories 

O-Ring Lab Kit 

Metal Housing 

White O-Rings 

Package of 10 

Collar 

Ø 3.5 1 mm 4 mm 04M-1ORS 

Ø 3.5 2 mm 5 mm 04M-2ORS 

Ø 3.5 3 mm 6 mm 04M-3ORS 

Ø 3.5 4 mm 7 mm 04M-4ORS 

Ø 3.5 5 mm 8 mm 04M-5ORS 

Ø 4.1 1 mm 4 mm 04B-1ORS 

Ø 4.1 2 mm 5 mm 04B-2ORS 

Ø 4.1 3 mm 6 mm 04B-3ORS 

Ø 4.1 4 mm 7 mm 04B-4ORS 

Ø 4.1 5 mm 8 mm 04B-5ORS 

Ø 4.1 6 mm 9 mm 04B-6ORS 

Ø 4.1 7 mm 10 mm 04B-7ORS 

Ø 5.0 1 mm 4 mm 04WB-1ORS 

Ø 5.0 2 mm 5 mm 04WB-2ORS 

Ø 5.0 3 mm 6 mm 04WB-3ORS 

Ø 5.0 4 mm 7 mm 04WB-4ORS 

Ø 5.0 5 mm 8 mm 04WB-5ORS 

Ø 5.0 6 mm 9 mm 04WB-6ORS 

Item No. 

06-ORS 

07-0044 

06-O/ORS



33 

Dalla Bona Abutment System Impl. Ø mm Collar Length Item No. 


The Dalla Bona abutment is a ball & socket 

type connector. Its spherical design allows 

up to 15 degrees divergence between the 

abutments. 


male abutment, a brass abutment analog, 

a titanium female with a PVC ring and a 

spacer. 

Length 

Collar 

Dalla Bona Plus Accessories 

Dalla Bona Plus 

Keeping the same benefits as the Dalla 

Bona System, the Dalla Bona Plus female attachment 

is a gold insert that can be easily 

replaced and adjusted with Dalla Bona Plus 

Activating/Deactivating Tool. Includes a brass 

abutment analog, a titanium cap with a gold 

female insert, and a spacer. 

Dalla Bona Plus Activating/Deactivating Tool 

An instrument used to increase and reduce 

the retention of an attachment. 

Ø 3.5 1 mm 4 mm 04M-1DB 

Ø 3.5 2 mm 5 mm 04M-2DB 

Ø 3.5 3 mm 6 mm 04M-3DB 

Ø 3.5 4 mm 7 mm 04M-4DB 

Ø 3.5 5 mm 8 mm 04M-5DB 

Ø 3.5 6 mm 9 mm 04M-6DB 

Ø 3.5 7 mm 10 mm 04M-7DB 

Ø 4.1 1 mm 4 mm 04B-1DB 

Ø 4.1 2 mm 5 mm 04B-2DB 

Ø 4.1 3 mm 6 mm 04B-3DB 

Ø 4.1 4 mm 7 mm 04B-4DB 

Ø 4.1 5 mm 8 mm 04B-5DB 

Ø 4.1 6 mm 9 mm 04B-6DB 

Ø 4.1 7 mm 10 mm 04B-7DB 

Ø 5.0 1 mm 4 mm 04WB-1DB 

Ø 5.0 2 mm 5 mm 04WB-2DB 

Ø 5.0 3 mm 6 mm 04WB-3DB 

Ø 5.0 4 mm 7 mm 04WB-4DB 

Ø 5.0 5 mm 8 mm 04WB-5DB 

Ø 5.0 6 mm 9 mm 04WB-6DB 

Ø 5.0 7 mm 10 mm 04WB-7DB 

Item No. 

07-0480 

07-0489 

Dalla Bona Accessories 

Dalla Bona Replacement Female Cap 

Includes a brass abutment analog, a titanium 

female with a PVC ring and a spacer. 

Item No. 

07-1012 



of an attachment. 

07-1017 



an attachment. 

07-1018

ENDOPORE ® 


UMA System Impl. Ø mm Collar Item No. 

34 

UMA System Abutments 

The UMA (Universal Modification Abutment) 

system is used for screw retained restorations 

where it is desired to have the points of 

attachment superior to the soft tissue. Where 

there is insufficient clearance to use a UMA 

or when a sub-gingival separation is desired, 

a UCLA abutment can be used to achieve separation 

of the restoration at the implant level. 

The UMA is a transmucosal collar that should 

be secured to the implant with 30 Ncm of 

torque. The UMA screw used to secure the 

restoration to the abutment is packaged with 

each UMA plastic coping. A 0.05“ hex driver 

is used to secure the screw which should 

only be tightened to 20 Ncm. 

Standard UMA System Abutment 

The upper diameter for all UMA System 

Abutments is 3.85 mm. 

Ø 3.5 3.5 mm 02M-3.5UMA 

Ø 3.5 4.5 mm 02M-4.5UMA 

Ø 3.5 5.5 mm 02M-5.5UMA 

Ø 3.5 6.5 mm 02M-6.5UMA 

Ø 4.1 2.5 mm 02B-2.5UMA 

Ø 4.1 3.0 mm 02B-3.0UMA 

Ø 4.1 4.0 mm 02B-4.0UMA 

Ø 4.1 5.0 mm 02B-5.0UMA 

Ø 4.1 6.0 mm 02B-6.0UMA 

Ø 4.1 7.0 mm 02B-7.0UMA 

Ø 4.1 8.0 mm 02B-8.0UMA 

Ø 5.0 3.5 mm 02WB-3.5UMA 

Ø 5.0 4.5 mm 02WB-4.5UMA 

Ø 5.0 5.5 mm 02WB-5.5UMA 

Ø 5.0 6.5 mm 02WB-6.5UMA 

Collar 


Item No. 


2 mm length 

07-2120 

UMA Transfer Copings 

Item No. 

UMA Hexed Transfer Coping 

Single tooth open tray 

UMA Guide Pin 

für 07-0090 

07-0090 

07-0062 

UMA Non-Hexed Transfer Coping 

for bridge construction 

07-0080


BICORTICAL ® 

UMA Analogs 

Item No. 

Brass 

07-0015 


UMA retaining screw included 

07-0162 

Brass 


UMA Copings 

Item No. 

UMA Temporary Non-Hexed Coping 


07-0352 

UMA Hexed Plastic Coping 


blue 

07-0202 

UMA Non-Hexed Plastic Coping 


yellow 

07-0252 

UMA Non-Hexed Gold Coping 


07-0252/G 

UMA Temporary 

Non-Hexed Coping 

UMA Hexed Plastic 

Coping 

UMA Non-Hexed 

Plastic Coping 

ENDOPORE® 35 

UMA Non-Hexed 

Gold Coping 

UMA Replacement Components 

Item No. 

UMA Non-Hexed Plastic Coping 

for Bar 

07-0270 

UMA Retaining Screw 

07-0052 

Gold Plated Bar Clip 

CM Rider 

07-0120 

UMA Hexed Plastic 

Coping 

UMA 

Retaining Srew 

Gold Plated 

Bar Clip 

UMA Bar Kit 

Item No. 

UMA Bar Kit 

Includes 4 bars, a spacer bar, 4 retaining 

screws, 4 plastic cylinders, and 4 gold plated 

clips 

07-5540 

UMA O-Ring System 

Item No. 

UMA O-Ring System 

Each abutment is packaged with an ORS lab kit 

that includes a brass abutment analog, metal 

housing, 3 red O-Rings and 3 white O-Rings. 

07-4400 

Note 

The red O-Ring is used for 

laboratory set-up and the 

white O-Ring is used for the 

finished overdenture.

ENDOPORE ® 

Prosthetics 

Prosthetic Instrumentation 

Item No. 

Hex Driver, 0.05“ 

extra short, 9 mm 

short, 13 mm 

long, 18 mm 

06-HDXS 

06-HDS 

06-HDL 

36 

9 mm 

13 mm 

18 mm 

extra short short long 



For use with UMA System and Locator System 

(Ncm – Newton centimeters) 

06-TW30 

06-TW20 


Driver Extension 

07-0190 

07-0195 


Driver Extension 

Driver Tips 

fit Driver Housing and Torque Wrenches 


06-TWHT 

0.05“ Hex Tip – Short 

06-TWHTS 

UMA Abutment Driver 

ORS and Dalla Bona Abutment Driver 

07-1150 

07-0140 

Hex Tip 

12.5 mm 

Hex Tip short 

6.5 mm 

UMA Abutment 

Driver 

ORS-, Dalla Bona 

Abutment Driver

Prosthetics 


37 

Prosthetic Instrumentation 

Latch Driver 

0.05“ Hex Latch Type Driver 

Item No. 

07-0125 

UMA Friction Grip Driver 

Friction driver for UMA non-hexed transfer 

coping and UMA O-Ring Abutment 

07-0004 

Guide Pin 

for angled abutment selection 

15° angled 

25° angled 

06-15AAGP 

06-25AAGP 

15° 

25° 

Reamer 

for use with UMA abutment castings 

for use with UCLA abutment castings 

07-0150 

06-REM 

Lapping Tool with guide pin 

for use with UMA and UCLA abutment castings 

and all platforms 

07-0155WP 

Waxing Sleeve 

06-WS

ENDOPORE ® 

Surgery 

Surgery 

38 

Comprehensive Surgical Kit 

Surgical Instrument Tray, fully equipped 

06-ITSTART 

Content of a full equipped tray 

2.3 mm Round Bur 06-RB 

2.5 mm Twist Drill – short 06-2.5TDS 

2.5 mm Twist Drill – long 06-2.5TDL 

3.5 mm Implant Bur, 9 mm 06M-9IB 

4.1 mm Implant Bur, 7 mm 06-7IB 



5.0 mm Implant Bur, 5 mm 06W-5IB 




Drill Extension 

06-DE 

3.5 mm Trial Fit Gage, 9 mm 06M-9TFG/O 

4.1 mm Trial Fit Gage, 7 mm 06-7TFG/O 



5.0 mm Trial Fit Gage, 5 mm 06W-5TFG/O 




Paralleling Pins, Pack of 4 

06-PP 

Mallet 

06-M/L 

Punch Handle, straight 06-H 

Punch Handle, offset 

06-HOS 

Stainless Steel Punch Tip 

06-PTM 

Tip Wrench 

06-TW 

Hex Driver 0.05“ – short 

06-HDS 

Radiographic Overlays, 2 Pack 

06-RO 

Surgical Video on DVD 

Item No. 

06-SV 

Endopore Surgical Kits 

for use with all Endopore Implants with internal connection, 

internal hex and external hex. 

Endopore Osteotome Kit 

Endopore Osteotome Kit 

Osteotome Instrument Tray, fully equipped 

Content of a full equipped tray 

Osteotome Tip #1 



Stainless Steel Punch Tip 

Punch Handle, straight, Pack of 4 

Punch Handle, offset, one 

Mallet 

Osteotome Instrument Tray, empty 

Item No. 

06-OTKIT 

06-OT1 

06-OT2 

06-OT3 

06-PTM 

06-H 

06-HOS 

06-M/L 

06-ITM/S2 

Surgical Instrument Tray, empty 

06-ITM/S1

Surgery 


39 

Endopore Surgical Instrumentation 

Burs and Drills 

Crestotom 

for the removal of soft tissue, for smoothing 

and levelling of the alveor crest 

Initial Perforation (IP) Drill 

for initial perforation of the compact cortical 

bone, Ø 2.00 

Item No. 

1452 

90024 

Round Bur 

Ø 2.3 mm 

06-RB 

Twist Drill 

short, Ø 2.5 mm, total length 30 mm 

long, Ø 2.5 mm, total length 39 mm 

06-2.5TDS 

06-2.5TDL 

Implant Burs Length Item No. 

Implant Burs 

for implant Ø 3.5 mm 

9 mm 06M-9IB 


7 mm 06-7IB 

9 mm 06-9IB 

12 mm 06-12IB 


5 mm 06W-5IB 

7 mm 06W-7IB 

9 mm 06W-9IB 

12 mm 06W-12IB

ENDOPORE ® 

Surgery 



Item No. 

06-DE 

Trial Fit Gages/Osteotome Final Tips Length Item No. 

Trial Fit Gages/Osteotome Final Tips 


9 mm 06M-9TFG/O 


7 mm 06-7TFG/O 

9 mm 06-9TFG/O 

12 mm 06-12TFG/O 

40 


The trial fit gages are threaded to connect 

to the punch handles. The trial fit gage corresponding 

to the size of the implant to be 

placed, acts as the final osteotome tip. 

5 mm 06W-5TFG/O 



12 mm 06W-12TFG/O 

Paralleling Pin 

Item No. 

Paralleling Pin 

for use with 2.5 mm twist drill 

06-PP 

Mallet and Punch Handles 

Item No. 

Mallet 

06-M/L 

Punch Handles 

for use in conjunction with osteotome tips and 

trial fit gages for osteotome technique 

straight 

offset 

06-H 

06-HOS 

straight 

offset

Surgery 


41 

Punch Tips 

Stainless Steel Punch Tip for implant 

placement 

For use with all diameters. Connects to punch 

handle. 

Item No. 

06-PTM 

Osteotome Punch Tips 

Osteotome punch tips connect to the punch 

handles. 




06-OT1 

06-OT2 

06-OT3 

Tip #1 Tip #2 Tip #3 

Wrench and Driver 

Tip Wrench 

The tip wrench is used for tightening or 

loosening trial fit gages, punch tip and 

osteotome tips to the punch handles. 

Item No. 

06-TW 

Hex Driver 0.05” – short 

length 13 mm 

06-HDS 

13 mm 

Cover Screw Trephines 

Item No. 

Cover Screw Trephines 




Tissue Punch 

Tissue Punch 

The metal tissue punch attaches to the drill 

handpiece and will cleanly section a 4.3 mm 

diameter flap of tissue over the implant. 

06M-3.5TR/CS 

06-4.1TR/CS 

06W-5.0TR/CS 

Item No. 

06-TP

ENDOPORE ® 

Articles in alphabetic order 

Articles in alphabetic order 

Item 

Page 

Item 

Page 

42 

Angled Abutments for 

- External Hex 30 

- Internal Hex 16 

Cementable Abutments for Internal Connection 7 

Cover Screw for 

- Internal connection 7 



Cover Screw Trephines 41 

Crestotom 39 

Dalla Bona Abutment System for 

- Internal Connection 10 



Drill Extension 40 

Driver Extension 36 

Driver Housing 8/10/36 

Driver Tips 36 

ECO Abutment System 7 

Guide Pin 37 

Healing Abutments for 



Hex Driver 36/41 

Hex Tip 0.05" 8/36 

Hex Tip 0.05", short 36 

Hex Abutments for 


- External Hex 29/30 

Implant Analogs for 



Implant Burs 39 

Implants with 




Initial Perforation (IP) Drill 39 

Insertion Tip 8 

Latch Driver 37 

Lapping Tool with guide pin 37 

Locator Abutments for 




Mallet 40 

Octabutment System 8 

O-Ring Abutment System (ORS) for 




Osteotome Instrument Tray, fully equipped 38 

Paralleling Pin 40 

Punch Handles 40 

Punch Tips 41 

Reamer 37 

Retaining Screws 15/28 

Round Bur 39 

Surgical Instrument Tray, fully equipped 38 

Temporary Titanium Abutments 30 

Tip Wrench 41 

Tissue Punch 41 

Torque Wrench 20 Ncm Ratchet 9/18/36 

Torque Wrench 30 Ncm Ratchet 36 

Transfer Copings for 



Trial Fit Gages/Osteotome Final Tips 40 

Twist Drills 39 

UCLA-Abutments for 



UMA O-Ring Abutment System for External Hex 35 

UMA System for 



UMA Abutment Driver 36 

UMA Friction Grip Driver 37 

Waxing Sleeve 37

ENDOPORE ® Implant 

Internal 

Connection 

Internal Hex 

Osteotome PROCEDURES 

peRfect 

External Hex 

INTERNAL HEX 

PerfeCT SURFACE 

EXTERNAL HEX 

NTERNAL 

PERFECT SURFACE 

Implant Placement Procedure 

Sybron Implant Solutions 

A World of Implant Solutions 

The dental implant platform of Sybron Dental Specialties (SDS) 

brings together three organizations that have been leaders 

in implant manufacturing, design and development since the 

inception of implant dentistry. 

Delivering two of the most respected, leading-edge dental 

implants on the market – ENDOPORE ® and PITT-EASY ® – we 

are giving you access to a world of implant solutions. 

Manufacturer: 

Sybron Implant Solutions 

1717 West Collins Avenue 

Orange, California 92867 · United States 

www.sybronimplants.com 

Distributed by: 

Sybron Implant Solutions GmbH 

Julius-Bamberger-Straße 8a · 28279 Bremen · Germany 

Phone +49 421 43939-0 · Fax +49 421 443936 

www.sybronimplants.de · info@sybronimplants.de 

07-0189: 06/07

Endopore Implants with external hex - Optident

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?