REMOTE AND COIL DETECTOR USER MANUAL - noimmo
REMOTE AND COIL DETECTOR USER MANUAL - noimmo
REMOTE AND COIL DETECTOR USER MANUAL - noimmo
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>REMOTE</strong> <strong>AND</strong> <strong>COIL</strong><br />
<strong>DETECTOR</strong><br />
<strong>USER</strong> <strong>MANUAL</strong>
Functions:<br />
1. IMMO coil operation checking.<br />
2. Radio Frequency remote control operation checking.<br />
3. Infra Red remote control operation checking.<br />
Operations guide.<br />
1. Press “Power” button. Red LED should be light. Place this<br />
device near the ignition lock (1-3 centimeters far from it) and<br />
turn ignition ON. If IMMO coil is OK you could see green LED<br />
“OK” is flash and buzzer voice had heard.<br />
2. Press “Power” button. Red LED should be light. Place a<br />
Radio Frequency remote control near the device like shown on<br />
the picture. Press any key on the remote control. If it operates<br />
OK “radio” LED should flash and buzzer voice had heard.<br />
3. Press “Power” button. Red LED should be light. Place<br />
an Infrared remote control near the device like shown on the<br />
picture. Press any key on the remote control. If it operates OK<br />
“infrared” LED should flash and buzzer voice had heard.