Planning Applications PDF 1 MB - Meetings, agendas and minutes

3) The development hereby permitted shall not commence prior to the submission
and approval in writing by the Council of details and samples, where appropriate,
of all materials to be used on the external faces of the building, other building
works and no part of the development shall be used or occupied prior to the
implementation of the approved details.
To ensure a satisfactory external appearance and to prevent harm to the street
scene, in accordance with Policies DM G1, DM G3 and DM G7 of the
Development Management Local Plan, and Policy BE1 of the Core Strategy 2011.
4) No plumbing, extract flues or pipes, other than rainwater pipes shall be fixed on
the external elevations of the detailed part of the development hereby approved,
unless otherwise agreed in writing by the Council.
To ensure a satisfactory external appearance in accordance with policies BE1 of
the Hammersmith and Fulham Core Strategy (2011) and Policies DM G1, DM G3
and DM G7 of the Development Management Local Plan.
5) The additional class B1 (office) use shall not be occupied (excluding works relating
to fitting out this use) until confirmation that a BREEAM rating of very good has
been submitted to and approved in writing by the Council.
In the interests of energy conservation, reduction of CO2 emissions and wider
sustainability measures as recommended within the Energy Statement should be
undertaken to ensure as a minimum a 25% carbon reduction in accordance with
policies 5.1, 5.2, 5.3, 5.6 and 5.7 of the London Plan (2011), policies DM H1 and
DM H2 of the Development Management Local Plan, policy CC1 of the London
Borough of Hammersmith and Fulham Core Strategy (2011).
6) Prior to occupation (excluding internal fit out works) of the development, details
shall be submitted to the Council and approved in writing of the external noise
level emitted from the proposed plant machinery/equipment and mitigation
measures as appropriate. The measures shall ensure that the external noise level
emitted from plant, machinery or equipment at the development hereby approved
shall be lower than the lowest existing background noise level by at least 10 dBA,
as assessed according to BS4142:1997 at the nearest and/or most affected noise
sensitive premises, with all machinery operating together at maximum capacity.
To ensure that the amenity of occupiers of surrounding premises is not adversely
affected by noise from mechanical installations/ equipment, in accordance with
Policies DM G1, DM G3 and DM G7 of the Development Management Local Plan.
7) Prior to first occupation of the relevant part of the development hereby approved,
details shall be submitted to and approved in writing by the Council of any external
lighting. Details shall demonstrate that the recommendations of the Institution of
Lighting Engineers in the `Guidance Notes For The Reduction Of Light Pollution
2005 will be met with regard to glare, sky glow and illuminance of neighbouring
facades. Approved details shall be implemented prior to occupation of the
development and thereafter be permanently retained.
To ensure that the amenity of occupiers adjacent to the development site and
surrounding premises are not adversely affected by lighting, in accordance with