Productlist 2007

PRODUCT LIST
Vacon Plc
VACON NX_ Runsorintie 7
65380 VAASA
FINLAND
Tel.: +358 (0)201 212 000
Fax: +358 (0)201 212 205
http://www.vacon.com
VACON NX PRODUCT LIST 2007 BC00118 VER C
Updated 8.2.2007
This productlist includes products which are not released to production or sales

Vacon Plc
VACON PLC
AC drive 8.2.2007
TABLE OF CONTENTS
NX Air cooled products:
PAGE
NXL 208-240 V and 380-500 V:
Vacon NXL 380-500 V, IP20 (cabinet assembly), EMC level N, air-cooled AC drive 1
Vacon NXL 208-240 V, IP20 (cabinet assembly), EMC level N, air-cooled AC drive 1
Vacon NXL 380-500 V, IP21, EMC level H/T, air-cooled AC drive 2
Vacon NXL 380-500 V, IP54, EMC level H/T, air-cooled AC drive 2
NXS 208-240 V:
Vacon NXS 208-240 V, IP21, EMC level H/T, air-cooled AC drive 3
Vacon NXS 208-240 V, IP54, EMC level H/T, air-cooled AC drive 4
NXS 380-500 V:
Vacon NXS 380-500 V, IP21, EMC level H/T, air-cooled AC drive 5
Vacon NXS 380-500 V, IP54, EMC level H/T, air-cooled AC drive 6
NXS 525-690 V:
Vacon NXS 525-690 V, IP21, EMC level L/T, air-cooled AC drive 7
Vacon NXS 525-690 V, IP54, EMC level L/T, air-cooled AC drive 8
NXS Stand Alone:
Vacon NXS 380-500 V, IP21, EMC level L/T, air-cooled standalone AC drive 9
Vacon NX_ OPTIONS Integrated load switch for standalone 9
Vacon NXS 380-500 V, IP54, EMC level L/T, air-cooled standalone AC drive 10
Vacon NX_ OPTIONS Integrated load switch for standalone 10
Vacon NXS 525-690 V, IP21, EMC level L/T, air-cooled standalone AC drive 11
Vacon NX_ OPTIONS Integrated load switch for standalone 11
Vacon NXS 525-690 V, IP54, EMC level L/T, air-cooled standalone AC drive 12
Vacon NX_ OPTIONS Integrated load switch for standalone 12
NXP 208-240 V:
Vacon NXP 208-240 V, IP21, EMC level H/T, air-cooled AC drive 13
Vacon NXP 208-240 V, IP54, EMC level H/T, air-cooled AC drive 14
NXP 380-500 V:
Vacon NXP 380-500 V, IP21, EMC level H/T, air-cooled AC drive 15
Vacon NXP 380-500 V, IP54, EMC level H/T, air-cooled AC drive 16
Vacon NXP 380-500 V, IP00, EMC level N/T, air-cooled AC drive module, 6-pulse supply 17
Vacon NXP 380-500 V, IP00, EMC level N/T, air-cooled AC drive module, 12-pulse supply 18
NXP 525-690 V:
Vacon NXP 525-690 V, IP21, EMC level L/T, air-cooled AC drive 19
Vacon NXP 525-690 V, IP54, EMC level L/T, air-cooled AC drive 20
Vacon NXP 525-690 V, IP00, EMC level N/T, air-cooled AC drive module, 6-pulse supply 21
Vacon NXP 525-690 V, IP00, EMC level N/T, air-cooled AC drive module, 12-pulse supply 22
NXP Stand Alone:
Vacon NXP 380-500 V, IP21, EMC level L/T, air-cooled standalone AC drive 23
Vacon NX_ OPTIONS Integrated load switch for standalone 23
Vacon NXP 380-500 V, IP54, EMC level L/T, air-cooled standalone AC drive 24
Vacon NX_ OPTIONS Integrated load switch for standalone 24
Vacon NXP 525-690 V, IP21, EMC level L/T, air-cooled standalone AC drive 25
Vacon NX_ OPTIONS Integrated load switch for standalone 25
Vacon NXP 525-690 V, IP54, EMC level L/T, air-cooled standalone AC drive 26
Vacon NX_ OPTIONS Integrated load switch for standalone 26
CONDITIONS
PRICE = FCA VAASA, FINLAND (INCOTERMS 2000)
PRICES ARE VALID FROM 1.3.2007 UNTIL 31.12.2007; PRICES DO NOT INCLUDE ANY TAXES OR SIMILAR CHARGES
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com

Vacon Plc
VACON PLC
AC drive 8.2.2007
TABLE OF CONTENTS
PAGE
NX_ OPTIONS:
Vacon NX_ OPTIONS Internal rake choppers 27
Vacon NX_ OPTIONS DC-connection (FR8-FR11) 28
Vacon NX_ OPTIONS Internal brake resistors 28
Vacon NX_ OPTIONS External brake resistors 29
Vacon NX_ OPTIONS Overtemperature sensors 29
Vacon NX_OPTIONS External du/dt filters 380-690 V 30
Vacon NX_OPTIONS External sine wave filters 380-500 V and 525-690 V 30
Vacon NX_ OPTIONS External filters for NXL 31
Vacon NX_ OPTIONS External RFI filters 31
Vacon NX_OPTIONS External RFI filters for NX 31
Vacon NX_OPTIONS Integrated RFI filter options 31
Vacon NX_ OPTIONS Enclosure kits 32
Vacon NX_ OPTIONS Through hole mounting 32
Vacon NX_OPTIONS Through hole mounting kits IP21 32
Vacon NX_OPTIONS Through hole mounting kits IP54 32
Vacon NX_ OPTIONS FR9 floor assembly option 32
Vacon NX_ OPTIONS Display panels, Door installation sets, RS232 cables, Fiber optic cables, Ferrite rings 33
Vacon NX_ OPTIONS Control unit enclosures for NXP 33
Vacon NX_ OPTIONS I/O cards 34
Vacon NX_ OPTIONS I/O cards reduction price 34
Vacon NX_ OPTIONS I/O cards varnished 34
Vacon NX_OPTIONS Software tools 35
Vacon NX_OPTIONS Application Softwares 35
Vacon NX_ OPTIONS Other options (Demo cases, Varnished PCB's, DIN rail assembly optionss) 35
Vacon NX_OPTIONS Other material 35
Vacon NXC 380-500 V, 6-pulse supply
Vacon NXC 380-500 V, 261 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 36
Vacon NXC 380-500 V, 300 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 37
Vacon NXC 380-500 V, 385 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 38
Vacon NXC 380-500 V, 460 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 39
Vacon NXC 380-500 V, 520 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 40
Vacon NXC 380-500 V, 590 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 41
Vacon NXC 380-500 V, 650 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 42
Vacon NXC 380-500 V, 730 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 43
Vacon NXC 380-500 V, 820 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 44
Vacon NXC 380-500 V, 920 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 45
Vacon NXC 380-500 V, 1030 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 46
Vacon NXC 380-500 V, 1150 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 47
Vacon NXC 380-500 V, 1300 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 48
Vacon NXC 380-500 V, 1450 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 49
Vacon NXC 380-500 V, 1770 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 50
Vacon NXC 380-500 V, 2150 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 51
Vacon NXC 380-500 V, 12-pulse supply
Vacon NXC 380-500 V, 385 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 52
Vacon NXC 380-500 V, 460 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 53
Vacon NXC 380-500 V, 520 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 54
Vacon NXC 380-500 V, 590 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 55
Vacon NXC 380-500 V, 650 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 56
Vacon NXC 380-500 V, 730 A, EMC level L/T, air-cooled AC drive,12-pulse supply 57
Vacon NXC 380-500 V, 820 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 58
Vacon NXC 380-500 V, 920 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 59
Vacon NXC 380-500 V, 1030 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 60
Vacon NXC 380-500 V, 1150 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 61
Vacon NXC 380-500 V, 1300 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 62
Vacon NXC 380-500 V, 1450 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 63
Vacon NXC 380-500 V, 1770 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 64
Vacon NXC 380-500 V, 2150 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 65
CONDITIONS
PRICE = FCA VAASA, FINLAND (INCOTERMS 2000)
PRICES ARE VALID FROM 1.3.2007 UNTIL 31.12.2007; PRICES DO NOT INCLUDE ANY TAXES OR SIMILAR CHARGES
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com

Vacon Plc
VACON PLC
AC drive 8.2.2007
TABLE OF CONTENTS
PAGE
Vacon NXC 525-690 V, 6-pulse supply:
Vacon NXC 525-690 V, 125 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 66
Vacon NXC 525-690 V, 144 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 67
Vacon NXC 525-690 V, 170 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 68
Vacon NXC 525-690 V, 208 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 69
Vacon NXC 525-690 V, 261 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 70
Vacon NXC 525-690 V, 325 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 71
Vacon NXC 525-690 V, 385 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 72
Vacon NXC 525-690 V, 416 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 73
Vacon NXC 525-690 V, 460 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 74
Vacon NXC 525-690 V, 502 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 75
Vacon NXC 525-690 V, 590 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 76
Vacon NXC 525-690 V, 650 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 77
Vacon NXC 525-690 V, 750 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 78
Vacon NXC 525-690 V, 820 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 79
Vacon NXC 525-690 V, 920 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 80
Vacon NXC 525-690 V, 1030 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 81
Vacon NXC 525-690 V, 1180 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 82
Vacon NXC 525-690 V, 1500 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 83
Vacon NXC 525-690 V, 1900 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 84
Vacon NXC 525-690 V, 2250 A, EMC level L/T, air-cooled AC drive, 6-pulse supply 85
Vacon NXC 525-690 V, 12-pulse supply:
Vacon NXC 525-690 V, 261 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 86
Vacon NXC 525-690 V, 325 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 87
Vacon NXC 525-690 V, 385 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 88
Vacon NXC 525-690 V, 416 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 89
Vacon NXC 525-690 V, 460 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 90
Vacon NXC 525-690 V, 502 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 91
Vacon NXC 525-690 V, 590 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 92
Vacon NXC 525-690 V, 650 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 93
Vacon NXC 525-690 V, 750 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 94
Vacon NXC 525-690 V, 820 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 95
Vacon NXC 525-690 V, 920 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 96
Vacon NXC 525-690 V, 1030 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 97
Vacon NXC 525-690 V, 1180 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 98
Vacon NXC 525-690 V, 1500 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 99
Vacon NXC 525-690 V, 1900 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 100
Vacon NXC 525-690 V, 2250 A, EMC level L/T, air-cooled AC drive, 12-pulse supply 101
Common Options for Vacon NXC 102
NXP liquid cooled:
Vacon NXP-line 400-500 VAC, IP00, EMC-level N/T, LIQUID COOLED FC, 6-P 103
Vacon NXP-line 400-500 VAC, IP00, EMC-level N/T, LIQUID COOLED FC, 12-P 104
Vacon NXP-line 465-800 VDC, IP00, EMC-level T, LIQUID COOLED INVERTER 105
Vacon NXP-line 525-690 VAC, IP00, EMC-level N/T, LIQUID COOLED FC, 6-P 106
Vacon NXP-line 525-690 VAC, IP00, EMC-level N/T, LIQUID COOLED FC, 12-P 106
Vacon NXP-line 640-1100 VDC, IP00, EMC-level T, LIQUID COOLED INVERTER 107
Vacon Liquid Cooled External Brake chopper units 465-800Vdc & 640-1100Vdc 108
Vacon Liquid Cooled Active Front Ends, Supply Units 465-800Vdc & 640-1100Vdc 109
Vacon Liquid Cooled OPTIONS 110
NX Common DC products:
Vacon NXI-line 380-500 V, IP00, EMC-level T, AIR-COOLED INVERTER UNIT 113
Vacon NXI-line 525-690 V, IP00, EMC-level T, AIR-COOLED INVERTER UNIT 114
Vacon NXA-line 380-500 V, IP00, EMC-level T, AIR-COOLED ACTIVE FRONT-END (AFE) 114
Vacon OPTIONS, LCL filter for AIR-COOLED ACTIVE FRONT-END (AFE) 115
Vacon NXF-line 380-500 V, IP00, EMC-level T, AIR-COOLED FFE UNIT 116
Vacon NXB-line 380-500 V, IP00, EMC-level T, AIR-COOLED INVERTER UNIT 117
Vacon NXB-line 525-690 V, IP00, EMC-level T, AIR-COOLED INVERTER UNIT 118
Type designations codes:
Type designation code for Vacon NXL MF2-MF3 119
Type designation code for Vacon NXL MF4-MF6 120
Type designation code for Vacon NX FR4-FR9 121
Type designation code for Vacon NXP and Vacon NXC FR10-FR13 122
Type designation codes for liquid cooled NX products and Heat exchangers 123
Type designation codes for Common DC products 125
Type designation codes for LCL filters 126
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com

Vacon Plc
AC drive
VACON PLC
Vacon NXL 380-500 V, IP20 (cabinet assembly), EMC level N, air-cooled AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXL00015C1N0SSS 0,37 1,3 2 0,55 1,9 MF2/IP20 60x130x150 1
NXL00025C1N0SSS 0,55 1,9 2,9 0,75 2,4 MF2/IP20 60x130x150 1
NXL00035C1N1SSS 0,75 2,4 3,6 1,1 3,3 MF3/IP20 84x220x172 2
NXL00045C1N1SSS 1,1 3,3 5 1,5 4,3 MF3/IP20 84x220x172 2
NXL00055C1N1SSS 1,5 4,3 6,5 2,2 5,4 MF3/IP20 84x220x172 2
Vacon NXL 208-240 V, IP20 (cabinet assembly), EMC level N, air-cooled AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXL00022C1N0SSS 0,25 1,7 2,6 0,37 2,4 MF2/IP20 60x130x150 1
NXL00032C1N1SSS 0,55 2,8 4,2 0,75 3,7 MF3/IP20 84x220x172 2
NXL00042C1N1SSS 0,75 3,7 5,6 1,1 4,8 MF3/IP20 84x220x172 2
NXL00062C1N1SSS 1,1 4,8 7,2 1,5 6,6 MF3/IP20 84x220x172 2
NXL00022C1N0SSS: SINGLE PHASE SUPPLY ONLY
NXL00032C1N1SSS - NXL00062C1N1SSS: BOTH SINGLE AND THREE PHASE SUPPLY POSSIBLE
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 1

Vacon Plc
AC drive
VACON PLC
Vacon NXL 380-500 V, IP21, EMC level H, air-cooled AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXL00035C2H1SSS 0,75 2,2 3,3 1,1 3,3 MF4/IP21 128x292x190 5
NXL00045C2H1SSS 1,1 3,3 5 1,5 4,3 MF4/IP21 128x292x190 5
NXL00055C2H1SSS 1,5 4,3 6,5 2,2 5,6 MF4/IP21 128x292x190 5
NXL00075C2H1SSS 2,2 5,6 8,4 3 7,6 MF4/IP21 128x292x190 5
NXL00095C2H1SSS 3 7,6 11,4 4 9 MF4/IP21 128x292x190 5
NXL00125C2H1SSS 4 9 13,5 5,5 12 MF4/IP21 128x292x190 5
NXL00165C2H1SSS 5,5 12 18 7,5 16 MF5/IP21 144x391x214 8,1
NXL00235C2H1SSS 7,5 16 24 11 23 MF5/IP21 144x391x214 8,1
NXL00315C2H1SSS 11 23 35 15 31 MF5/IP21 144x391x214 8,1
NXL00385C2H1SSS 15 31 47 18,5 38 MF6/IP21 195x519x237 18,5
NXL00465C2H1SSS 18,5 38 57 22 46 MF6/IP21 195x519x237 18,5
NXL00615C2H1SSS 22 46 69 30 61 MF6/IP21 195x519x237 18,5
Vacon NXL 380-500 V, IP54, EMC level H, air-cooled AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXL00035C5H1SSS 0,75 2,2 3,3 1,1 3,3 MF4/IP54 128x292x190 5
NXL00045C5H1SSS 1,1 3,3 5 1,5 4,3 MF4/IP54 128x292x190 5
NXL00055C5H1SSS 1,5 4,3 6,5 2,2 5,6 MF4/IP54 128x292x190 5
NXL00075C5H1SSS 2,2 5,6 8,4 3 7,6 MF4/IP54 128x292x190 5
NXL00095C5H1SSS 3 7,6 11,4 4 9 MF4/IP54 128x292x190 5
NXL00125C5H1SSS 4 9 13,5 5,5 12 MF4/IP54 128x292x190 5
NXL00165C5H1SSS 5,5 12 18 7,5 16 MF5/IP54 144x391x214 8,1
NXL00235C5H1SSS 7,5 16 24 11 23 MF5/IP54 144x391x214 8,1
NXL00315C5H1SSS 11 23 35 15 31 MF5/IP54 144x391x214 8,1
NXL00385C5H1SSS 15 31 47 18,5 38 MF6/IP54 195x519x237 18,5
NXL00465C5H1SSS 18,5 38 57 22 46 MF6/IP54 195x519x237 18,5
NXL00615C5H1SSS 22 46 69 30 61 MF6/IP54 195x519x237 18,5
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXL 380-500 V, IP21 and IP54, EMC level T, air-cooled AC drive
The prices are the same as H level ones.
Replace the H by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 2

Vacon Plc
AC drive
VACON PLC
Vacon NXS 208-240 V (3 phase supply), IP21, EMC level H, air-cooled AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXS00042A2H1SSSA1A2 0,55 3,7 5,6 0,75 4,8 FR4/IP21 128x292x190 5
NXS00072A2H1SSSA1A2 0,75 4,8 7,2 1,1 6,6 FR4/IP21 128x292x190 5
NXS00082A2H1SSSA1A2 1,1 6,6 9,9 1,5 7,8 FR4/IP21 128x292x190 5
NXS00112A2H1SSSA1A2 1,5 7,8 11,7 2,2 11 FR4/IP21 128x292x190 5
NXS00122A2H1SSSA1A2 2,2 11 16,5 3 12,5 FR4/IP21 128x292x190 5
NXS00172A2H1SSSA1A2 3 12,5 18,8 4 17,5 FR5/IP21 144x391x214 8,1
NXS00252A2H1SSSA1A2 4 17,5 26,3 5,5 25 FR5/IP21 144x391x214 8,1
NXS00312A2H1SSSA1A2 5,5 25 37,5 7,5 31 FR5/IP21 144x391x214 8,1
NXS00482A2H1SSSA1A2 7,5 31 46,5 11 48 FR6/IP21 195x519x237 18,5
NXS00612A2H1SSSA1A2 11 48 72,0 15 61 FR6/IP21 195x519x237 18,5
NXS00752A2H0SSSA1A2 15 61 91,5 18,5 75 FR7/IP21 237x591x257 35
NXS00882A2H0SSSA1A2 18,5 75 112,5 22 88 FR7/IP21 237x591x257 35
NXS01142A2H0SSSA1A2 22 88 132,0 30 114 FR7/IP21 237x591x257 35
NXS01402A2H0SSSA1A2 30 105 158 37 140 FR8/IP21 291x758x344 58
NXS01702A2H0SSSA1A2 37 140 210 45 170 FR8/IP21 291x758x344 58
NXS02052A2H0SSSA1A2 45 170 255 55 205 FR8/IP21 291x758x344 58
NXS02612A2H0SSFA1A2 55 205 308 75 261 FR9/IP21 480x1150x362 146
NXS03002A2H0SSFA1A2 75 245 368 90 300 FR9/IP21 480x1150x362 146
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXS 208-240 V, IP21, EMC level T, air-cooled AC drive
The prices are the same as H level ones.
Replace the H by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 3

Vacon Plc
AC drive
VACON PLC
Vacon NXS 208-240 V (3 phase supply), IP54, EMC level H, air-cooled AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXS00042A5H1SSSA1A2 0,55 3,7 5,6 0,75 4,8 FR4/IP54 128x292x190 5
NXS00072A5H1SSSA1A2 0,75 4,8 7,2 1,1 6,6 FR4/IP54 128x292x190 5
NXS00082A5H1SSSA1A2 1,1 6,6 9,9 1,5 7,8 FR4/IP54 128x292x190 5
NXS00112A5H1SSSA1A2 1,5 7,8 11,7 2,2 11 FR4/IP54 128x292x190 5
NXS00122A5H1SSSA1A2 2,2 11 16,5 3 12,5 FR4/IP54 128x292x190 5
NXS00172A5H1SSSA1A2 3 12,5 18,8 4 17,5 FR5/IP54 144x391x214 8,1
NXS00252A5H1SSSA1A2 4 17,5 26,3 5,5 25 FR5/IP54 144x391x214 8,1
NXS00312A5H1SSSA1A2 5,5 25 37,5 7,5 31 FR5/IP54 144x391x214 8,1
NXS00482A5H1SSSA1A2 7,5 31 46,5 11 48 FR6/IP54 195x519x237 18,5
NXS00612A5H1SSSA1A2 11 48 72,0 15 61 FR6/IP54 195x519x237 18,5
NXS00752A5H0SSSA1A2 15 61 91,5 18,5 75 FR7/IP54 237x591x257 35
NXS00882A5H0SSSA1A2 18,5 75 112,5 22 88 FR7/IP54 237x591x257 35
NXS01142A5H0SSSA1A2 22 88 132,0 30 114 FR7/IP54 237x591x257 35
NXS01402A5H0SSSA1A2 30 105 158 37 140 FR8/IP54 291x758x344 58
NXS01702A5H0SSSA1A2 37 140 210 45 170 FR8/IP54 291x758x344 58
NXS02052A5H0SSSA1A2 45 170 255 55 205 FR8/IP54 291x758x344 58
NXS02612A5H0SSFA1A2 55 205 308 75 261 FR9/IP54 480x1150x362 146
NXS03002A5H0SSFA1A2 75 245 368 90 300 FR9/IP54 480x1150x362 146
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXS 208-240 V, IP54, EMC level T, air-cooled AC drive
The prices are the same as H level ones.
Replace the H by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 4

Vacon Plc
AC drive
VACON PLC
Vacon NXS 380-500 V, IP21, EMC level H, air-cooled AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXS00035A2H1SSSA1A2 0,75 2,2 3,3 1,1 3,3 FR4/IP21 128x292x190 5
NXS00045A2H1SSSA1A2 1,1 3,3 5 1,5 4,3 FR4/IP21 128x292x190 5
NXS00055A2H1SSSA1A2 1,5 4,3 6,5 2,2 5,6 FR4/IP21 128x292x190 5
NXS00075A2H1SSSA1A2 2,2 5,6 8,4 3 7,6 FR4/IP21 128x292x190 5
NXS00095A2H1SSSA1A2 3 7,6 11,4 4 9 FR4/IP21 128x292x190 5
NXS00125A2H1SSSA1A2 4 9 13,5 5,5 12 FR4/IP21 128x292x190 5
NXS00165A2H1SSSA1A2 5,5 12 18 7,5 16 FR5/IP21 144x391x214 8,1
NXS00225A2H1SSSA1A2 7,5 16 24 11 23 FR5/IP21 144x391x214 8,1
NXS00315A2H1SSSA1A2 11 23 35 15 31 FR5/IP21 144x391x214 8,1
NXS00385A2H1SSSA1A2 15 31 47 18,5 38 FR6/IP21 195x519x237 18,5
NXS00455A2H1SSSA1A2 18,5 38 57 22 46 FR6/IP21 195x519x237 18,5
NXS00615A2H1SSSA1A2 22 46 69 30 61 FR6/IP21 195x519x237 18,5
NXS00725A2H0SSSA1A2 30 61 92 37 72 FR7/IP21 237x591x257 35
NXS00875A2H0SSSA1A2 37 72 108 45 87 FR7/IP21 237x591x257 35
NXS01055A2H0SSSA1A2 45 87 131 55 105 FR7/IP21 237x591x257 35
NXS01405A2H0SSSA1A2 55 105 158 75 140 FR8/IP21 291x758x344 58
NXS01685A2H0SSSA1A2 75 140 210 90 170 FR8/IP21 291x758x344 58
NXS02055A2H0SSSA1A2 90 170 255 110 205 FR8/IP21 291x758x344 58
NXS02615A2H0SSFA1A2 110 205 308 132 261 FR9/IP21 480x1150x362 146
NXS03005A2H0SSFA1A2 132 245 368 160 300 FR9/IP21 480x1150x362 146
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXS 380-500 V, IP21, EMC level T, air-cooled AC drive
The prices are the same as H level ones.
Replace the H by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 5

Vacon Plc
AC drive
VACON PLC
Vacon NXS 380-500 V, IP54, EMC level H, air-cooled AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXS00035A5H1SSSA1A2 0,75 2,2 3,3 1,1 3,3 FR4/IP54 128x292x190 5
NXS00045A5H1SSSA1A2 1,1 3,3 5 1,5 4,3 FR4/IP54 128x292x190 5
NXS00055A5H1SSSA1A2 1,5 4,3 6,5 2,2 5,6 FR4/IP54 128x292x190 5
NXS00075A5H1SSSA1A2 2,2 5,6 8,4 3 7,6 FR4/IP54 128x292x190 5
NXS00095A5H1SSSA1A2 3 7,6 11,4 4 9 FR4/IP54 128x292x190 5
NXS00125A5H1SSSA1A2 4 9 13,5 5,5 12 FR4/IP54 128x292x190 5
NXS00165A5H1SSSA1A2 5,5 12 18 7,5 16 FR5/IP54 144x391x214 8,1
NXS00225A5H1SSSA1A2 7,5 16 24 11 23 FR5/IP54 144x391x214 8,1
NXS00315A5H1SSSA1A2 11 23 35 15 31 FR5/IP54 144x391x214 8,1
NXS00385A5H1SSSA1A2 15 31 47 18,5 38 FR6/IP54 195x519x237 18,5
NXS00455A5H1SSSA1A2 18,5 38 57 22 46 FR6/IP54 195x519x237 18,5
NXS00615A5H1SSSA1A2 22 46 69 30 61 FR6/IP54 195x519x237 18,5
NXS00725A5H0SSSA1A2 30 61 92 37 72 FR7/IP54 237x591x257 35
NXS00875A5H0SSSA1A2 37 72 108 45 87 FR7/IP54 237x591x257 35
NXS01055A5H0SSSA1A2 45 87 131 55 105 FR7/IP54 237x591x257 35
NXS01405A5H0SSSA1A2 55 105 158 75 140 FR8/IP54 291x758x344 58
NXS01685A5H0SSSA1A2 75 140 210 90 170 FR8/IP54 291x758x344 58
NXS02055A5H0SSSA1A2 90 170 255 110 205 FR8/IP54 291x758x344 58
NXS02615A5H0SSFA1A2 110 205 308 132 261 FR9/IP54 480x1150x362 146
NXS03005A5H0SSFA1A2 132 245 368 160 300 FR9/IP54 480x1150x362 146
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXS 380-500 V, IP54, EMC level T, air-cooled AC drive
The prices are the same as H level ones.
Replace the H by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 6

Vacon Plc
AC drive
VACON PLC
Vacon NXS 525-690 V, IP21, EMC level L, air-cooled AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXS00046A2L0SSSA1A2 2,2 3,2 5,0 3 4,5 FR6/IP21 195x519x237 18,5
NXS00056A2L0SSSA1A2 3 4,5 6,8 4 5,5 FR6/IP21 195x519x237 18,5
NXS00076A2L0SSSA1A2 4 5,5 8,3 5,5 7,5 FR6/IP21 195x519x237 18,5
NXS00106A2L0SSSA1A2 5,5 7,5 11,3 7,5 10 FR6/IP21 195x519x237 18,5
NXS00136A2L0SSSA1A2 7,5 10 15 11 13,5 FR6/IP21 195x519x237 18,5
NXS00186A2L0SSSA1A2 11 13,5 20,3 15 18 FR6/IP21 195x519x237 18,5
NXS00226A2L0SSSA1A2 15 18 27,0 18,5 22 FR6/IP21 195x519x237 18,5
NXS00276A2L0SSSA1A2 18,5 22 33 22 27 FR6/IP21 195x519x237 18,5
NXS00346A2L0SSSA1A2 22 27 41 30 34 FR6/IP21 195x519x237 18,5
NXS00416A2L0SSSA1A2 30 34 51 37 41 FR7/IP21 237x591x257 35
NXS00526A2L0SSSA1A2 37 41 62 45 52 FR7/IP21 237x591x257 35
NXS00626A2L0SSSA1A2 45 52 78 55 62 FR8/IP21 291x758x344 58
NXS00806A2L0SSSA1A2 55 62 93 75 80 FR8/IP21 291x758x344 58
NXS01006A2L0SSSA1A2 75 80 120 90 100 FR8/IP21 291x758x344 58
NXS01256A2L0SSFA1A2 90 100 150 110 125 FR9/IP21 480x1150x362 146
NXS01446A2L0SSFA1A2 110 125 188 132 144 FR9/IP21 480x1150x362 146
NXS01706A2L0SSFA1A2 132 144 216 160 170 FR9/IP21 480x1150x362 146
NXS02086A2L0SSFA1A2 160 170 255 200 208 FR9/IP21 480x1150x362 146
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXS 525-690 V, IP21, EMC level T, air-cooled AC drive
The prices are the same as L level ones.
Replace the L by T in the Order Type Code
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 7

Vacon Plc
AC drive
VACON PLC
Vacon NXS 525-690 V, IP54, EMC level L, air-cooled AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXS00046A5L0SSSA1A2 2,2 3,2 5,0 3 4,5 FR6/IP54 195x519x237 18,5
NXS00056A5L0SSSA1A2 3 4,5 6,8 4 5,5 FR6/IP54 195x519x237 18,5
NXS00076A5L0SSSA1A2 4 5,5 8,3 5,5 7,5 FR6/IP54 195x519x237 18,5
NXS00106A5L0SSSA1A2 5,5 7,5 11,3 7,5 10 FR6/IP54 195x519x237 18,5
NXS00136A5L0SSSA1A2 7,5 10 15 11 13,5 FR6/IP54 195x519x237 18,5
NXS00186A5L0SSSA1A2 11 13,5 20,3 15 18 FR6/IP54 195x519x237 18,5
NXS00226A5L0SSSA1A2 15 18 27,0 18,5 22 FR6/IP54 195x519x237 18,5
NXS00276A5L0SSSA1A2 18,5 22 33 22 27 FR6/IP54 195x519x237 18,5
NXS00346A5L0SSSA1A2 22 27 41 30 34 FR6/IP54 195x519x237 18,5
NXS00416A5L0SSSA1A2 30 34 51 37 41 FR7/IP54 237x591x257 35
NXS00526A5L0SSSA1A2 37 41 62 45 52 FR7/IP54 237x591x257 35
NXS00626A5L0SSSA1A2 45 52 78 55 62 FR8/IP54 291x758x344 58
NXS00806A5L0SSSA1A2 55 62 93 75 80 FR8/IP54 291x758x344 58
NXS01006A5L0SSSA1A2 75 80 120 90 100 FR8/IP54 289x759x344 58
NXS01256A5L0SSFA1A2 90 100 150 110 125 FR9/IP54 480x1150x362 146
NXS01446A5L0SSFA1A2 110 125 188 132 144 FR9/IP54 480x1150x362 146
NXS01706A5L0SSFA1A2 132 144 216 160 170 FR9/IP54 480x1150x362 146
NXS02086A5L0SSFA1A2 160 170 255 200 208 FR9/IP54 480x1150x362 146
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXS 525-690 V, IP54, EMC level T, air-cooled AC drive
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 8

Vacon Plc
AC drive
VACON PLC
Vacon NXS 380-500 V, IP21, EMC level L, air-cooled standalone AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXS03855A2L0SSAA1A2 160 300 450 200 385 FR10/IP21 595x2018x602 340
NXS04605A2L0SSAA1A2 200 385 578 250 460 FR10/IP21 595x2018x602 340
NXS05205A2L0SSAA1A2 250 460 690 250 520 FR10/IP21 595x2018x602 340
NXS05905A2L0SSAA1A2 250 520 780 315 590 FR11/IP21 794x2018x602 470
NXS06505A2L0SSAA1A2 315 590 885 355 650 FR11/IP21 794x2018x602 470
NXS07305A2L0SSAA1A2 355 650 975 400 730 FR11/IP21 794x2018x602 470
Input fuses are included as standard
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
VACON NX_ OPTIONS Integrated load switch for standalone units
ORDER TYPE CODE SUITABILITY DESCRIPTION
NXS_________O__ FR10 standalone Integrated load switch for standalone
NXS_________O__ FR11 standalone Integrated load switch for standalone
Vacon NXS 380-500 V, IP21, EMC level T, air-cooled standalone AC drive
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 9

Vacon Plc
AC drive
VACON PLC
Vacon NXS 380-500 V, IP54, EMC level L, air-cooled standalone AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXS03855A5L0SSAA1A2 160 300 450 200 385 FR10/IP54 595x2018x602 340
NXS04605A5L0SSAA1A2 200 385 578 250 460 FR10/IP54 595x2018x602 340
NXS05205A5L0SSAA1A2 250 460 690 250 520 FR10/IP54 595x2018x602 340
Input fuses are included as standard
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
VACON NX_ OPTIONS Integrated load switch for standalone units
ORDER TYPE CODE SUITABILITY DESCRIPTION
NXS_________O__ NXS FR10 standalone Integrated load switch for standalone
Vacon NXS 380-500 V, IP54, EMC level T, air-cooled standalone AC drive
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 10

Vacon Plc
AC drive
VACON PLC
Vacon NXS 525-690 V, IP21, EMC level L, air-cooled standalone AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXS02616A2L0SSAA1A2 200 208 312 250 261 FR10/IP21 595x2020x602 340
NXS03256A2L0SSAA1A2 250 261 392 315 325 FR10/IP21 595x2020x602 340
NXS03856A2L0SSAA1A2 315 325 488 355 385 FR10/IP21 595x2020x602 340
NXS04166A2L0SSAA1A2 315 325 488 400 416 FR10/IP21 595x2020x602 340
NXS04606A2L0SSAA1A2 355 385 578 450 460 FR11/IP21 794x2018x602 400
NXS05026A2L0SSAA1A2 450 460 690 500 502 FR11/IP21 794x2018x602 400
NXS05906A2L0SSAA1A2 500 502 753 560 590 FR11/IP21 794x2018x602 470
Input fuses are included as standard
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
VACON NX_ OPTIONS Integrated load switch for standalone units
ORDER TYPE CODE SUITABILITY DESCRIPTION
NXS_________O__ FR10 standalone Integrated load switch for standalone
NXS_________O__ FR11 standalone Integrated load switch for standalone
Vacon NXS 525-690 V, IP21, EMC level T, air-cooled standalone AC drive
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 11

Vacon Plc
AC drive
VACON PLC
Vacon NXS 525-690 V, IP54, EMC level L, air-cooled standalone AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXS02616A5L0SSAA1A2 200 208 312 250 261 FR10/IP54 595x2020x602 340
NXS03256A5L0SSAA1A2 250 261 392 315 325 FR10/IP54 595x2020x602 340
NXS03856A5L0SSAA1A2 315 325 488 355 385 FR10/IP54 595x2020x602 340
NXS04166A5L0SSAA1A2 315 325 488 400 416 FR10/IP54 595x2020x602 340
Input fuses are included as standard
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
VACON NX_ OPTIONS Integrated load switch for standalone units
ORDER TYPE CODE SUITABILITY DESCRIPTION
NXS_________O__ FR10 standalone Integrated load switch for standalone
Vacon NXS 525-690 V, IP54, EMC level T, air-cooled standalone AC drive
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 12

Vacon Plc
AC drive
VACON PLC
Vacon NXP 208-240 V (3 phase supply), IP21, EMC level H, air-cooled AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXP00042A2H1SSSA1A2 0,55 3,7 5,6 0,75 4,8 FR4/IP21 128x292x190 5
NXP00072A2H1SSSA1A2 0,75 4,8 7,2 1,1 6,6 FR4/IP21 128x292x190 5
NXP00082A2H1SSSA1A2 1,1 6,6 9,9 1,5 7,8 FR4/IP21 128x292x190 5
NXP00112A2H1SSSA1A2 1,5 7,8 11,7 2,2 11 FR4/IP21 128x292x190 5
NXP00122A2H1SSSA1A2 2,2 11 16,5 3 12,5 FR4/IP21 128x292x190 5
NXP00172A2H1SSSA1A2 3 12,5 18,8 4 17,5 FR5/IP21 144x391x214 8,1
NXP00252A2H1SSSA1A2 4 17,5 26,3 5,5 25 FR5/IP21 144x391x214 8,1
NXP00312A2H1SSSA1A2 5,5 25 37,5 7,5 31 FR5/IP21 144x391x214 8,1
NXP00482A2H1SSSA1A2 7,5 31 46,5 11 48 FR6/IP21 195x519x237 18,5
NXP00612A2H1SSSA1A2 11 48 72,0 15 61 FR6/IP21 195x519x237 18,5
NXP00752A2H0SSSA1A2 15 61 91,5 18,5 75 FR7/IP21 237x591x257 35
NXP00882A2H0SSSA1A2 18,5 75 112,5 22 88 FR7/IP21 237x591x257 35
NXP01142A2H0SSSA1A2 22 88 132,0 30 114 FR7/IP21 237x591x257 35
NXP01402A2H0SSSA1A2 30 105 158 37 140 FR8/IP21 291x758x344 58
NXP01702A2H0SSSA1A2 37 140 210 45 170 FR8/IP21 291x758x344 58
NXP02052A2H0SSSA1A2 45 170 255 55 205 FR8/IP21 291x758x344 58
NXP02612A2H0SSFA1A2 55 205 308 75 261 FR9/IP21 480x1150x362 146
NXP03002A2H0SSFA1A2 75 245 368 90 300 FR9/IP21 480x1150x362 146
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXP 208-240 V, IP21, EMC level T, air-cooled AC drive
The prices are the same as H level ones.
Replace the H by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 13

Vacon Plc
AC drive
VACON PLC
Vacon NXP 208-240 V (3 phase supply), IP54, EMC level H, air-cooled AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXP00042A5H1SSSA1A2 0,55 3,7 5,6 0,75 4,8 FR4/IP54 128x292x190 5
NXP00072A5H1SSSA1A2 0,75 4,8 7,2 1,1 6,6 FR4/IP54 128x292x190 5
NXP00082A5H1SSSA1A2 1,1 6,6 9,9 1,5 7,8 FR4/IP54 128x292x190 5
NXP00112A5H1SSSA1A2 1,5 7,8 11,7 2,2 11 FR4/IP54 128x292x190 5
NXP00122A5H1SSSA1A2 2,2 11 16,5 3 12,5 FR4/IP54 128x292x190 5
NXP00172A5H1SSSA1A2 3 12,5 18,8 4 17,5 FR5/IP54 144x391x214 8,1
NXP00252A5H1SSSA1A2 4 17,5 26,3 5,5 25 FR5/IP54 144x391x214 8,1
NXP00312A5H1SSSA1A2 5,5 25 37,5 7,5 31 FR5/IP54 144x391x214 8,1
NXP00482A5H1SSSA1A2 7,5 31 46,5 11 48 FR6/IP54 195x519x237 18,5
NXP00612A5H1SSSA1A2 11 48 72,0 15 61 FR6/IP54 195x519x237 18,5
NXP00752A5H0SSSA1A2 15 61 91,5 18,5 75 FR7/IP54 237x591x257 35
NXP00882A5H0SSSA1A2 18,5 75 112,5 22 88 FR7/IP54 237x591x257 35
NXP01142A5H0SSSA1A2 22 88 132,0 30 114 FR7/IP54 237x591x257 35
NXP01402A5H0SSSA1A2 30 105 158 37 140 FR8/IP54 291x758x344 58
NXP01702A5H0SSSA1A2 37 140 210 45 170 FR8/IP54 291x758x344 58
NXP02052A5H0SSSA1A2 45 170 255 55 205 FR8/IP54 291x758x344 58
NXP02612A5H0SSFA1A2 55 205 308 75 261 FR9/IP54 480x1150x362 146
NXP03002A5H0SSFA1A2 75 245 368 90 300 FR9/IP54 480x1150x362 146
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXP 208-240 V, IP54, EMC level T, air-cooled AC drive
The prices are the same as H level ones.
Replace the H by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 14

Vacon Plc
AC drive
VACON PLC
Vacon NXP 380-500 V, IP21, EMC level H, air-cooled AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXP00035A2H1SSSA1A2 0,75 2,2 3,3 1,1 3,3 FR4/IP21 128x292x190 5
NXP00045A2H1SSSA1A2 1,1 3,3 5 1,5 4,3 FR4/IP21 128x292x190 5
NXP00055A2H1SSSA1A2 1,5 4,3 6,5 2,2 5,6 FR4/IP21 128x292x190 5
NXP00075A2H1SSSA1A2 2,2 5,6 8,4 3 7,6 FR4/IP21 128x292x190 5
NXP00095A2H1SSSA1A2 3 7,6 11,4 4 9 FR4/IP21 128x292x190 5
NXP00125A2H1SSSA1A2 4 9 13,5 5,5 12 FR4/IP21 128x292x190 5
NXP00165A2H1SSSA1A2 5,5 12 18 7,5 16 FR5/IP21 144x391x214 8,1
NXP00225A2H1SSSA1A2 7,5 16 24 11 23 FR5/IP21 144x391x214 8,1
NXP00315A2H1SSSA1A2 11 23 35 15 31 FR5/IP21 144x391x214 8,1
NXP00385A2H1SSSA1A2 15 31 47 18,5 38 FR6/IP21 195x519x237 18,5
NXP00455A2H1SSSA1A2 18,5 38 57 22 46 FR6/IP21 195x519x237 18,5
NXP00615A2H1SSSA1A2 22 46 69 30 61 FR6/IP21 195x519x237 18,5
NXP00725A2H0SSSA1A2 30 61 92 37 72 FR7/IP21 237x591x257 35
NXP00875A2H0SSSA1A2 37 72 108 45 87 FR7/IP21 237x591x257 35
NXP01055A2H0SSSA1A2 45 87 131 55 105 FR7/IP21 237x591x257 35
NXP01405A2H0SSSA1A2 55 105 158 75 140 FR8/IP21 291x758x344 58
NXP01685A2H0SSSA1A2 75 140 210 90 170 FR8/IP21 291x758x344 58
NXP02055A2H0SSSA1A2 90 170 255 110 205 FR8/IP21 291x758x344 58
NXP02615A2H0SSFA1A2 110 205 308 132 261 FR9/IP21 480x1150x362 146
NXP03005A2H0SSFA1A2 132 245 368 160 300 FR9/IP21 480x1150x362 146
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXP 380-500 V, IP21, EMC level T, air-cooled AC drive
The prices are the same as H level ones.
Replace the H by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 15

Vacon Plc
AC drive
VACON PLC
Vacon NXP 380-500 V, IP54, EMC level H, air-cooled AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXP00035A5H1SSSA1A2 0,75 2,2 3,3 1,1 3,3 FR4/IP54 128x292x190 5
NXP00045A5H1SSSA1A2 1,1 3,3 5 1,5 4,3 FR4/IP54 128x292x190 5
NXP00055A5H1SSSA1A2 1,5 4,3 6,5 2,2 5,6 FR4/IP54 128x292x190 5
NXP00075A5H1SSSA1A2 2,2 5,6 8,4 3 7,6 FR4/IP54 128x292x190 5
NXP00095A5H1SSSA1A2 3 7,6 11,4 4 9 FR4/IP54 128x292x190 5
NXP00125A5H1SSSA1A2 4 9 13,5 5,5 12 FR4/IP54 128x292x190 5
NXP00165A5H1SSSA1A2 5,5 12 18 7,5 16 FR5/IP54 144x391x214 8,1
NXP00225A5H1SSSA1A2 7,5 16 24 11 23 FR5/IP54 144x391x214 8,1
NXP00315A5H1SSSA1A2 11 23 35 15 31 FR5/IP54 144x391x214 8,1
NXP00385A5H1SSSA1A2 15 31 47 18,5 38 FR6/IP54 195x519x237 18,5
NXP00455A5H1SSSA1A2 18,5 38 57 22 46 FR6/IP54 195x519x237 18,5
NXP00615A5H1SSSA1A2 22 46 69 30 61 FR6/IP54 195x519x237 18,5
NXP00725A5H0SSSA1A2 30 61 92 37 72 FR7/IP54 237x591x257 35
NXP00875A5H0SSSA1A2 37 72 108 45 87 FR7/IP54 237x591x257 35
NXP01055A5H0SSSA1A2 45 87 131 55 105 FR7/IP54 237x591x257 35
NXP01405A5H0SSSA1A2 55 105 158 75 140 FR8/IP54 291x758x344 58
NXP01685A5H0SSSA1A2 75 140 210 90 170 FR8/IP54 291x758x344 58
NXP02055A5H0SSSA1A2 90 170 255 110 205 FR8/IP54 291x758x344 58
NXP02615A5H0SSFA1A2 110 205 308 132 261 FR9/IP54 480x1150x362 146
NXP03005A5H0SSFA1A2 132 245 368 160 300 FR9/IP54 480x1150x362 146
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXP 380-500 V, IP54, EMC level T, air-cooled AC drive
The prices are the same as H level ones.
Replace the H by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 16

Vacon Plc
AC drive
VACON PLC
Vacon NXP 380-500 V, IP00, EMC level N, air-cooled AC drive module, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXP03855A0N0SSAA1A2 160 300 450 200 385 FR10/IP00 500x1165x506 207*
NXP04605A0N0SSAA1A2 200 385 578 250 460 FR10/IP00 500x1165x506 238*
NXP05205A0N0SSAA1A2 250 460 690 250 520 FR10/IP00 500x1165x506 238*
NXP05905A0N0SSAA1A2 250 520 780 315 590 FR11/IP00 709x1206x503 378*
NXP06505A0N0SSAA1A2 315 590 885 355 650 FR11/IP00 709x1206x503 378*
NXP07305A0N0SSAA1A2 355 650 975 400 730 FR11/IP00 709x1206x503 378*
NXP08205A0N0SSAA1A2 400 730 1095 450 820 FR12/IP00 2x(500x1165x506) 414*
NXP09205A0N0SSAA1A2 450 820 1230 500 920 FR12/IP00 2x(500x1165x506) 476*
NXP10305A0N0SSAA1A2 500 920 1380 560 1030 FR12/IP00 2x(500x1165x506) 476*
NXP11505A0N0SSFA1A2 560 1030 1545 630 1150 FR13/IP00 2x(239x1030x372)+(708x1032x553) 700*
NXP13005A0N0SSFA1A2 630 1150 1725 710 1300 FR13/IP00 3x(239x1030x372)+(708x1032x553) 852*
NXP14505A0N0SSFA1A2 710 1300 1950 800 1450 FR13/IP00 3x(239x1030x372)+(708x1032x553) 852*
NXP17705A0N0SSFA1A2 900 1600 2400 1000 1770 FR14/IP00 4x(239x1030x372)+2x(708x1032x553) 995*
NXP21505A0N0SSFA1A2 1100 1940 2910 1200 2150 FR14/IP00 4x(239x1030x372)+2x(708x1032x553) 1010*
*INCLUDES WEIGHT OF INPUT CHOKE
PRICE INCLUDES THE AC CHOKE
INPUT CHOKE DELIVERED AS LOOSE COMPONENT (NOT INCLUDED IN DIMENSIONS)
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXP 380-500 V, IP00, EMC level T, air-cooled AC drive module, 6-pulse supply
The prices are the same as N level ones.
Replace the N by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 17

Vacon Plc
AC drive
VACON PLC
Vacon NXP 380-500 V, IP00, EMC level N, air-cooled AC drive module, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXP03855A0N0TSAA1A2 160 300 450 200 385 FR10/IP00 500x1165x506 207*
NXP04605A0N0TSAA1A2 200 385 578 250 460 FR10/IP00 500x1165x506 238*
NXP05205A0N0TSAA1A2 250 460 690 250 520 FR10/IP00 500x1165x506 238*
NXP05905A0N0TSAA1A2 250 520 780 315 590 FR11/IP00 709x1206x503 378*
NXP06505A0N0TSAA1A2 315 590 885 355 650 FR11/IP00 709x1206x503 378*
NXP07305A0N0TSAA1A2 355 650 975 400 730 FR11/IP00 709x1206x503 378*
NXP08205A0N0TSAA1A2 400 730 1095 450 820 FR12/IP00 2x(500x1165x506) 414*
NXP09205A0N0TSAA1A2 450 820 1230 500 920 FR12/IP00 2x(500x1165x506) 476*
NXP10305A0N0TSAA1A2 500 920 1380 560 1030 FR12/IP00 2x(500x1165x506) 476*
NXP11505A0N0TSFA1A2 560 1030 1545 630 1150 FR13/IP00 2x(239x1030x372)+(708x1032x553) 700*
NXP13005A0N0TSFA1A2 630 1150 1725 710 1300 FR13/IP00 4x(239x1030x372)+(708x1032x553) 852*
NXP14505A0N0TSFA1A2 710 1300 1950 800 1450 FR13/IP00 4x(239x1030x372)+(708x1032x553) 852*
NXP17705A0N0TSFA1A2 900 1600 2400 1000 1770 FR14/IP00 4x(239x1030x372)+2x(708x1032x553) 995*
NXP21505A0N0TSFA1A2 1100 1940 2910 1200 2150 FR14/IP00 4x(239x1030x372)+2x(708x1032x553) 1010*
*INCLUDES WEIGHT OF INPUT CHOKE
PRICE INCLUDES THE AC CHOKE
INPUT CHOKE DELIVERED AS LOOSE COMPONENT (NOT INCLUDED IN DIMENSIONS)
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXP 380-500 V, IP00, EMC level T, air-cooled AC drive module, 12-pulse supply
The prices are the same as N level ones.
Replace the N by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 18

Vacon Plc
AC drive
VACON PLC
Vacon NXP 525-690 V, IP21, EMC level L, air-cooled AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXP00046A2L0SSSA1A2 2,2 3,2 5,0 3 4,5 FR6/IP21 195x519x237 18,5
NXP00056A2L0SSSA1A2 3 4,5 6,8 4 5,5 FR6/IP21 195x519x237 18,5
NXP00076A2L0SSSA1A2 4 5,5 8,3 5,5 7,5 FR6/IP21 195x519x237 18,5
NXP00106A2L0SSSA1A2 5,5 7,5 11,3 7,5 10 FR6/IP21 195x519x237 18,5
NXP00136A2L0SSSA1A2 7,5 10 15 11 13,5 FR6/IP21 195x519x237 18,5
NXP00186A2L0SSSA1A2 11 13,5 20,3 15 18 FR6/IP21 195x519x237 18,5
NXP00226A2L0SSSA1A2 15 18 27,0 18,5 22 FR6/IP21 195x519x237 18,5
NXP00276A2L0SSSA1A2 18,5 22 33 22 27 FR6/IP21 195x519x237 18,5
NXP00346A2L0SSSA1A2 22 27 41 30 34 FR6/IP21 195x519x237 18,5
NXP00416A2L0SSSA1A2 30 34 51 37 41 FR7/IP21 237x591x257 35
NXP00526A2L0SSSA1A2 37 41 62 45 52 FR7/IP21 237x591x257 35
NXP00626A2L0SSSA1A2 45 52 78 55 62 FR8/IP21 291x758x344 58
NXP00806A2L0SSSA1A2 55 62 93 75 80 FR8/IP21 291x758x344 58
NXP01006A2L0SSSA1A2 75 80 120 90 100 FR8/IP21 291x758x344 58
NXP01256A2L0SSFA1A2 90 100 150 110 125 FR9/IP21 480x1150x362 146
NXP01446A2L0SSFA1A2 110 125 188 132 144 FR9/IP21 480x1150x362 146
NXP01706A2L0SSFA1A2 132 144 216 160 170 FR9/IP21 480x1150x362 146
NXP02086A2L0SSFA1A2 160 170 255 200 208 FR9/IP21 480x1150x362 146
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXP 525-690 V, IP21, EMC level T, air-cooled AC drive
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 19

Vacon Plc
AC drive
VACON PLC
Vacon NXP 525-690 V, IP54, EMC level L, air-cooled AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXP00046A5L0SSSA1A2 2,2 3,2 5,0 3 4,5 FR6/IP54 195x519x237 18,5
NXP00056A5L0SSSA1A2 3 4,5 6,8 4 5,5 FR6/IP54 195x519x237 18,5
NXP00076A5L0SSSA1A2 4 5,5 8,3 5,5 7,5 FR6/IP54 195x519x237 18,5
NXP00106A5L0SSSA1A2 5,5 7,5 11,3 7,5 10 FR6/IP54 195x519x237 18,5
NXP00136A5L0SSSA1A2 7,5 10 15 11 13,5 FR6/IP54 195x519x237 18,5
NXP00186A5L0SSSA1A2 11 13,5 20,3 15 18 FR6/IP54 195x519x237 18,5
NXP00226A5L0SSSA1A2 15 18 27,0 18,5 22 FR6/IP54 195x519x237 18,5
NXP00276A5L0SSSA1A2 18,5 22 33 22 27 FR6/IP54 195x519x237 18,5
NXP00346A5L0SSSA1A2 22 27 41 30 34 FR6/IP54 195x519x237 18,5
NXP00416A5L0SSSA1A2 30 34 51 37 41 FR7/IP54 237x591x257 35
NXP00526A5L0SSSA1A2 37 41 62 45 52 FR7/IP54 237x591x257 35
NXP00626A5L0SSSA1A2 45 52 78 55 62 FR8/IP54 291x758x344 58
NXP00806A5L0SSSA1A2 55 62 93 75 80 FR8/IP54 291x758x344 58
NXP01006A5L0SSSA1A2 75 80 120 90 100 FR8/IP54 291x758x344 58
NXP01256A5L0SSFA1A2 90 100 150 110 125 FR9/IP54 480x1150x362 146
NXP01446A5L0SSFA1A2 110 125 188 132 144 FR9/IP54 480x1150x362 146
NXP01706A5L0SSFA1A2 132 144 216 160 170 FR9/IP54 480x1150x362 146
NXP02086A5L0SSFA1A2 160 170 255 200 208 FR9/IP54 480x1150x362 146
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXP 525-690 V, IP54, EMC level T, air-cooled AC drive
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 20

Vacon Plc
AC drive
VACON PLC
Vacon NXP 525-690 V, IP00, EMC level N, air-cooled AC drive module, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXP02616A0N0SSAA1A2 200 208 312 250 261 FR10/IP00 500x1165x506 176**
NXP03256A0N0SSAA1A2 250 261 392 315 325 FR10/IP00 500x1165x506 207**
NXP03856A0N0SSAA1A2 315 325 488 355 385 FR10/IP00 500x1165x506 207**
NXP04166A0N0SSAA1A2 * 315 325 488 400 416 FR10/IP00 500x1165x506 207**
NXP04606A0N0SSAA1A2 355 385 578 450 460 FR11/IP00 709x1206x503 325**
NXP05026A0N0SSAA1A2 450 460 690 500 502 FR11/IP00 709x1206x503 325**
NXP05906A0N0SSAA1A2 * 500 502 753 560 590 FR11/IP00 709x1206x503 378**
NXP06506A0N0SSAA1A2 560 590 885 630 650 FR12/IP00 2x(500x1165x506) 414**
NXP07506A0N0SSAA1A2 630 650 975 710 750 FR12/IP00 2x(500x1165x506) 414**
NXP08206A0N0SSAA1A2 * 710 750 975 800 820 FR12/IP00 2x(500x1165x506) 414**
NXP09206A0N0SSFA1A2 800 820 1230 900 920 FR13/IP00 2x(239x1030x372)+(708x1032x553) 670**
NXP10306A0N0SSFA1A2 900 920 1380 1000 1030 FR13/IP00 2x(239x1030x372)+(708x1032x553) 670**
NXP11806A0N0SSFA1A2 * 1000 1030 1463 1150 1180 FR13/IP00 2x(239x1030x372)+(708x1032x553) 700**
NXP15006A0N0SSFA1A2 1300 1300 1950 1500 1500 FR14/IP00 3x(239x1030x372)+2x(708x1032x553) 925**
NXP19006A0N0SSFA1A2 1500 1500 2250 1800 1900 FR14/IP00 4x(239x1030x372)+2x(708x1032x553) 995**
NXP22506A0N0SSFA1A2 * 1800 1900 2782 2000 2250 FR14/IP00 4x(239x1030x372)+2x(708x1032x553) 1010**
* max. 35 C ambient temperature
**INCLUDES WEIGHT OF INPUT CHOKE
PRICE INCLUDES THE AC CHOKE
INPUT CHOKE DELIVERED AS LOOSE COMPONENT (NOT INCLUDED IN DIMENSIONS)
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXP 525-690 V, IP00, EMC level T, air-cooled AC drive module, 6-pulse supply
The prices are the same as N level ones.
Replace the N by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 21

Vacon Plc
AC drive
VACON PLC
Vacon NXP 525-690 V, IP00, EMC level N, air-cooled AC drive module, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXP02616A0N0TSAA1A2 200 208 312 250 261 FR10/IP00 500x1165x506 176**
NXP03256A0N0TSAA1A2 250 261 392 315 325 FR10/IP00 500x1165x506 207**
NXP03856A0N0TSAA1A2 315 325 488 355 385 FR10/IP00 500x1165x506 207**
NXP04166A0N0TSAA1A2 * 315 325 488 400 416 FR10/IP00 500x1165x506 207**
NXP04606A0N0TSAA1A2 355 385 578 450 460 FR11/IP00 709x1206x503 325**
NXP05026A0N0TSAA1A2 450 460 690 500 502 FR11/IP00 709x1206x503 325**
NXP05906A0N0TSAA1A2 * 500 502 753 560 590 FR11/IP00 709x1206x503 378**
NXP06506A0N0TSAA1A2 560 590 885 630 650 FR12/IP00 2x(500x1165x506) 414**
NXP07506A0N0TSAA1A2 630 650 975 710 750 FR12/IP00 2x(500x1165x506) 414**
NXP08206A0N0TSAA1A2 * 710 750 975 800 820 FR12/IP00 2x(500x1165x506) 414**
NXP09206A0N0TSFA1A2 800 820 1230 900 920 FR13/IP00 2x(239x1030x372)+(708x1032x553) 670**
NXP10306A0N0TSFA1A2 900 920 1380 1000 1030 FR13/IP00 2x(239x1030x372)+(708x1032x553) 670**
NXP11806A0N0TSFA1A2 * 1000 1030 1463 1150 1180 FR13/IP00 2x(239x1030x372)+(708x1032x553) 700**
NXP15006A0N0TSFA1A2 1300 1300 1950 1500 1500 FR14/IP00 4x(239x1030x372)+2x(708x1032x553) 925**
NXP19006A0N0TSFA1A2 1500 1500 2250 1800 1900 FR14/IP00 4x(239x1030x372)+2x(708x1032x553) 995**
NXP22506A0N0TSFA1A2 * 1800 1900 2782 2000 2250 FR14/IP00 4x(239x1030x372)+2x(708x1032x553) 1010**
* max. 35 C ambient temperature
**INCLUDES WEIGHT OF INPUT CHOKE
PRICE INCLUDES THE AC CHOKE
INPUT CHOKE DELIVERED AS LOOSE COMPONENT (NOT INCLUDED IN DIMENSIONS)
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXP 525-690 V, IP00, EMC level T, air-cooled AC drive module, 12-pulse supply
The prices are the same as N level ones.
Replace the N by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 22

Vacon Plc
AC drive
VACON PLC
Vacon NXP 380-500 V, IP21, EMC level L, air-cooled standalone AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXP03855A2L0SSAA1A2 160 300 450 200 385 FR10/IP21 595x2018x602 340
NXP04605A2L0SSAA1A2 200 385 578 250 460 FR10/IP21 595x2018x602 340
NXP05205A2L0SSAA1A2 250 460 690 250 520 FR10/IP21 595x2018x602 340
NXP05905A2L0SSAA1A2 250 520 780 315 590 FR11/IP21 794x2018x602 470
NXP06505A2L0SSAA1A2 315 590 885 355 650 FR11/IP21 794x2018x602 470
NXP07305A2L0SSAA1A2 355 650 975 400 730 FR11/IP21 794x2018x602 470
Input fuses are included as standard
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
VACON NX_ OPTIONS Integrated load switch for standalone units
ORDER TYPE CODE SUITABILITY DESCRIPTION
NXP_________O__ NXP FR10 standalone Integrated load switch for standalone
NXP_________O__ NXP FR11 standalone Integrated load switch for standalone
Vacon NXP 380-500 V, IP21, EMC level T, air-cooled standalone AC drive
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 23

Vacon Plc
AC drive
VACON PLC
Vacon NXP 380-500 V, IP54, EMC level L, air-cooled standalone AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXP03855A5L0SSAA1A2 160 300 450 200 385 FR10/IP54 595x2018x602 340
NXP04605A5L0SSAA1A2 200 385 578 250 460 FR10/IP54 595x2018x602 340
NXP05205A5L0SSAA1A2 250 460 690 250 520 FR10/IP54 595x2018x602 340
Input fuses are included as standard
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
VACON NX_ OPTIONS Integrated load switch for standalone units
ORDER TYPE CODE SUITABILITY DESCRIPTION
NXP_________O__ NXP FR10 standalone Integrated load switch for standalone
Vacon NXP 380-500 V, IP54, EMC level T, air-cooled standalone AC drive
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 24

Vacon Plc
AC drive
VACON PLC
Vacon NXP 525-690 V, IP21, EMC level L, air-cooled standalone AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXP02616A2L0SSAA1A2 200 208 312 250 261 FR10/IP21 595x2020x602 340
NXP03256A2L0SSAA1A2 250 261 392 315 325 FR10/IP21 595x2020x602 340
NXP03856A2L0SSAA1A2 315 325 488 355 385 FR10/IP21 595x2020x602 340
NXP04166A2L0SSAA1A2 315 325 488 400 416 FR10/IP21 595x2020x602 340
NXP04606A2L0SSAA1A2 355 385 578 450 460 FR11/IP21 794x2018x602 400
NXP05026A2L0SSAA1A2 450 460 690 500 502 FR11/IP21 794x2018x602 400
NXP05906A2L0SSAA1A2 500 502 753 560 590 FR11/IP21 794x2018x602 470
Input fuses are included as standard
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
VACON NX_ OPTIONS Integrated load switch for standalone units
ORDER TYPE CODE SUITABILITY DESCRIPTION
NXP_________O__ FR10 standalone Integrated load switch for standalone
NXP_________O__ FR11 standalone Integrated load switch for standalone
Vacon NXP 525-690 V, IP21, EMC level T, air-cooled standalone AC drive
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 25

Vacon Plc
AC drive
VACON PLC
Vacon NXP 525-690 V, IP54, EMC level L, air-cooled standalone AC drive
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXP02616A5L0SSAA1A2 200 208 312 250 261 FR10/IP54 595x2020x602 340
NXP03256A5L0SSAA1A2 250 261 392 315 325 FR10/IP54 595x2020x602 340
NXP03856A5L0SSAA1A2 315 325 488 355 385 FR10/IP54 595x2020x602 340
NXP04166A5L0SSAA1A2 315 325 488 400 416 FR10/IP54 595x2020x602 340
Input fuses are included as standard
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
VACON NX_ OPTIONS Integrated load switch for standalone units
ORDER TYPE CODE SUITABILITY DESCRIPTION
NXP_________O__ FR10 standalone Integrated load switch for standalone
Vacon NXP 525-690 V, IP54, EMC level T, air-cooled standalone AC drive
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 26

Vacon Plc
AC drive
VACON PLC
Vacon NX_ OPTIONS Internal brake choppers
ORDER TYPE CODE SUITABILITY DESCRIPTION
208-240 V
NX_00752___1___ FR7 Factory option *
NX_00882___1___ FR7 Factory option *
NX_01142___1___ FR7 Factory option *
NX_01402___1___ FR8 Factory option, includes the connection box */**
NX_01702___1___ FR8 Factory option, includes the connection box */**
NX_02052___1___ FR8 Factory option, includes the connection box */**
380-500 V
NX_00725___1___ FR7 Factory option *
NX_00875___1___ FR7 Factory option *
NX_01055___1___ FR7 Factory option *
NX_01405___1___ FR8 Factory option, includes the connection box */**
NX_01685___1___ FR8 Factory option, includes the connection box */**
NX_02055___1___ FR8 Factory option, includes the connection box */**
NX_02615___1___ FR9 Factory option, includes the connection box */**
NX_03005___1___ FR9 Factory option, includes the connection box */**
NX_03855___1___ FR10 Factory option *
NX_04605___1___ FR10 Factory option *
NX_05205___1___ FR10 Factory option *
NX_05905___1___ FR11 Factory option *
NX_06505___1___ FR11 Factory option *
NX_07305___1___ FR11 Factory option *
NX_08205___1___ FR12 Factory option *
NX_09205___1___ FR12 Factory option *
NX_10305___1___ FR12 Factory option *
525-690 V
NX_00046___1___ FR6 Factory option *
NX_00056___1___ FR6 Factory option *
NX_00076___1___ FR6 Factory option *
NX_00106___1___ FR6 Factory option *
NX_00136___1___ FR6 Factory option *
NX_00186___1___ FR6 Factory option *
NX_00226___1___ FR6 Factory option *
NX_00276___1___ FR6 Factory option *
NX_00346___1___ FR6 Factory option *
NX_00416___1___ FR7 Factory option *
NX_00526___1___ FR7 Factory option *
NX_00626___1___ FR8 Factory option, includes the connection box */**
NX_00806___1___ FR8 Factory option, includes the connection box */**
NX_01006___1___ FR8 Factory option, includes the connection box */**
NX_01256___1___ FR9 Factory option, includes the connection box */**
NX_01446___1___ FR9 Factory option, includes the connection box */**
NX_01706___1___ FR9 Factory option, includes the connection box */**
NX_02086___1___ FR9 Factory option, includes the connection box */**
NX_02616___1___ FR10 Factory option *
NX_03256___1___ FR10 Factory option *
NX_03856___1___ FR10 Factory option *
NX_04166___1___ FR10 Factory option *
NX_04606___1___ FR11 Factory option *
NX_05026___1___ FR11 Factory option *
NX_05906___1___ FR11 Factory option *
NX_06506___1___ FR12 Factory option *
NX_07506___1___ FR12 Factory option *
NX_08206___1___ FR12 Factory option *
*The factory option can be ordered only as a part of the AC drive, they can not be ordered separately
**Increases the total height of the AC drive by 203 mm
Pay also attention to the additional space required for the cables
In NXC the option +MDC is obligatory with brake choppers (in order to get the terminals lower for easy installation of the cables)
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 27

Vacon Plc
AC drive
VACON PLC
Vacon NX_ OPTIONS DC-connection (FR8-FR11)
ORDER TYPE CODE SUITABILITY DESCRIPTION
208-240 V
NX_01402____B__ FR8 Factory option, includes the connection box */**
NX_01702____B__ FR8 Factory option, includes the connection box */**
NX_02052____B__ FR8 Factory option, includes the connection box */**
NX_02612____B__ FR9 Factory option, includes the connection box */**
NX_03002____B__ FR9 Factory option, includes the connection box */**
380-500 V
NX_01405____B__ FR8 Factory option, includes the connection box */**
NX_01685____B__ FR8 Factory option, includes the connection box */**
NX_02055____B__ FR8 Factory option, includes the connection box */**
NX_02615____B__ FR9 Factory option, includes the connection box */**
NX_03005____B__ FR9 Factory option, includes the connection box */**
NX_03855____B__ FR10 Factory option *
NX_04605____B__ FR10 Factory option *
NX_05205____B__ FR10 Factory option *
NX_05905____B__ FR11 Factory option *
NX_06505____B__ FR11 Factory option *
NX_07305____B__ FR11 Factory option *
525-690 V
NX_00626____B__ FR8 Factory option, includes the connection box */**
NX_00806____B__ FR8 Factory option, includes the connection box */**
NX_01006____B__ FR8 Factory option, includes the connection box */**
NX_01256____B__ FR9 Factory option, includes the connection box */**
NX_01446____B__ FR9 Factory option, includes the connection box */**
NX_01706____B__ FR9 Factory option, includes the connection box */**
NX_02086____B__ FR9 Factory option, includes the connection box */**
NX_02616____B__ FR10 Factory option *
NX_03256____B__ FR10 Factory option *
NX_03856____B__ FR10 Factory option *
NX_04166____B__ FR11 Factory option *
NX_04606____B__ FR11 Factory option *
NX_05026____B__ FR11 Factory option *
NX_05906____B__ FR11 Factory option *
*The factory option can be ordered only as a part of the AC drive, they can not be ordered separately
**Increases the total height of the AC drive by 203 mm
Pay also attention to the additional space required for the cables
Vacon NX_ OPTIONS Internal brake resistors
ORDER TYPE CODE SUITABILITY Resistance Energy 2 s full Avarage power
[Ω] torque braking 1 pulse/min
[kJ] [W]
NX_00035___2___ FR4 120 4 45
NX_00045___2___ FR4 120 4 45
NX_00055___2___ FR4 120 4 45
NX_00075___2___ FR4 120 4 45
NX_00095___2___ FR4 120 4 45
NX_00125___2___ FR4 120 4 45
NX_00165___2___ FR5 55 8,9 100
NX_00225___2___ FR5 55 8,9 100
NX_00315___2___ FR5 55 8,9 100
NX_00385___2___ FR6 30 16 175
NX_00455___2___ FR6 30 16 175
NX_00615___2___ FR6 30 16 175
The resistors are designed for 2 s full torque braking from nominal motor speed to zero or 1 s full power braking every minute
Please see more information from Brake resistor's manual (please download from www.vacon.com)
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 28

Vacon Plc
AC drive
VACON PLC
Vacon NX_ OPTIONS External brake resistors
ORDER TYPE CODE SUITABILITY Continuous Power [kW] Resistance WEIGHT DIMENSIONS
[Ω] [KG] W x H x D
208-240 V [mm]
BRR-0025-LD-2 NX_00032-NX_00252 Brake resistor 0,3 kW 30 0,39 60x31x165
BRR-0031-LD-2 NX_00312 Brake resistor 0,4 kW 20 0,88 60x31x246
BRR-0061-LD-2 NX_00482-NX_00612 Brake resistor 0,8 kW 10 1,45 60x31x386
BRR-0114-LD-2 NX_00752-NX_01142 Brake resistor 2,5 kW 3,3 3,3 124x117x426
BRR-0205-LD-2 NX_01402-NX_03002 Brake resistor 5,8 kW 1,4 11 260x101x745
BRR-0025-HD-2 NX_00032-NX_00252 Brake resistor 0,1 kW 30 2 60x106x381
BRR-0031-HD-2 * NX_00312 Brake resistor 0,2 kW 20 2,4 124x122x400
BRR-0061-HD-2 * NX_00482-NX_00612 Brake resistor 0,3 kW 10 4,6 124x122x700
BRR-0114-HD-2 * NX_00752-NX_01142 Brake resistor 1 kW 3,3 12,8 260x101x860
BRR-0205-HD-2 * NX_01402-NX_03002 Brake resistor 2,2 kW 1,4 29 260x263x960
Transfer products
380-500 V
BRR-0022-LD-5 NX_00035-NX_00225 Brake resistor 0,6 kW 63 1,2 60x31x335
BRR-0031-LD-5 NX_00315 Brake resistor 0,9 kW 42 1,8 117x124x225
BRR-0045-LD-5 NX_00385-NX_00455 Brake resistor 1,8 kW 21 3,3 117x124x426
BRR-0061-LD-5 NX_00615 Brake resistor 1,1 kW 21 4 117x124x526
BRR-0105-LD-5 NX_00725-NX_01055 Brake resistor 2,3 kW 6,5 12,8 260x101x860
BRR-0300-LD-5 * NX_01405-NX_03005 Brake resistor 4,6 kW 3,25 29 260x263x960
BRR-0520-LD-5 * NX_03855-NX_05205 Brake resistor 12 kW 1,4 30 480x600x740
BRR-0730-LD-5 * NX_05905-NX_07305 Brake resistor 19 kW 0,9 35 480x600x740
BRR-0022-HD-5 * NX_00035-NX_00225 Brake resistor 0,2 kW 63 3,5 124x126x540
BRR-0031-HD-5 * NX_00315 Brake resistor 0,4 kW 42 4,6 124x126x700
BRR-0045-HD-5 * NX_00385-NX_00455 Brake resistor 0,7 kW 21 11,3 260x101x700
BRR-0061-HD-5 * NX_00615 Brake resistor 1,1 kW 14 12,8 260x101x860
BRR-0105-HD-5 * NX_00725-NX_01055 Brake resistor 2,3 kW 6,5 25 480x300x530
BRR-0300-HD-5 * NX_01405-NX_03005 Brake resistor 4,6 kW 3,25 79 480x300x740
BRR-0520-HD-5 * NX_03855-NX_05205 Brake resistor 7 kW 1,4 153 480x1020x740
BRR-0730-HD-5 * NX_05905-NX_07305 Brake resistor 13 kW 0,9 223 480x1320x740
for NX_08205-NX_10305 (FR12) please use 2xBRR0520LD5 or 2xBRR0520HD5
Transfer products
525-690 V SUITABILITY
BRR-0013-LD-6 NX_00036-NX_00136 Brake resistor 3,2 kW 100 1,45 60x31x405
BRR-0034-LD-6 NX_00186-NX_00346 Brake resistor 5,0 kW 30 3,3 117x124x426
BRR-0052-LD-6 NX_00416-NX_00526 Brake resistor 1,5kW 18 5,6 117x124x725
BRR-0100-LD-6 * NX_00626-NX_01006 Brake resistor 3,3kW 9 14,6 260x101x960
BRR-0208-LD-6 * NX_01446-NX_02086 Brake resistor 4kW 7 29 260x263x860
BRR-0416-LD-6 * NX_02166-NX_04166 Brake resistor 13 kW 2,5 53 480x300x740
BRR-0590-LD-6 * NX_04606-NX_05906 Brake resistor 19 kW 1,7 79 480x300x740
BRR-0013-HD-6 * NX_00036-NX_00136 Brake resistor 0,7 kW 100 3,9 124x126x600
BRR-0034-HD-6 * NX_00186-NX_00346 Brake resistor 2,5kW 30 13 260x101x800
BRR-0052-HD-6 * NX_00416-NX_00526 Brake resistor 4kW 18 29 260x263x900
BRR-0100-HD-6 * NX_00626-NX_01006 Brake resistor 9 kW 9 43,4 480x300x740
BRR-0208-HD-6 * NX_01446-NX_02086 Brake resistor 12 kW 7 51 480x300x740
BRR-0416-HD-6 * NX_02166-NX_04166 Brake resistor 34 kW 2,5 153 480x1020x740
BRR-0590-HD-6 * NX_04606-NX_05906 Brake resistor 50 kW 1,7 223 480x1320x740
for NX_06506-NX_08206 (FR12) please use 2xBRR0416LD6 or 2xBRR0416HD6
Transfer products
*Thermal protection switch included
LD = LIGHT DUTY: 5 s NOMINAL TORQUE BRAKING FROM NOMINAL SPEED REDUCED LINEARLY TO ZERO ONCE PER 120 s
HD = HEAVY DUTY: 3 s NOMINAL TORQUE BRAKING AT NOMINAL SPEED + 7 s NOMINAL TORQUE BRAKING FROM NOMINAL
SPEED REDUCED LINEARLY TO ZERO ONCE PER 120 s
Vacon NX_ OPTIONS Overtemperature sensors
ORDER TYPE CODE
SUITABILITY
OT-1
OT-2
BRR-0025-LD-2 - BRR-0061-LD-2, BRR-0022-LD-5, BRR-0013-LD-6
BRR-0144-LD-2 - BRR-0205-LD-2, BRR-0031-LD-5 - BRR-0300-LD-5, BRR-0034-LD-6 - BRR-0208-LD-6
Transfer products
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 29

Vacon Plc
AC drive
VACON PLC
VACON NX_OPTIONS External du/dt filters 380-690 V
ORDER TYPE CODE SUITABILITY IP class NOTE DIMENSIONS WEIGHT In [A] In [A]
W x H x D [kg] Ta 40°C Ta 50°C
[mm]
DUT-0012-6-0-P NX_* IP00 Maximum switching frequency 3,6 kHz 155x190x110 3 12 11
DUT-0025-6-0-P NX_* IP00 Maximum switching frequency 3,6 kHz 155x220x130 6 25 22
DUT-0055-6-0-P NX_* IP00 Maximum switching frequency 3,6 kHz 190x250x130 10 55 48
DUT-0080-6-0-P NX_* IP00 Maximum switching frequency 3,6 kHz 210x280x135 13 80 70
DUT-0130-6-0-P NX_* IP00 Maximum switching frequency 3,6 kHz 240x300x160 22 130 115
DUT-0210-6-0-P NX_* IP00 Maximum switching frequency 3,6 kHz 240x320x185 31 210 185
DUT-0280-6-0-P NX_* IP00 Maximum switching frequency 3,6 kHz 300x299x235 45 280 245
DUT-0350-6-0-P NX_* IP00 Maximum switching frequency 3,6 kHz 300x299x250 50 350 310
DUT-0420-6-0-P NX_* IP00 Maximum switching frequency 3,6 kHz 300x220x349 52 420 370
DUT-0600-6-0-P NX_* IP00 Maximum switching frequency 3,6 kHz 300x449x230 76 600 530
DUT-0820-6-0-P NX_* IP00 Maximum switching frequency 3,6 kHz 300x499x255 92 820 720
DUT-1200-6-0-P NX_* IP00 Maximum switching frequency 3,6 kHz 420x500x310 160 1200 1055
DUT-1500-6-0-P NX_* IP00 Maximum switching frequency 3,6 kHz 480x599x340 200 1500 1320
DUT-0012-6-2-P NX_* IP21 Maximum switching frequency 3,6 kHz 195x145x265 8,6 12 10,5
DUT-0034-6-2-P NX_* IP21 Maximum switching frequency 3,6 kHz 195x145x265 8,6 34 30
DUT-0055-6-2-P NX_* IP21 Maximum switching frequency 3,6 kHz 237x170x330 13 55 48
DUT-0100-6-2-P NX_* IP21 Maximum switching frequency 3,6 kHz 289x170x430 23 100 88
DUT-0210-6-2-P NX_* IP21 Maximum switching frequency 3,6 kHz 480x225x540 42 210 180
DUT-0012-6-5-P NX_* IP54 Maximum switching frequency 3,6 kHz 150x135x210 7 12 10,5
DUT-0034-6-5-P NX_* IP54 Maximum switching frequency 3,6 kHz 200x135x260 11 34 30
DUT-0055-6-5-P NX_* IP54 Maximum switching frequency 3,6 kHz 300x215x360 25 55 48
DUT-0100-6-5-P NX_* IP54 Maximum switching frequency 3,6 kHz 300x215x360 35 100 88
Transfer products
*When ordering NXC please choose +ODU; the filters are also suitable for 380-500 V supply voltage
Typecode e. g. DUT-0025-6-0-P=DUT-25A-690 V-IP00-manufacturer's identification
Vacon NX_OPTIONS External sine wave filters 380-500 V and 525-690 V
ORDER TYPE CODE SUITABILITY IP class NOTE DIMENSIONS WEIGHT [kg] In [A] In [A]
W x H x D Ta 40°C Ta 50°C
[mm]
SIN-0010-5-0-P NX_ * IP00 Minimum switching frequency 3,6 kHz 190x215x145 10 10 8,8
SIN-0018-5-0-P NX_ * IP00 Minimum switching frequency 3,6 kHz 210x240x154 12,5 18 16
SIN-0032-5-0-P NX_ * IP00 Minimum switching frequency 3,6 kHz 240x270x180 19 32 28
SIN-0048-5-0-P NX_ * IP00 Minimum switching frequency 3,6 kHz 240x270x200 24 48 42
SIN-0075-5-0-P NX_ * IP00 Minimum switching frequency 3,6 kHz 300x330x230 48 75 66
SIN-0110-5-0-P NX_ * IP00 Minimum switching frequency 3,6 kHz 360x460x290 73 110 97
SIN-0180-5-0-P NX_ * IP00 Minimum switching frequency 3,6 kHz 360x460x330 90 180 155
SIN-0270-5-0-P NX_ * IP00 Minimum switching frequency 3,6 kHz 360x500x350 122 270 235
SIN-0410-5-0-P NX_ * IP00 Minimum switching frequency 3,6 kHz 420x525x380 190 410 360
SIN-0600-5-0-P NX_ * IP00 Minimum switching frequency 3,6 kHz 514x500x490 220 600 525
SIN-0840-5-0-P NX_ * IP00 Minimum switching frequency 3,6 kHz 480x595x520 300 840 740
SIN-1160-5-0-P NX_ * IP00 Minimum switching frequency 3,6 kHz 660x710x550 420 1160 1020
SIN-1480-5-0-P NX_ * IP00 Minimum switching frequency 3,6 kHz 660x750x580 500 1480 1302
SIN-0005-6-0-P NXS, NXP, NXC * IP00 Minimum switching frequency 1,5 kHz 155x180x145 4,5 4,5 4
SIN-0008-6-0-P NXS, NXP, NXC * IP00 Minimum switching frequency 1,5 kHz 155x180x145 6,8 7,5 6,6
SIN-0014-6-0-P NXS, NXP, NXC * IP00 Minimum switching frequency 1,5 kHz 190x215x150 10 14 12
SIN-0023-6-0-P NXS, NXP, NXC * IP00 Minimum switching frequency 1,5 kHz 240x260x180 17 23 20
SIN-0035-6-0-P NXS, NXP, NXC * IP00 Minimum switching frequency 1,5 kHz 240x265x230 26 35 31
SIN-0052-6-0-P NXS, NXP, NXC * IP00 Minimum switching frequency 1,5 kHz 300x320x255 36 52 115
SIN-0085-6-0-P NXS, NXP, NXC * IP00 Minimum switching frequency 1,5 kHz 365x460x300 68 85 75
SIN-0122-6-0-P NXS, NXP, NXC * IP00 Minimum switching frequency 1,5 kHz 365x475x300 78 122 107
SIN-0185-6-0-P NXS, NXP, NXC * IP00 Minimum switching frequency 1,5 kHz 365x475x335 110 185 160
SIN-0287-6-0-P NXS, NXP, NXC * IP00 Minimum switching frequency 1,5 kHz 480x525x360 195 287 250
SIN-0390-6-0-P NXS, NXP, NXC * IP00 Minimum switching frequency 1,5 kHz 480x525x410 270 390 340
SIN-0460-6-0-P NXS, NXP, NXC * IP00 Minimum switching frequency 1,5 kHz 530x600x420 340 460 400
SIN-0620-6-0-P NXS, NXP, NXC * IP00 Minimum switching frequency 1,5 kHz 530x625x540 370 620 545
SIN-0780-6-0-P NXS, NXP, NXC * IP00 Minimum switching frequency 1,5 kHz 480x775x500 470 780 680
SIN-0920-6-0-P NXS, NXP, NXC * IP00 Minimum switching frequency 1,5 kHz 660x775x550 470 920 810
SIN-1180-6-0-P NXS, NXP, NXC * IP00 Minimum switching frequency 1,5 kHz 660x700x600 660 1180 1040
SIN-0004-5-5-P NXS, NXP, NXC * IP54 Minimum switching frequency 3,6 kHz 200x135x260 9,5 4,3 3,8
SIN-0008-5-5-P NXS, NXP, NXC * IP54 Minimum switching frequency 3,6 kHz 200x135x260 11,2 7,6 6,7
SIN-0012-5-5-P NXS, NXP, NXC * IP54 Minimum switching frequency 3,6 kHz 300x215x360 23,2 12 10,5
SIN-0016-5-5-P NXS, NXP, NXC * IP54 Minimum switching frequency 3,6 kHz 300x215x360 28,7 16 14
SIN-0023-5-5-P NXS, NXP, NXC * IP54 Minimum switching frequency 3,6 kHz 300x215x360 34,2 23 20
SIN-0032-5-5-P NXS, NXP, NXC * IP54 Minimum switching frequency 3,6 kHz 300x215x360 37 32 28
SIN-0038-5-5-P NXS, NXP, NXC * IP54 Minimum switching frequency 3,6 kHz 610x500x500 60 38 33
SIN-0046-5-5-P NXS, NXP, NXC * IP54 Minimum switching frequency 3,6 kHz 610x500x500 75 46 40
SIN-0055-5-5-P NXS, NXP, NXC * IP54 Minimum switching frequency 3,6 kHz 670x560x560 95 55 48
SIN-0061-5-5-P NXS, NXP, NXC * IP54 Minimum switching frequency 3,6 kHz 670x560x560 100 61 53
SIN-0072-5-5-P NXS, NXP, NXC * IP54 Minimum switching frequency 3,6 kHz 670x560x560 110 72 63
Transfer products
*When ordering NXC please choose +OSI
Typecode e. g. SIN-0010-5-0=SIN-10 A-500 V-IP00
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 30

Vacon Plc
AC drive
VACON PLC
Vacon NX_ OPTIONS External filters for NXL
ORDER TYPE CODE SUITABILITY DESCRIPTION DIMENSIONS
W x H x D
[mm]
RFI-0008-5-1 MF2-MF3/380-500 V RFI filter, H level, IP20, footprint 60x252x35
RFI-0013-2-1 MF2-MF3/208-240 V RFI filter, H level, IP20, footprint, 1~ SUPPLY 60x252x35
RFI-0012-2-1 MF2-MF3/208-240 V RFI filter, H level, IP20, 1~SUPPLY * 58x115x46
LRF-0003-5-1 MF2/380-500 V THD+RFI filter, H level, IP20, footprint 60x252x35
LRF-0005-2-1 NXL00022, NXL00032 THD+RFI filter, H level, IP20, 1~ SUPPLY 70x200x125
*Conducted emissions, moter cable max. 5 m: EMC C level
Transfer products
Vacon NX_ OPTIONS External RFI filters
ORDER TYPE CODE SUITABILITY DESCRIPTION DIMENSIONS
W x H x D
[mm]
RFI-0012-5-5 FR4, MF4 / 380-500 V C level, IP54, footprint 125x390x65
RFI-0031-5-5 FR5, MF5 / 380-500 V C level, IP54, footprint 135x490x65
RFI-0061-5-5 FR6, MF6 / 380-500 V C level, IP54, footprint 185x620x75
Transfer products
VACON NX_OPTIONS External RFI filters for NX
ORDER TYPE CODE SUITABILITY DESCRIPTION DIMENSIONS
W x H x D
500V: [mm]
RFI-0150-5-0 NXS, NXP C level, IP00 300x120x160
RFI-0130-5-0 NXS, NXP C level, IP00 439x240x110
RFI-0250-5-0 NXS, NXP C level, IP00 300x125x180
RFI-0320-5-0 NXS, NXP C level, IP00 300x115x210
RFI-0400-5-0 NXS, NXP C level, IP00 300x115x210
RFI-0600-5-0 NXS, NXP C level, IP00 300x135x210
RFI-1000-5-0 NXS, NXP C level, IP00 350x170x230
RFI-1600-5-0 NXS, NXP C level, IP00 400x160x250
RFI-2500-5-0 NXS, NXP C level, IP00 600x200x300
690 V:
RFI-0042-6-0 NXS, NXP C level, IP00 329x185x70
RFI-0100-6-0 NXS, NXP C level, IP00 379x220x90
RFI-0180-6-0 NXS, NXP C level, IP00 300x120x160
RFI-0300-6-0 NXS, NXP C level, IP00 300x115x210
RFI-0400-6-0 NXS, NXP C level, IP00 300x115x210
RFI-0600-6-0 NXS, NXP C level, IP00 300x135x210
RFI-0900-6-0 NXS, NXP C level, IP00 350x170x230
Transfer products
VACON NX_OPTIONS Integrated RFI filter options
ORDER TYPE CODE SUITABILITY DESCRIPTION
NX_00035__C____ NX_* ** Factory option
NX_00045__C____ NX_* ** Factory option
NX_00055__C____ NX_* ** Factory option
NX_00075__C____ NX_* ** Factory option
NX_00095__C____ NX_* ** Factory option
NX_00125__C____ NX_* ** Factory option
NX_00165__C____ NX_* ** Factory option
NX_00225__C____ NX_* ** Factory option
NX_00315__C____ NX_* ** Factory option
NX_00385__C____ NX_* ** Factory option
NX_00455__C____ NX_* ** Factory option
NX_00615__C____ NX_* ** Factory option
*NXS/NXP IP21: CONDUCTED EMISSIONS: C level, RADIATED EMISSIONS: H level
*NXS/NXP IP54: CONDUCTED EMISSIONS: C level, RADIATED EMISSIONS: C level
*NXL IP21/IP54: CONDUCTED EMISSIONS: C level, RADIATED EMISSIONS: C level
*The factory option can be ordered only as a part of the AC drive, they can not be ordered separately
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 31

Vacon Plc
AC drive
VACON PLC
Vacon NX_ OPTIONS Enclosure kits
ORDER TYPE CODE SUITABILITY DESCRIPTION
IP5-FR4 FR4, MF4 IP54 kit
IP5-FR5 FR5, MF5 IP54 kit
IP5-FR6 FR6, MF6 IP54 kit
Vacon NX_ OPTIONS Through hole mounting
ORDER TYPE CODE SUITABILITY DESCRIPTION
NX______T____T_ FR4-9, MF4-6 Factory option*
*The factory option can be ordered only as a part of the AC drive, they can not be ordered separately
Vacon NX_OPTIONS Through hole mounting kits IP21
ORDER TYPE CODE SUITABILITY DESCRIPTION
THR-FR4 FR4, MF4 Flange mounting kit for IP21 to the back
THR-FR5 FR5, MF5 Flange mounting kit for IP21 to the back
THR-FR6 FR6, MF6 Flange mounting kit for IP21 to the back
THR-FR7 FR7 Flange mounting kit for IP21 to the back
THR-FR8 FR8 Flange mounting kit for IP21 to the back
THR-FR9 FR9 Flange mounting kit for IP21 to the back
Vacon NX_OPTIONS Through hole mounting kits IP54
ORDER TYPE CODE SUITABILITY DESCRIPTION
THR-FR4-54 FR4, MF4 Flange mounting kit for IP54 to the back
THR-FR5-54 FR5, MF5 Flange mounting kit for IP54 to the back
THR-FR6-54 FR6, MF6 Flange mounting kit for IP54 to the back
VACON NX_ OPTIONS FR9 Floor Assembly Option
ORDER TYPE CODE SUITABILITY DESCRIPTION NOTE
LEG-FR9 FR9 Floor assembly option 493x1650x362 mm *
*FR9 total dimensions (WxHxD) with installed floor assembly option; whitout DC/brake connection box
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 32

Vacon Plc
AC drive
VACON PLC
Vacon NX_ OPTIONS Display panels, Door installation sets, RS232 cables, Fiber optic cables, Ferrite rings
ORDER TYPE CODE SUITABILITY DESCRIPTION NOTE
Display panels *
PAN-A NXS, NXP Alphanumeric display panel
PAN-B NX_ No display panel, reduction price
PAN-C NXL 7-segment display panel
PAN-RS NXL RS232C adapter panel
PAN-G NXS, NXP Graphical display panel
PAN-F NXS, NXP Dummy keypad (just case, LED's visible)
Door installation sets
DRA-02B NXS, NXP Door installation set for display panel, 2 m cable
DRA-04B NXS, NXP Door installation set for display panel, 4 m cable
DRA-15B NXS, NXP Door installation set for display panel, 15 m cable
DRA-02L NXL Door installation set for display panel, 2 m cable
DRA-04L NXL Door installation set for display panel, 4 m cable
* IP54 UNITS MUST HAVE A PANEL INSTALLED
RS232 cables
RS232C-2M NX_ 2 m RS232 serial link cable, pin to pin
RS232C-4M NX_ 4 m RS232 serial link cable, pin to pin
RS232C-15M NX_ 15 m RS232 serial link cable, pin to pin
RS232-1,5M NXS, NXP 1,5 m RS232 PC cable
Fiber optic cables for system bus (OPT-D1, OPT-D2)
SYS-1M NXP Fiber optic cable (pair), 1 m
SYS-2M NXP Fiber optic cable (pair), 2 m
SYS-4M NXP Fiber optic cable (pair), 4 m
SYS-10M NXP Fiber optic cable (pair), 10 m
Ferrite rings
FER-FGT FR10-14 Ferrite ring assembly* (in NXC please use +OCM option) 6 cores/set
* RECOMMENDED AT LEAST 2 SETS PER EVERY MOTOR CABLE
Vacon NX_ OPTIONS Control unit enclosures for NXP
ORDER TYPE CODE SUITABILITY DESCRIPTION
NXP__________N NXP IP54 Control unit enclosure for OPT-AF option board, standard *
NXP__________O NXP FR4-8 IP54 Control unit enclosure for OPT-AF option board, all circuit boards in the unit varnished *
NXP__________O NXP FR9-FR14 IP54 Control unit enclosure for OPT-AF option board, all circuit boards in the unit varnished *
SX-ECU-IP54 NXP IP54 Control box for OPT-AF board */ **
* It is required that the control unit or the whole drive is IP54 when OPT-AF board is used
**SX-ECU-IP54 is used if the control box is ordered separately or if the existing control unit is wanted to be upgraded up to IP54 because of the OPT-AF
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 33

Vacon Plc
AC drive
VACON PLC
Vacon NX_ OPTIONS I/O cards
ORDER TYPE CODE SUITABILITY DESCRIPTION
brackets stands for "limited support"
OPT-A1 NXS, NXP 6DI, 1DO, 2AI(mA/V), 1AO(mA/V), +10 Vref, +24 V/EXT+24 V
OPT-A2 NXS, NXP 2RO(NO/NC)
OPT-A3 NXS, NXP 1RO(NO/NC), 1RO(NC), 1 Thermistor
OPT-A4 NXP (NXS) 3DI(Encoder RS422), Out +5 V/+15 V
OPT-A5 NXP (NXS) 3DI(Encoder 10...24V), Out +15 V/+24 V
OPT-A7 NXP Double encoder (Wide Range), 6D1, 2xDO
OPT-A8 NXS, NXP As NXOPTA1, but analog I/O and +10Vref galv. de-coupled as a group
OPT-A9 NXS, NXP As NXOPTA1, but 2,5 mm² terminals
OPT-AA NXL 3DI, 1RO(NO/NC), 1DO
OPT-AE NXP (NXS) Encoder board (Wide Range), 3DI(Encoder 10...24 V), Out +15 V/+24 V, 2DO (encoder divider and direction)
OPT-AF NXP Protection against unexpected restart + ATEX appr. thermistor; control box or whole drive have to be IP54 *
OPT-AI NXL I/O expander board for NXL, 3DI, 1RO (NO), Thermistor
OPT-B1 NXS, NXP, (NXL) 6DI/DO (programmable, DI or DO)
OPT-B2 NX_ 1RO(NO/NC), 1RO(NO), Thermistor
OPT-B4 NX_ 1AI(mA, isolated), 2AO(mA, isolated), +24 V/EXT+24 V
OPT-B5 NX_ 3RO(NO)
OPT-B8 NXS, NXP (NXL) 3Pt100, +24 V/EXT+24 V
OPT-B9 NXS, NXP (NXL) 1RO(NO), 5 pcs of 41...240 VAC input
OPT-BB NXP ENDAT encoder card, 2xDO (RS422)
OPT-BC NXP RESOLVER, 3x DO (Wide Range)
OPT-C2 NX_ RS485 (Modbus/N2)
OPT-C3 NX_ Profibus DP
OPT-C4 NX_ LonWorks
OPT-C5 NX_ Profibus DP (D9 type connector)
OPT-C6 NX_ CANopen (slave)
OPT-C7 NX_ DeviceNet
OPT-C8 NX_ RS485 (D9 type connector, Modbus/RS485)
OPT-CI NX_ MODBUS/TCP
OPT-CJ NX_ BACnet (RS-485)
OPT-CG NXS, NXP S2 PROTOCOL
OPT-D1 NXP System Bus adapter (2x fiber optic cable, please find prices from previous page)
OPT-D2 NXP System Bus (1x fiber optic cable, please find prices from previous page) & CAN-bus (galv. decoupled)
OPT-D3 NXS, NXP RS232 adapter card (not galvanically decoupled)
OPT-D6 NXP CAN-Bus (galv. decoupled)
*It is required that the control unit or the whole drive is IP54 when OPT-AF board is used
Vacon NX_ OPTIONS I/O cards REDUCTION PRICE
OPT-A1r ** NXS, NXP 6DI, 1DO, 2AI(mA/V), 1AO(mA/V), +10 Vref, +24 V/EXT+24 V
OPT-A2r ** NXS, NXP 2RO(NO/NC)
**REDUCTION PRICE, (THIS CARD IS AS STANDARD IN NXS/NXP PRODUCTS)
Vacon NX_ OPTIONS I/O cards VARNISHED
OPT-__-V
Additional varnishing cost per one option card (when the card is ordered separately), e.g. OPT-A3-V
NXL___________V NXL MF4-6 Varnished PCB's, includes all circuit boards in the unit
NX____________V NXS & NXP FR4-8 Varnished PCB's, includes all circuit boards in the unit
NX____________G NXP FR9-FR14 Varnished PCB's, includes all circuit boards in the unit
NX____________B
NXP FR9-FR14, IP00 and standalones Varnished PCB's for FR9-FR14 IP00 modules and standalones
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 34

Vacon Plc
AC drive
VACON PLC
Vacon NX_OPTIONS Software tools
ORDER TYPE CODE
DESCRIPTION
Vacon NC1131-3 Engineering tool (Personal Licence) *
Vacon NC1131-3 Engineering tool (Company Site Licence) *
Vacon NC1131-3 Engineering tool (Annual Maintenance fee) *
NCDrive and NCLoad
1 cd including both NCDrive and NCLoad
*Personal Licence covers an installation CD-ROM, personal licence excludes updates, training and technical support
Company Site Licence includes unlimited number of copies for one company excluding updates, training and technical support
Annual mainantenance fee includes extensive technical support (by phone and mail) and annual updates
Note! Participation in the Vacon NC1131-3 Engineering training cource is also required in order to get technical support
Please visit out website http://www.vacon.com/911.html for further details concerning NC1131-3 tool and training cource as well as other available training courses
Vacon NX_OPTIONS Application softwares
ORDER TYPE CODE SUITABILITY DESCRIPTION
ASFIFF12 NXS, NXP High Speed Application (>1900 Hz)
APFIFF11 NXP Shaft Synchronization Application
APFIFF12 NXP Position Control Application
Vacon NX_ OPTIONS Other options
ORDER TYPE CODE SUITABILITY DESCRIPTION
NXS Demo
NXS 115-230 V demo case, motor included
NXP Demo
NXP 115-230 V demo case, motor included
NXL Demo 1
NXL MF2 115 V demo, switches and pots included, no motor
NXL Demo 2
NXL MF2 230 V demo, switches and pots included, no motor
NXL Demo 2 MF4
NXL MF4 230 V demo case, motor included
DIN-MF2 NXL MF2 DIN rail assembly option
DIN-MF3 NXL MF3 DIN rail assembly option
Vacon NX_OPTIONS Other material
Marketing materials (e.g. brochures)
Spareparts
Service Tools
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 35

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 261 A, EMC level H, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC02615A2H0SSFA1A2 110 205 308 132 261 FR9/IP21 606x2275x605 308
NXC02615A5H0SSFA1A2 110 205 308 132 261 FR9/IP54 606x2405x605 318
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 261 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as H level ones.
Replace the H by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 36

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 300 A, EMC level H, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC03005A2H0SSFA1A2 132 245 368 160 300 FR9/IP21 606x2275x605 308
NXC03005A5H0SSFA1A2 132 245 368 160 300 FR9/IP54 606x2405x605 318
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 300 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as H level ones.
Replace the H by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 37

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 385 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC03855A2L0SSFA1A2 160 300 450 200 385 FR10/IP21 606x2275x605 371
NXC03855A5L0SSFA1A2 160 300 450 200 385 FR10/IP54 606x2405x605 381
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 385 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 38

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 460 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC04605A2L0SSFA1A2 200 385 578 250 460 FR10/IP21 606x2275x605 403
NXC04605A5L0SSFA1A2 200 385 578 250 460 FR10/IP54 606x2405x605 413
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 460 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 39

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 520 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC05205A2L0SSFA1A2 250 460 690 250 520 FR10/IP21 606x2275x605 403
NXC05205A5L0SSFA1A2 250 460 690 250 520 FR10/IP54 606x2405x605 413
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 520 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 40

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 590 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC05905A2L0SSFA1A2 250 520 780 315 590 FR11/IP21 806x2275x605 577
NXC05905A5L0SSFA1A2 250 520 780 315 590 FR11/IP54 806x2405x605 590
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 590 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 41

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 650 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC06505A2L0SSFA1A2 315 590 885 355 650 FR11/IP21 806x2275x605 577
NXC06505A5L0SSFA1A2 315 590 885 355 650 FR11/IP54 806x2405x605 590
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 650 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 42

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 730 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC07305A2L0SSFA1A2 355 650 975 400 730 FR11/IP21 806x2275x605 577
NXC07305A5L0SSFA1A2 355 650 975 400 730 FR11/IP54 806x2445x605 590
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm) **
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO, requires +TUP *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 730 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 43

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 820 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC08205A2L0SSFA1A2 400 730 1095 450 820 FR12/IP21 1206x2275x605 810
NXC08205A5L0SSFA1A2 400 730 1095 450 820 FR12/IP54 1206x2405x605 830
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker, including +AMO MCCB, not with +ILS, +IFU, +IFD or +ICO, requires +TUP *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for resistor connect. Brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +2x600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 820 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 44

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 920 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC09205A2L0SSFA1A2 450 820 1230 500 920 FR12/IP21 1206x2275x605 810
NXC09205A5L0SSFA1A2 450 820 1230 500 920 FR12/IP54 1206x2405x605 830
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker, including +AMO MCCB, not with +ILS, +IFU, +IFD or +ICO, requires +TUP *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for resistor connect. Brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +2x600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 920 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 45

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 1030 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC10305A2L0SSFA1A2 500 920 1380 560 1030 FR12/IP21 1206x2275x605 810
NXC10305A5L0SSFA1A2 500 920 1380 560 1030 FR12/IP54 1206x2405x605 830
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker, including +AMO MCCB, not with +ILS, +IFU, +IFD or +ICO, requires +TUP *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for resistor connect. Brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +2x600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 1030 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 46

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 1150 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC11505A2L0SSFA1A2 +IFD 560 1030 1545 630 1150 FR13/IP21 1406x2275x605 1050
NXC11505A5L0SSFA1A2 +IFD 560 1030 1545 630 1150 FR13/IP54 1406x2405x605 1060
+IFD (Load switch + bolt-on fuses) INCLUDED AS STANDARD
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker, including +AMO MCCB, not with +IFD (upgrades +IFD to +ICB), requires +TUP *
+MDC Terminals for DC connect. Including +CIT/+COT (W:+400 mm)
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
Vacon NXC 380-500 V, 1150 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 47

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 1300 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC13005A2L0SSFA1A2 +IFD 630 1150 1725 710 1300 FR13/IP21 1606x2275x605 1250
NXC13005A5L0SSFA1A2 +IFD 630 1150 1725 710 1300 FR13/IP54 1606x2405x605 1260
+IFD (Load switch + bolt-on fuses) INCLUDED AS STANDARD
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker, including +AMO MCCB, not with +IFD (upgrades +IFD to +ICB), requires +TUP *
+MDC Terminals for DC connect. Including +CIT/+COT (W:+400 mm)
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
Vacon NXC 380-500 V, 1300 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 48

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 1450 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC14505A2L0SSFA1A2 +IFD 710 1300 1950 800 1450 FR13/IP21 1606x2275x605 1250
NXC14505A5L0SSFA1A2 +IFD 710 1300 1950 800 1450 FR13/IP54 1606x2405x605 1260
+IFD (Load switch + bolt-on fuses) INCLUDED AS STANDARD
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker, including +AMO MCCB, not with +IFD (upgrades +IFD to +ICB), requires +TUP *
+MDC Terminals for DC connect. Including +CIT/+COT (W:+400 mm)
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
Vacon NXC 380-500 V, 1450 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 49

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 1770 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC17705A2L0SSFA1A2+ODU+ICB+AMO+TUP 900 1600 2400 1000 1770 FR14/IP21 2806x2275x605 2250
NXC17705A5L0SSFA1A2+ODU+ICB+AMO+TUP 900 1600 2400 1000 1770 FR14/IP54 2806x2405x605 2280
+ODU (du/dt filter), +ICB (MCCB), +AMO (ICB motor operator), +TUP INCLUDED AS STANDARD *
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+OCM Common mode chokes To be put on motor cable
+OSI Sine wave filter *** W: +2x800 mm
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
***PLEASE CHECK THE AVAILABILITY FROM THE FACTORY
Vacon NXC 380-500 V, 1770 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 50

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 2150 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC21505A2L0SSFA1A2+ODU+ICB+AMO+TUP 1100 1940 2910 1200 2150 FR14/IP21 2806x2275x605 2300
NXC21505A5L0SSFA1A2+ODU+ICB+AMO+TUP 1100 1940 2910 1200 2150 FR14/IP54 2806x2405x605 2330
+ODU (du/dt filter), +ICB (MCCB), +AMO (ICB motor operator), +TUP INCLUDED AS STANDARD *
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+OCM Common mode chokes To be put on motor cable
+OSI Sine wave filter *** W: +2x800 mm
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
***PLEASE CHECK THE AVAILABILITY FROM THE FACTORY
Vacon NXC 380-500 V, 2150 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 51

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 385 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC03855A2L0TSFA1A2 160 300 450 200 385 FR10/IP21 606x2275x605 371
NXC03855A5L0TSFA1A2 160 300 450 200 385 FR10/IP54 606x2405x605 381
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with IFU *
+IFU aR fuses & base Not with ICB
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 385 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 52

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 460 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC04605A2L0TSFA1A2 200 385 578 250 460 FR10/IP21 606x2275x605 403
NXC04605A5L0TSFA1A2 200 385 578 250 460 FR10/IP54 606x2405x605 413
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with IFU *
+IFU aR fuses & base Not with ICB
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 460 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 53

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 520 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC05205A2L0TSFA1A2 250 460 690 250 520 FR10/IP21 606x2275x605 403
NXC05205A5L0TSFA1A2 250 460 690 250 520 FR10/IP54 606x2405x605 413
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with IFU *
+IFU aR fuses & base Not with ICB
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 520 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 54

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 590 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC05905A2L0TSFA1A2 250 520 780 315 590 FR11/IP21 806x2275x605 577
NXC05905A5L0TSFA1A2 250 520 780 315 590 FR11/IP54 806x2405x605 590
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 590 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 55

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 650 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC06505A2L0TSFA1A2 315 590 885 355 650 FR11/IP21 806x2275x605 577
NXC06505A5L0TSFA1A2 315 590 885 355 650 FR11/IP54 806x2405x605 590
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 650 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 56

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 730 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC07305A2L0TSFA1A2 355 650 975 400 730 FR11/IP21 806x2275x605 577
NXC07305A5L0TSFA1A2 355 650 975 400 730 FR11/IP54 806x2445x605 590
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO, requires +TUP *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 730 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 57

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 820 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC08205A2L0TSFA1A2 400 730 1095 450 820 FR12/IP21 1206x2275x605 810
NXC08205A5L0TSFA1A2 400 730 1095 450 820 FR12/IP54 1206x2405x605 830
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker, including +AMO MCCB, not with +ILS, +IFU, +IFD or +ICO, requires +TUP *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) **
+OSI Sine wave filter W: +2x600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 820 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 58

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 920 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC09205A2L0TSFA1A2 450 820 1230 500 920 FR12/IP21 1206x2275x605 810
NXC09205A5L0TSFA1A2 450 820 1230 500 920 FR12/IP54 1206x2405x605 830
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker, including +AMO MCCB, not with +ILS, +IFU, +IFD or +ICO, requires +TUP *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +2x600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 920 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 59

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 1030 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC10305A2L0TSFA1A2 500 920 1380 560 1030 FR12/IP21 1206x2275x605 810
NXC10305A5L0TSFA1A2 500 920 1380 560 1030 FR12/IP54 1206x2405x605 830
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker, including +AMO MCCB, not with +ILS, +IFU, +IFD or +ICO, requires +TUP *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) **
+OSI Sine wave filter W: +2x600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 380-500 V, 1030 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 60

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 1150 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC11505A2L0TSFA1A2 +ICB +AMO +TUP 560 1030 1545 630 1150 FR13/IP21 1406x2275x605 1050
NXC11505A5L0TSFA1A2 +ICB +AMO +TUP 560 1030 1545 630 1150 FR13/IP54 1406x2405x605 1060
+ICB (MCCB), +AMO (ICB motor operator), +TUP INCLUDED AS STANDARD *
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
Vacon NXC 380-500 V, 1150 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 61

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 1300 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC13005A2L0TSFA1A2 +ICB +AMO +TUP 630 1150 1725 710 1300 FR13/IP21 2006x2275x605 1700
NXC13005A5L0TSFA1A2 +ICB +AMO +TUP 630 1150 1725 710 1300 FR13/IP54 2006x2405x605 1710
+ICB (MCCB), +AMO (ICB motor operator), +TUP INCLUDED AS STANDARD *
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
Vacon NXC 380-500 V, 1300 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 62

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 1450 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC14505A2L0TSFA1A2 +ICB +AMO +TUP 710 1300 1950 800 1450 FR13/IP21 2006x2275x605 1700
NXC14505A5L0TSFA1A2 +ICB +AMO +TUP 710 1300 1950 800 1450 FR13/IP54 2006x2405x605 1710
+ICB (MCCB), +AMO (ICB motor operator), +TUP INCLUDED AS STANDARD *
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
Vacon NXC 380-500 V, 1450 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 63

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 1770 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC17705A2L0TSFA1A2+ODU+ICB+AMO+TUP 900 1600 2400 1000 1770 FR14/IP21 2806x2275x605 2250
NXC17705A5L0TSFA1A2+ODU+ICB+AMO+TUP 900 1600 2400 1000 1770 FR14/IP54 2806x2405x605 2280
+ODU (du/dt filter), +ICB (MCCB), +AMO (ICB motor operator), +TUP INCLUDED AS STANDARD *
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+OCM Common mode chokes To be put on motor cable
+OSI Sine wave filter *** W: +2x800 mm
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
***PLEASE CHECK THE AVAILABILITY FROM THE FACTORY
Vacon NXC 380-500 V, 1770 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 64

Vacon Plc
AC drive
VACON PLC
Vacon NXC 380-500 V, 2150 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC21505A2L0TSFA1A2+ODU+ICB+AMO+TUP 1100 1940 2910 1200 2150 FR14/IP21 2806x2275x605 2300
NXC21505A5L0TSFA1A2+ODU+ICB+AMO+TUP 1100 1940 2910 1200 2150 FR14/IP54 2806x2405x605 2330
+ODU (du/dt filter), +ICB (MCCB), +AMO (ICB motor operator), +TUP INCLUDED AS STANDARD *
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+OCM Common mode chokes To be put on motor cable
+OSI Sine wave filter *** W: +2x800 mm
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
***PLEASE CHECK THE AVAILABILITY FROM THE FACTORY
Vacon NXC 380-500 V, 2150 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 65

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 125 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC01256A2L0SSFA1A2 90 100 150 110 125 FR9/IP21 606x2275x605 308
NXC01256A5L0SSFA1A2 90 100 150 110 125 FR9/IP54 606x2405x605 318
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 125 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 66

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 144 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC01446A2L0SSFA1A2 110 125 188 132 144 FR9/IP21 606x2275x605 308
NXC01446A5L0SSFA1A2 110 125 188 132 144 FR9/IP54 606x2405x605 318
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options
DESCRIPTION
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive ***
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 144 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 67

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 170 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC01706A2L0SSFA1A2 132 144 216 160 170 FR9/IP21 606x2275x605 308
NXC01706A5L0SSFA1A2 132 144 216 160 170 FR9/IP54 606x2405x605 318
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light MCCB, not with +ILS, +IFU, +IFD or +ICO
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo Not with +ILS, +ICB or +IFD
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 170 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 68

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 208 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC02086A2L0SSFA1A2 160 170 255 200 208 FR9/IP21 606x2275x605 308
NXC02086A5L0SSFA1A2 160 170 255 200 208 FR9/IP54 606x2405x605 318
I(H) = nominal current for 150% overload requirement (at max. 50°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 208 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 69

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 261 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC02616A2L0SSFA1A2 200 208 312 250 261 FR10/IP21 606x2275x605 341
NXC02616A5L0SSFA1A2 200 208 312 250 261 FR10/IP54 606x2405x605 351
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 261 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 70

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 325 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC03256A2L0SSFA1A2 250 261 392 315 325 FR10/IP21 606x2275x605 371
NXC03256A5L0SSFA1A2 250 261 392 315 325 FR10/IP54 606x2405x605 381
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 325 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 71

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 385 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC03856A2L0SSFA1A2 315 325 488 355 385 FR10/IP21 606x2275x605 371
NXC03856A5L0SSFA1A2 315 325 488 355 385 FR10/IP54 606x2405x605 381
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ICO Contactor AC-1 Requires +TUP *
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 385 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 72

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 416 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC04166A2L0SSFA1A2 * 315 325 488 400 416 FR10/IP21 606x2275x605 371
NXC04166A5L0SSFA1A2 * 315 325 488 400 416 FR10/IP54 606x2405x605 381
* max. 35 C ambient temperature
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP **
+ACL Cabinet light Requires +TUP **
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP **
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive ***
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ICO Contactor AC-1 Requires +TUP **
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ****
+OSI Sine wave filter W: +600 mm, Please check the availability from the factory
** IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
*** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
**** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 416 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 73

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 460 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC04606A2L0SSFA1A2 355 385 578 450 460 FR11/IP21 806x2275x605 577
NXC04606A5L0SSFA1A2 355 385 578 450 460 FR11/IP54 806x2405x605 590
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 460 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 74

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 502 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC05026A2L0SSFA1A2 450 460 690 500 502 FR11/IP21 806x2275x605 524
NXC05026A5L0SSFA1A2 450 460 690 500 502 FR11/IP54 806x2405x605 537
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 502 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 75

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 590 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC05906A2L0SSFA1A2 * 500 502 753 560 590 FR11/IP21 806x2275x605 577
NXC05906A5L0SSFA1A2 * 500 502 753 560 590 FR11/IP54 806x2445x605 590
* max. 35 C ambient temperature
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP **
+ACL Cabinet light Requires +TUP **
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP **
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive ***
+ICB Circuit breaker MCCB, not with +ILS, +IFU, +IFD or +ICO, requires +TUP **
+ICO Contactor AC-1 Requires +TUP **
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for DC connect. DC-connection / additional dc/brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ****
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
** IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
*** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
**** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 590 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 76

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 650 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC06506A2L0SSFA1A2 560 590 885 630 650 FR12/IP21 1206x2275x605 745
NXC06506A5L0SSFA1A2 560 590 885 630 650 FR12/IP54 1206x2405x605 765
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker, including +AMO MCCB, not with +ILS, +IFU, +IFD or +ICO, requires +TUP *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for resistor connect. Brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +2x600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 650 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 77

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 750 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC07506A2L0SSFA1A2 630 650 975 710 750 FR12/IP21 1206x2275x605 745
NXC07506A5L0SSFA1A2 630 650 975 710 750 FR12/IP54 1206x2405x605 765
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker, including +AMO MCCB, not with +ILS, +IFU, +IFD or +ICO, requires +TUP *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for resistor connect. Brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +2x600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 750 A, EMC level L, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 78

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 820 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC08206A2L0SSFA1A2 * 710 750 975 800 820 FR12/IP21 1206x2275x605 745
NXC08206A5L0SSFA1A2 * 710 750 975 800 820 FR12/IP54 1206x2405x605 765
* max. 35 C ambient temperature
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP **
+ACL Cabinet light Requires +TUP **
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive ***
+ICB Circuit breaker, including +AMO MCCB, not with +ILS, +IFU, +IFD or +ICO, requires +TUP **
+ICO Contactor AC-1 Requires +TUP **
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with +ILS, +ICB or +IFD
+ILS Load switch Not with +IFU, +ICB or +IFD
+MDC Terminals for resistor connect. Brake chopper terminals
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ****
+OSI Sine wave filter W: +2x600 mm, Please check the availability from the factory
** IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
*** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
**** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 820 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 79

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 920 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC09206A2L0SSFA1A2 +IFD 800 820 1230 900 920 FR13/IP21 1406x2275x605 1050
NXC09206A5L0SSFA1A2 +IFD 800 820 1230 900 920 FR13/IP54 1406x2405x605 1060
+IFD (Load switch + bolt-on fuses) INCLUDED AS STANDARD
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker, including +AMO MCCB; not with +IFD, (upgrades +IFD to +ICB), requires +TUP *
+MDC Terminals for DC connect. Including +CIT/+COT (W:+400 mm)
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
Vacon NXC 525-690 V, 920 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 80

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 1030 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC10306A2L0SSFA1A2 +IFD 900 920 1380 1000 1030 FR13/IP21 1406x2275x605 1050
NXC10306A5L0SSFA1A2 +IFD 900 920 1380 1000 1030 FR13/IP54 1406x2405x605 1060
+IFD (Load switch + bolt-on fuses) INCLUDED AS STANDARD
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker, including +AMO MCCB; not with +IFD, (upgrades +IFD to +ICB), requires +TUP *
+MDC Terminals for DC connect. Including +CIT/+COT (W:+400 mm)
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
Vacon NXC 525-690 V, 1030 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 81

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 1180 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC11806A2L0SSFA1A2 +IFD* 1000 1030 1463 1150 1180 FR13/IP21 1406x2275x605 1050
NXC11806A5L0SSFA1A2 +IFD* 1000 1030 1463 1150 1180 FR13/IP54 1406x2405x605 1060
+IFD (Load switch + bolt-on fuses) INCLUDED AS STANDARD
* max. 35 C ambient temperature
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP **
+ACL Cabinet light Requires +TUP **
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive ***
+ICB Circuit breaker, including +AMO MCCB; not with +IFD, (upgrades +IFD to +ICB), requires +TUP *
+MDC Terminals for DC connect. Including +CIT/+COT (W:+400 mm)
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
** IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
*** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
Vacon NXC 525-690 V, 1180 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 82

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 1500 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC15006A2L0SSFA1A2+ODU+ICB+AMO+TUP 1300 1300 1950 1500 1500 FR14/IP21 2406x2275x605 1950
NXC15006A5L0SSFA1A2+ODU+ICB+AMO+TUP 1300 1300 1950 1500 1500 FR14/IP54 2406x2405x605 1980
+ODU (du/dt filter), +ICB (MCCB), +AMO (ICB motor operator), +TUP INCLUDED AS STANDARD *
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+OCM Common mode chokes To be put on motor cable
+OSI Sine wave filter *** W: +2x800 mm
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
***PLEASE CHECK THE AVAILABILITY FROM THE FACTORY
Vacon NXC 525-690 V, 1500 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 83

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 1900 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC19006A2L0SSFA1A2+ODU+ICB+AMO+TUP 1500 1500 2250 1800 1900 FR14/IP21 2806x2275x605 2250
NXC19006A5L0SSFA1A2+ODU+ICB+AMO+TUP 1500 1500 2250 1800 1900 FR14/IP54 2806x2405x605 2280
+ODU (du/dt filter), +ICB (MCCB), +AMO (ICB motor operator), +TUP INCLUDED AS STANDARD *
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+OCM Common mode chokes To be put on motor cable
+OSI Sine wave filter *** W: +2x800 mm
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
***PLEASE CHECK THE AVAILABILITY FROM THE FACTORY
Vacon NXC 525-690 V, 1900 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 84

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 2250 A, EMC level L, air-cooled AC drive, 6-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC22506A2L0SSFA1A2+ODU+ICB+AMO+TUP* 1800 1900 2782 2000 2250 FR14/IP21 2806x2275x605 2300
NXC22506A5L0SSFA1A2+ODU+ICB+AMO+TUP* 1800 1900 2782 2000 2250 FR14/IP54 2806x2405x605 2330
+ODU (du/dt filter), +ICB (MCCB), +AMO (ICB motor operator), +TUP INCLUDED AS STANDARD **
* max. 35 C ambient temperature
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP **
+ACL Cabinet light Requires +TUP **
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive ***
+OCM Common mode chokes To be put on motor cable
+OSI Sine wave filter **** W: +2x800 mm
** IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
*** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
****PLEASE CHECK THE AVAILABILITY FROM THE FACTORY
Vacon NXC 525-690 V, 2250 A, EMC level T, air-cooled AC drive, 6-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 85

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 261 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC02616A2L0TSFA1A2 200 208 312 250 261 FR10/IP21 606x2275x605 341
NXC02616A5L0TSFA1A2 200 208 312 250 261 FR10/IP54 606x2405x605 351
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with IFU *
+IFU aR fuses & base Not with +ICB
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 261 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
Vacon NXL 380-500 V, IP21, EMC level H, air-cooled AC drive
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 86

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 325 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC03256A2L0TSFA1A2 250 261 392 315 325 FR10/IP21 606x2275x605 371
NXC03256A5L0TSFA1A2 250 261 392 315 325 FR10/IP54 606x2405x605 381
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with IFU *
+IFU aR fuses & base Not with ICB
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 325 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 87

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 385 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC03856A2L0TSFA1A2 315 325 488 355 385 FR10/IP21 606x2275x605 371
NXC03856A5L0TSFA1A2 315 325 488 355 385 FR10/IP54 606x2405x605 381
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with IFU *
+IFU aR fuses & base Not with ICB
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 385 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 88

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 416 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC04166A2L0TSFA1A2 * 315 325 488 400 416 FR10/IP21 606x2275x605 371
NXC04166A5L0TSFA1A2 * 315 325 488 400 416 FR10/IP54 606x2405x605 381
* max. 35 C ambient temperature
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP **
+ACL Cabinet light Requires +TUP **
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP **
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive ***
+ICB Circuit breaker MCCB, not with IFU *
+IFU aR fuses & base Not with ICB
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ****
+OSI Sine wave filter W: +600 mm, Please check the availability from the factory
** IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
*** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
**** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 416 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 89

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 460 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC04606A2L0TSFA1A2 355 385 578 450 460 FR11/IP21 806x2275x605 524
NXC04606A5L0TSFA1A2 355 385 578 450 460 FR11/IP54 806x2405x605 537
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with ILS, IFU or IFD *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with ILS, IFD or ICB
+ILS Load switch 630A Not with ICB, IFU or IFD
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 460 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 90

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 502 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC05026A2L0TSFA1A2 450 460 690 500 502 FR11/IP21 806x2275x605 524
NXC05026A5L0TSFA1A2 450 460 690 500 502 FR11/IP54 806x2405x605 537
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker MCCB, not with ILS, IFU or IFD *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with ILS, IFD or ICB
+ILS Load switch 630A Not with ICB, IFU or IFD
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 502 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 91

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 590 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC05906A2L0TSFA1A2 * 500 502 753 560 590 FR11/IP21 806x2275x605 577
NXC05906A5L0TSFA1A2 * 500 502 753 560 590 FR11/IP54 806x2445x605 590
* max. 35 C ambient temperature
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP **
+ACL Cabinet light Requires +TUP **
+AMO ICB motor operator Including Open/Close push buttons on the door, requires +TUP **
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive ***
+ICB Circuit breaker MCCB, not with ILS, IFU or IFD, requires +TUP **
+ICO Contactor AC-1 Requires +TUP **
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with ILS, IFD or ICB
+ILS Load switch 630A Not with ICB, IFU or IFD
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ****
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
** IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
*** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
**** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 590 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 92

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 650 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC06506A2L0TSFA1A2 560 590 885 630 650 FR12/IP21 1206x2275x605 745
NXC06506A5L0TSFA1A2 560 590 885 630 650 FR12/IP54 1206x2405x605 765
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker, including +AMO MCCB, not with ILS, IFU or IFD, requires +TUP *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with ILS, IFD or ICB
+ILS Load switch 630A Not with ICB, IFU or IFD
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ***
+OSI Sine wave filter W: +2x600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 650 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 93

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 750 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC07506A2L0TSFA1A2 630 650 975 710 750 FR12/IP21 1206x2275x605 745
NXC07506A5L0TSFA1A2 630 650 975 710 750 FR12/IP54 1206x2405x605 765
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+ICB Circuit breaker, including +AMO MCCB, not with ILS, IFU or IFD, requires +TUP *
+ICO Contactor AC-1 Requires +TUP *
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with ILS, IFD or ICB
+ILS Load switch 630A Not with ICB, IFU or IFD
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) **
+OSI Sine wave filter W: +2x600 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
*** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 750 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 94

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 820 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC08206A2L0TSFA1A2 * 650 750 975 800 820 FR12/IP21 1206x2275x605 745
NXC08206A5L0TSFA1A2 * 650 750 975 800 820 FR12/IP54 1206x2405x605 765
* max. 35 C ambient temperature
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP **
+ACL Cabinet light Requires +TUP **
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive ***
+ICB Circuit breaker, including +AMO MCCB, not with ILS, IFU or IFD, requires +TUP **
+ICO Contactor AC-1 Requires +TUP **
+IFD Fuse switch + aR fuses Not with +ILS, +IFU or +ICB
+IFU aR fuses & base Not with ILS, IFD or ICB
+ILS Load switch 630A Not with ICB, IFU or IFD
+OCM Common mode chokes To be put on motor cable
+ODU du/dt filter Including +CIT/+COT (W:+400 mm) ****
+OSI Sine wave filter W: +2x600 mm, Please check the availability from the factory
** IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
*** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
**** FOR CORRECT ORIENTATION OF DU/DT TERMINALS PLEASE ORDER ALSO +COT IF REQUIRED
Vacon NXC 525-690 V, 820 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 95

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 920 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC09206A2L0TSFA1A2 +ICB +AMO +TUP 800 820 1230 900 920 FR13/IP21 1406x2275x605 1050
NXC09206A5L0TSFA1A2 +ICB +AMO +TUP 800 820 1230 900 920 FR13/IP54 1406x2405x605 1060
+ICB (MCCB) +AMO (ICB motor operator), +TUP INCLUDED AS STANDARD*
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
Vacon NXC 525-690 V, 920 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 96

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 1030 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC10306A2L0TSFA1A2 +ICB +AMO +TUP 900 920 1380 1000 1030 FR13/IP21 1406x2275x605 1050
NXC10306A5L0TSFA1A2 +ICB +AMO +TUP 900 920 1380 1000 1030 FR13/IP54 1406x2405x605 1060
+ICB (MCCB) +AMO (ICB motor operator), +TUP INCLUDED AS STANDARD*
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
Vacon NXC 525-690 V, 1030 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 97

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 1180 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC11806A2L0TSFA1A2 +ICB +AMO +TUP* 1000 1030 1463 1150 1180 FR13/IP21 1406x2275x605 1050
NXC11806A5L0TSFA1A2 +ICB +AMO +TUP* 1000 1030 1463 1150 1180 FR13/IP54 1406x2405x605 1060
+ICB (MCCB) +AMO (ICB motor operator), +TUP INCLUDED AS STANDARD*
* max. 35 C ambient temperature
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP **
+ACL Cabinet light Requires +TUP **
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive ***
+OCM Common mode chokes To be put on motor cable
+ODU
du/dt filter
+OSI Sine wave filter W: +800 mm, Please check the availability from the factory
** IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
*** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
Vacon NXC 525-690 V, 1180 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 98

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 1500 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC15006A2L0TSFA1A2+ODU+ICB+AMO+TUP 1300 1300 1950 1500 1500 FR14/IP21 2806x2275x605 2250
NXC15006A5L0TSFA1A2+ODU+ICB+AMO+TUP 1300 1300 1950 1500 1500 FR14/IP54 2806x2405x605 2280
+ODU (du/dt filter), +ICB (MCCB), +AMO (ICB motor operator), +TUP INCLUDED AS STANDARD *
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+OCM Common mode chokes To be put on motor cable
+OSI Sine wave filter *** W: +2x800 mm
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
***PLEASE CHECK THE AVAILABILITY FROM THE FACTORY
Vacon NXC 525-690 V, 1500 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 99

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 1900 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC19006A2L0TSFA1A2+ODU+ICB+AMO+TUP 1500 1500 2250 1800 1900 FR14/IP21 2806x2275x605 2250
NXC19006A5L0TSFA1A2+ODU+ICB+AMO+TUP 1500 1500 2250 1800 1900 FR14/IP54 2806x2405x605 2280
+ODU (du/dt filter), +ICB (MCCB), +AMO (ICB motor operator), +TUP INCLUDED AS STANDARD *
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP *
+ACL Cabinet light Requires +TUP *
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive **
+OCM Common mode chokes To be put on motor cable
+OSI Sine wave filter *** W: +2x800 mm
* IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
***PLEASE CHECK THE AVAILABILITY FROM THE FACTORY
Vacon NXC 525-690 V, 1900 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 100

Vacon Plc
AC drive
VACON PLC
Vacon NXC 525-690 V, 2250 A, EMC level L, air-cooled AC drive, 12-pulse supply
ORDER TYPE CODE MOTOR SHAFT POWER AND CURRENT SIZE/PROT. DIMENSIONS WEIGHT
High overload Low overload FR/IP W x H x D
P [kW] I(H) I(overload) P [kW] I(L) [mm] [kg]
NXC22506A2L0TSFA1A2+ODU+ICB+AMO+TUP* 1800 1900 2782 2000 2250 FR14/IP21 2806x2275x605 2300
NXC22506A5L0TSFA1A2+ODU+ICB+AMO+TUP* 1800 1900 2782 2000 2250 FR14/IP54 2806x2405x605 2330
+ODU (du/dt filter), +ICB (MCCB), +AMO (ICB motor operator), +TUP INCLUDED AS STANDARD **
* max. 35 C ambient temperature
I(H) = nominal current for 150% overload requirement (at max. 40°C ambient temperature)
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature)
I(overload) = maximum 1 min/10 min overload current (high overload)
Vacon NXC Options DESCRIPTION NOTE
+ACH Cabinet heater 50 W 1 x 50 W, requires +TUP **
+ACL Cabinet light Requires +TUP **
+CIT Cabling Input Top Including +CIT/+COT (W:+400 mm)
+DCM Analog meter + curr.trafo CT on L1
+DVM Analog V-meter + sel.sw. For main voltages
+GPL 100 mm base/plinth For basic drive ***
+OCM Common mode chokes To be put on motor cable
+OSI Sine wave filter **** W: +2x800 mm
** IF UNIT ORDERED WITHOUT CONTROL VOLTAGE TRANSFORMER (ATx), THIS OPTION REQUIRES EXTERNAL 230 V SUPPLY
*** NOTE THAT THE OPTIONS THAT AFFECTS ON THE WIDHT OF THE CABINET REQUIRES AN EXTRA +GPL (see NXC common options on page 87)
****PLEASE CHECK THE AVAILABILITY FROM THE FACTORY
Vacon NXC 525-690 V, 2250 A, EMC level T, air-cooled AC drive, 12-pulse supply
The prices are the same as L level ones.
Replace the L by T in the order typecode.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 101

Vacon Plc
AC drive
VACON PLC
Common Options for Vacon NXC
Auxiliary Equipment (A-Group)
+AAA Aux. contact (for +ATx supervision) Wired to DIN3
+AAC Aux. contact (for +Ixx options) Wired to DIN3, mounted on ICO if ordered, otherwise on other input device
+AAI Analog signal isolator Order: 1st AI1, 2nd AO, 3rd AI2
+ACR Control relay wired to DO1, If > 3pcs then FR13 requires +G40 (widht +400mm) or +CIT/+COT
+ACS 230 VAC customer socket requires +TUP
+ADC Power supply 24 VDC, 2,5 A 24 VDC to control, requires +TUP
+AMB Mech. brake control 400 V, 4 kVA, to RO2, FR13 requires +G40 (widht +400mm) or +CIT/+COT, requires +TUP
+AMF Motor fan control 400 V, 4kVA, to RO1, FR13 requires +G40 (widht +400mm) or +CIT/+COT, requires +TUP
+AMH Motor heater feeder 230 V, 10A, to RO1, requires +TUP
+AT1 Aux.trafo 200 VA 400 V* or 690 V */230 V requires +TUP, not with +ICB or +ICO
+AT2 Aux.trafo 750 VA 400 V* or 690 V* /230 V requires +TUP, AT2 is minimum size for +ICO and +ICB
+AT3 Aux.trafo 2500 VA 400 V* or 690 V* /230 V requires +TUP
+AT4 Aux.trafo 4000 VA 400 V* or 690 V* /230 V requires +TUP and FR13 requires +G40 (widht +400mm) or +CIT/+COT
* If other voltage used please indicate for correct tapping
Door Mounted (D-Group)
+DAM Analog meter (AO1) Wired to AO1
+DAR Potentiometer for ref. Wired to AIN1
+DCO MC operation switch Wired to ICO if mounted, otherwise to Tlx, requires +TUP
+DEP Emergency push button Wired to EMS-relay if mounted, otherwise to Tlx, requires +TUP
+DLD Pilot light (DO1) Wired to DO1
+DLF Pilot light (FLT) Wired to RO2, requires +TUP
+DLR Pilot light (RUN) Wired to RO1, requires +TUP
+DLV Pilot light (control voltage on) Requires +TUP
+DRO Local/Remote op. switch Wired to DIN6, requires Local/Remote Application
+DRP Reset push button Wired to DIN6
External Terminals (T-Group)
+TIO 35 pcs I/O Terminal For A1/A8/A9 and A2/A3/AF boards, not with Bx boards
+TID 70 pcs I/O Terminal For A1/A8/A9 and A2/A3/AF and B1, B2, B4 and B5 boards
+TUP Separate 230 VAC term.
General (G-Group)
+G40 400 mm empty cabinet Empty section
+G60 600 mm empty cabinet Empty section
+G80 800 mm empty cabinet Empty section
+GPL 100 mm base/plinth For each G40/G60/G80, (H: +100 mm)
Protection Devices (P-Group)
+PES Em. stop (cat 0) Not with PED, requires TUP, FR13 requires +G40 (widht +400 mm) or +CIT/+COT
+PED Em. stop (cat 1) Not with PES, requires TUP, FR13 requires +G40 (widht +400 mm) or +CIT/+COT
+PTR Thermistor relay PTB approved, requires +TUP
+PAP Arc protection system Includes two ARC sensors, requires +TUP and FR13 requires +G40 (widht +400 mm) or +CIT/+COT
+PIF Insulation fault sensor For IT networks, requires +TUP and FR13 requires +G40 (widht +400 mm) or +CIT/+COT
Seaworthy packing
FR10
FR11
FR12
FR13
FR14
Price for extra cabin
Price for standard NXC
Price for standard NXC
Price for standard NXC
Price for standard NXC
Price for standard NXC
Added for all options that affects to the widht of the cabin
Control unit enclosure for Vacon NXC
ORDER TYPE CODE SUITABILITY DESCRIPTION
NXC__________N NXC IP54 Control unit enclosure for OPT-AF option board, standard *
NXC__________O NXC IP54 Control unit enclosure for OPT-AF option board, all circuit boards in the unit varnished *
* It is required that the control unit or the whole drive is IP54 when OPT-AF board is used
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 102

Vacon Plc
AC drive
VACON PLC
Vacon NXP-line 400-500 VAC, IP00, EMC-level N/T, LIQUID COOLED FC, 6-Pulse with AC-Chokes
ORDER TYPE CODE DRIVE OUTPUT MOTOR POWER LOSS SIZE/PROT. DIMENSIONS WEIGHT
Current
Apparent power kVA **Motor shaft power c/a/T*) CH/IP W x H x D kg
Thermal Rated Rated 400Vac 500Vac 400Vac 500Vac [kW]
ITH IL IH IL IL Ith / IL Ith / IL
[A] [A] [A] [kVA] [kVA] [kW] [kW]
NXP00165A0N1SWSA1A2 16 15 11 10 12 8,3 / 7,5 10 / 9 0,4/0,2/0,6 CH3/IP00 160x431x240 30
NXP00225A0N1SWSA1A2 22 20 15 13 16 11 / 10 14 / 12 0,5/0,2/0,7 CH3/IP00 160x431x240 30
NXP00315A0N1SWSA1A2 31 28 21 18 23 16 / 14 20 / 18 0,7/0,2/0,9 CH3/IP00 160x431x240 30
NXP00385A0N1SWSA1A2 38 35 25 23 29 20 / 18 24 / 22 0,8/0,2/1,0 CH3/IP00 160x431x240 30
NXP00455A0N1SWSA1A2 45 41 30 27 34 23 / 21 29 / 26 1,0/0,3/1,3 CH3/IP00 160x431x240 30
NXP00615A0N1SWSA1A2 61 55 41 36 45 32 / 29 39 / 36 1,3/0,3/1,5 CH3/IP00 160x431x240 30
NXP00725A0N0SWSA1A2 72 65 48 43 53 37 / 34 46 / 42 1,2/0,3/1,5 CH4/IP00 190x493x258 35
NXP00875A0N0SWSA1A2 87 79 58 52 65 45 / 41 56 / 51 1,5/0,3/1,8 CH4/IP00 190x493x258 35
NXP01055A0N0SWSA1A2 105 95 70 63 78 55 / 50 68 / 62 1,8/0,3/2,1 CH4/IP00 190x493x258 35
NXP01405A0N0SWSA1A2 140 127 93 84 104 73 / 66 90 / 82 2,3/0,3/2,6 CH4/IP00 190x493x258 35
NXP01685A0N0SWSA1A2 168 153 112 101 126 87 / 75 110 / 90 4,0/0,4/4,4 CH5/IP00 246x553x264 40
NXP02055A0N0SWSA1A2 205 186 137 122 153 110 / 90 125 / 110 5,0/0,5/5,5 CH5/IP00 246x553x264 40
NXP02615A0N0SWSA1A2 261 237 174 156 195 125 / 110 175 / 150 6,0/0,5/6,5 CH5/IP00 246x553x264 40
NXP03005A0N0SWFA1A2 300 273 200 180 225 150 / 125 200 / 175 7,0/0,6/7,6 CH61/IP00 246x658x374 55
NXP03855A0N0SWFA1A2 385 350 257 230 288 200 / 175 250 / 225 9,0/0,7/9,7 CH61/IP00 246x658x374 55
NXP04605A0N0SWFA1A2 460 418 307 275 344 225 / 200 300 / 275 6,5/0,5/7,0 CH72/IP00 246x1076x372 90
NXP05205A0N0SWFA1A2 520 473 347 311 389 275 / 225 325 / 300 7,5/0,6/8,1 CH72/IP00 246x1076x372 90
NXP05905A0N0SWFA1A2 590 536 393 353 441 300 / 275 375 / 350 9,0/0,7/9,7 CH72/IP00 246x1076x372 90
NXP06505A0N0SWFA1A2 650 591 433 389 486 325 / 300 425 / 375 10,0/0,7/10,7 CH72/IP00 246x1076x372 90
NXP07305A0N0SWFA1A2 730 664 487 437 546 375 / 325 475 / 425 12,0/0,8/12,8 CH72/IP00 246x1076x372 90
NXP08205A0N0SWFA1A2 820 745 547 490 613 425 / 375 525 / 475 12,5/0,8/13,3 CH63/IP00 492x658x380 120
NXP09205A0N0SWFA1A2 920 836 613 550 688 475 / 425 600 / 525 14,4/0,9/15,3 CH63/IP00 492x658x380 120
NXP10305A0N0SWFA1A2 1030 936 687 616 770 525 / 475 650 / 600 16,5/1,0/17,5 CH63/IP00 492x658x380 120
NXP11505A0N0SWFA1A2 1150 1045 767 688 860 600 / 525 750 / 675 18,5/1,0/18,8 CH63/IP00 492x658x380 120
NXP13705A0N0SWFA1A2 1370 1245 913 819 1024 700 / 625 875 / 800 19,0/1,2/20,2 CH74/IP00 746x1124x370 280
NXP16405A0N0SWFA1A2 1640 1491 1093 981 1227 850 / 775 1050 / 950 24,0/1,4/25,4 CH74/IP00 746x1124x370 280
NXP20605A0N0SWFA1A2 2060 1873 1373 1233 1541 1050 / 950 1325 / 1200 32,5/1,8/34,3 CH74/IP00 746x1124x370 280
NXP23005A0N0SWFA1A2 2300 2091 1533 1376 1720 1200 / 1075 1475 / 1350 36,3/2,0/38,3 CH74/IP00 746x1124x370 280
NXP24705A0N0SWFA1A2 2470 2245 1647 1478 1847 1275 / 1150 1600 / 1450 38,8/2,2/41,0 2xCH74/IP00 2x(746x1124x370) 560
NXP29505A0N0SWFA1A2 2950 2681 1967 1765 2206 1525 / 1375 1900 / 1725 46,3/2,6/48,9 2xCH74/IP00 2x(746x1124x370) 560
NXP37105A0N0SWFA1A2 3710 3372 2473 2219 2774 1925 / 1750 2400 / 2175 58,2/3,0/61,2 2xCH74/IP00 2x(746x1124x370) 560
NXP41405A0N0SWFA1A2 4140 3763 2760 2477 3096 2150 / 1950 2650 / 2425 65,0/3,6/68,6 2xCH74/IP00 2x(746x1124x370) 560
** kW VALUES WITH MOTOR PARAMETERS Cosf=0,83 and EFFICIENCY= 95 %
*) C = POWER LOSS INTO COOLANT, A = POWER LOSS INTO AIR, T = TOTAL POWER LOSS.
IF SOME OTHER MAINS VOLTAGE IS USED, APPLY THE FORMULA P = √( 3 x Un x I L) TO CALCULATE THE NX LIQUID COOLED DRIVE OUTPUT APPARENT POWER [kVA].
THE ENCLOSURE CLASS FOR ALL NX LIQUID COOLED AC driveS IS IP00.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com #

Vacon Plc
AC drive
VACON PLC
Vacon NXP-line 400-500 VAC, IP00, EMC-level N/T, LIQUID COOLED FC, 12-Pulse with AC-Chokes
ORDER TYPE CODE DRIVE OUTPUT MOTOR POWER LOSS SIZE/PROT. DIMENSIONS WEIGHT
Current
Apparent power kVA **Motor shaft power c/a/T*) CH/IP W x H x D kg
Thermal Rated Rated 400Vac 500Vac 400Vac 500Vac [kW]
I TH I L I H I L I L I th / I L I th / I L
[A] [A] [A] [kVA] [kVA] [kW] [kW]
NXP04605A0N0TWFA1A2 460 418 307 275 344 225 / 200 300 / 275 6,5/0,5/7,0 CH72/IP00 246x1076x372 90
NXP05205A0N0TWFA1A2 520 473 347 311 389 275 / 225 325 / 300 7,5/0,6/8,1 CH72/IP00 246x1076x372 90
NXP05905A0N0TWFA1A2 590 536 393 353 441 300 / 275 375 / 350 9,0/0,7/9,7 CH72/IP00 246x1076x372 90
NXP06505A0N0TWFA1A2 650 591 433 389 486 325 / 300 425 / 375 10,0/0,7/10,7 CH72/IP00 246x1076x372 90
NXP07305A0N0TWFA1A2 730 664 487 437 546 375 / 325 475 / 425 12,0/0,8/12,8 CH72/IP00 246x1076x372 90
NXP13705A0N0TWFA1A2 1370 1245 913 819 1024 700 / 625 875 / 800 19,0/1,2/20,2 CH74/IP00 746x1124x370 280
NXP16405A0N0TWFA1A2 1640 1491 1093 981 1227 850 / 775 1050 / 950 24,0/1,4/25,4 CH74/IP00 746x1124x370 280
NXP20605A0N0TWFA1A2 2060 1873 1373 1233 1541 1050 / 950 1325 / 1200 32,5/1,8/34,3 CH74/IP00 746x1124x370 280
NXP24705A0N0TWFA1A2 2470 2245 1647 1478 1847 1275 / 1150 1600 / 1450 38,8/2,2/41,0 2xCH74/IP00 2x(746x1124x370) 560
NXP29505A0N0TWFA1A2 2950 2681 1967 1765 2206 1525 / 1375 1900 / 1725 46,3/2,6/48,9 2xCH74/IP00 2x(746x1124x370) 560
NXP37105A0N0TWFA1A2 3710 3372 2473 2219 2774 1925 / 1750 2400 / 2175 58,2/3,0/61,2 2xCH74/IP00 2x(746x1124x370) 560
NXP41405A0N0TWFA1A2 4140 3763 2760 2477 3096 2150 / 1950 2650 / 2425 65,0/3,6/68,6 2xCH74/IP00 2x(746x1124x370) 560
** kW VALUES WITH MOTOR PARAMETERS Cosf=0,83 and EFFICIENCY= 95 %
*) C = POWER LOSS INTO COOLANT, A = POWER LOSS INTO AIR, T = TOTAL POWER LOSS.
IF SOME OTHER MAINS VOLTAGE IS USED, APPLY THE FORMULA P = √( 3 x Un x I L) TO CALCULATE THE NX LIQUID COOLED DRIVE OUTPUT APPARENT POWER [kVA].
THE ENCLOSURE CLASS FOR ALL NX LIQUID COOLED AC driveS IS IP00.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com #

Vacon Plc
AC drive
VACON PLC
Vacon NXP-line 465-800 VDC, IP00, EMC-level T, LIQUID COOLED INVERTER
ORDER TYPE CODE DRIVE OUTPUT MOTOR POWER LOSS SIZE/PROT. DIMENSIONS WEIGHT
Current
Apparent power kVA **Motor shaft power c/a/T*) CH/IP W x H x D kg
Thermal Rated Rated 540Vdc 675Vdc 540Vdc 675Vdc [kW]
I TH I L I H I L I L I th / I L I th / I L
[A] [A] [A] [kVA] [kVA] [kW] [kW]
NXP00165A0T1IWSA1A2 16 15 11 10 12 8,3 / 7,5 10 / 9 0,4/10,2/0,6 CH3/IP00 160x431x244 30
NXP00225A0T1IWSA1A2 22 20 15 13 16 11 / 10 14 / 12 0,5/0,2/0,7 CH3/IP00 160x431x244 30
NXP00315A0T1IWSA1A2 31 28 21 18 23 16 / 14 20 / 18 0,7/0,2/0,9 CH3/IP00 160x431x244 30
NXP00385A0T1IWSA1A2 38 35 25 23 29 20 / 18 24 / 22 0,8/0,2/1,0 CH3/IP00 160x431x244 30
NXP00455A0T1IWSA1A2 45 41 30 27 34 23 / 21 29 / 26 1,0/0,3/1,3 CH3/IP00 160x431x244 30
NXP00615A0T1IWSA1A2 61 55 41 36 45 32 / 29 39 / 36 1,3/0,3/1,5 CH3/IP00 160x431x244 30
NXP00725A0T0IWSA1A2 72 65 48 43 53 37 / 34 46 / 42 1,2/0,3/1,5 CH4/IP00 208x493x258 35
NXP00875A0T0IWSA1A2 87 79 58 52 65 45 / 41 56 / 51 1,5/0,3/1,8 CH4/IP00 208x493x258 35
NXP01055A0T0IWSA1A2 105 95 70 63 78 55 / 50 68 / 62 1,8/0,3/2,1 CH4/IP00 208x493x258 35
NXP01405A0T0IWSA1A2 140 127 93 84 104 73 / 66 90 / 82 2,3/0,3/2,6 CH4/IP00 208x493x258 35
NXP01685A0T0IWSA1A2 168 153 112 101 126 87 / 75 110 / 90 2,5/0,3/2,8 CH5/IP00 246x553x264 40
NXP02055A0T0IWSA1A2 205 186 137 122 153 110 / 90 125 / 110 3,0/0,4/3,4 CH5/IP00 246x553x264 40
NXP02615A0T0IWSA1A2 261 237 174 156 195 125 / 110 175 / 150 4,0/0,4/4,4 CH5/IP00 246x553x264 40
NXP03005A0T0IWFA1A2 300 273 200 180 225 150 / 125 200 / 175 4,5/0,4/4,9 CH61/IP00 246x553x232 55
NXP03855A0T0IWFA1A2 385 350 257 230 288 200 / 175 250 / 225 5,5/0,5/6,0 CH61/IP00 246x658x374 55
NXP04605A0T0IWFA1A2 460 418 307 275 344 225 / 200 300 / 275 5,5/0,5/6,0 CH62/IP00 246x658x374 55
NXP05205A0T0IWFA1A2 520 473 347 311 389 275 / 225 325 / 300 6,5/0,5/7,0 CH62/IP00 246x658x374 55
NXP05905A0T0IWFA1A2 590 536 393 353 441 300 / 275 375 / 350 7,5/0,6/8,1 CH62/IP00 246x658x374 55
NXP06505A0T0IWFA1A2 650 591 433 389 486 325 / 300 425 / 375 8,5/0,6/9,1 CH62/IP00 246x658x374 55
NXP07305A0T0IWFA1A2 730 664 487 437 546 375 / 325 475 / 425 10,0/0,7/10,7 CH62/IP00 246x658x374 55
NXP08205A0T0IWFA1A2 820 745 547 490 613 425 / 375 525 / 475 10,0/0,7/10,7 CH63/IP00 492x658x380 120
NXP09205A0T0IWFA1A2 920 836 613 550 688 475 / 425 600 / 525 12,4/0,8/12,4 CH63/IP00 492x658x380 120
NXP10305A0T0IWFA1A2 1030 936 687 616 770 525 / 475 650 / 600 13,5/0,9/14,4 CH63/IP00 492x658x380 120
NXP11505A0T0IWFA1A2 1150 1045 767 688 860 600 / 525 750 / 675 16,0/1,0/17,0 CH63/IP00 492x658x380 120
NXP13705A0T0IWFA1A2 1370 1245 913 819 1024 700 / 625 875 / 800 15,5/1,0/16,5 CH64/IP00 738x658x374 180
NXP16405A0T0IWFA1A2 1640 1491 1093 981 1227 850 / 775 1050 / 950 19,5/1,2/20,7 CH64/IP00 738x658x374 180
NXP20605A0T0IWFA1A2 2060 1873 1373 1233 1541 1050 / 950 1325 / 1200 26,5/1,5/28,0 CH64/IP00 738x658x374 180
NXP23005A0T0IWFA1A2 2300 2091 1533 1376 1720 1200 / 1075 1475 / 1350 34,0/1,8/35,8 CH64/IP00 738x658x374 180
NXP24705A0N0IWFA1A2 2470 2245 1647 1478 1847 1275 / 1150 1600 / 1450 36,0/2,0/38,0 2xCH64/IP00 2x(738x658x374) 360
NXP29505A0N0IWFA1A2 2950 2681 1967 1765 2206 1525 / 1375 1900 / 1725 39,0/2,4/41,4 2xCH64/IP00 2x(738x658x374) 360
NXP37105A0N0IWFA1A2 3710 3372 2473 2219 2774 1925 / 1750 2400 / 2175 48,0/2,7/50,7 2xCH64/IP00 2x(738x658x374) 360
NXP41405A0N0IWFA1A2 4140 3763 2760 2477 3096 2150 / 1950 2650 / 2425 53,0/3,0/66,0 2xCH64/IP00 2x(738x658x374) 360
** kW VALUES WITH MOTOR PARAMETERS Cosf=0,83 and EFFICIENCY= 95 %
*) C = POWER LOSS INTO COOLANT, A = POWER LOSS INTO AIR, T = TOTAL POWER LOSS.
IF SOME OTHER MAINS VOLTAGE IS USED, APPLY THE FORMULA DC
P = (Un/1,35)* √(3 * l L) TO CALCULATE THE NX LIQUID COOLED DRIVE ELECTRICAL OUTPUT APPARENT POWER [kVA].
THE VOLTAGE CLASSES FOR THE INVERTER UNITS USED IN THE TABLES ABOVE HAVE BEEN DEFINED AS FOLLOWS:'
INPUT 540VDC = RECTIFIED 400VAC SUPPLY
INPUT 675VDC = RECTIFIED 500VAC SUPPLY
THE ENCLOSURE CLASS FOR ALL NX LIQUID COOLED AC driveS IS IP00.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com #

Vacon Plc
AC drive
VACON PLC
Vacon NXP-line 525-690 VAC, IP00, EMC-level N/T, LIQUID COOLED FC, 6-Pulse with AC-Chokes
ORDER TYPE CODE DRIVE OUTPUT MOTOR POWER LOSS SIZE/PROT. DIMENSIONS WEIGHT
Current
Apparent power kVA **Motor shaft power c/a/T*) CH/IP W x H x D kg
Thermal Rated Rated 525Vac 690Vac 525Vac 690Vac [kW]
I TH I L I H I L I L I th / I L I th / I L
[A] [A] [A] [kVA] [kVA] [kW] [kW]
NXP01706A0T0SWFA1A2 170 155 113 141 185 110 / 100 150 / 125 7,5/0,4/7,9 CH61/IP00 246X658X374 55
NXP02086A0T0SWFA1A2 208 189 139 172 226 140 / 125 175 / 150 9,0/0,5/9,5 CH61/IP00 246X658X374 55
NXP02616A0T0SWFA1A2 261 237 174 216 284 175 / 160 225 / 200 6,5/0,3/6,8 CH61/IP00 246X1076X372 90
NXP03256A0T0SWFA1A2 325 295 217 269 353 225 / 200 275 / 250 7,5/0,4/7,9 CH72/IP00 246X1076X373 90
NXP03856A0T0SWFA1A2 385 350 257 318 418 250 / 225 350 / 300 9,0/0,5/9,5 CH72/IP00 246X1076X374 90
NXP04166A0T0SWFA1A2 416 378 277 344 452 275 / 250 375 / 325 9,4/0,5/9,9 CH72/IP00 246X1076X375 90
NXP04606A0T0SWFA1A2 460 418 307 380 500 315 / 275 400 / 350 10,0/0,5/10,5 CH72/IP00 246X1076X376 90
NXP05026A0T0SWFA1A2 502 456 335 415 545 325 / 300 450 / 400 12,0/0,6/12,6 CH72/IP00 246X1076X377 90
NXP05906A0T0SWFA1A2 590 536 393 488 641 400 / 350 525 / 475 13,0/0,7/13,7 CH63/IP00 492X658X380 120
NXP06506A0T0SWFA1A2 650 591 433 537 706 450 / 400 575 / 525 16,0/0,8/16,8 CH63/IP00 492X658X380 120
NXP07506A0T0SWFA1A2 750 682 500 620 815 500 / 450 675 / 600 18,0/0,9/18,9 CH63/IP00 492X658X380 120
NXP08206A0T0SWFA1A2 820 745 547 678 891 550 / 500 725 / 650 19,0/1,0/20,0 CH74/IP00 746X1124X370 280
NXP09206A0T0SWFA1A2 920 836 613 761 1000 625 / 575 825 / 750 20,0/1,0/21,4 CH74/IP00 746X1124X370 280
NXP10306A0T0SWFA1A2 1030 936 687 851 1119 700 / 625 925 / 825 22,0/1,1/23,1 CH74/IP00 746X1124X370 280
NXP11806A0T0SWFA1A2 1180 1073 787 975 1282 800 / 725 1050 / 950 25,0/1,3/26,3 CH74/IP00 746X1124X370 280
NXP13006A0T0SWFA1A2 1300 1182 867 1075 1412 875 / 800 1150 / 1050 31,0/1,6/32,6 CH74/IP00 746X1124X370 280
NXP15006A0T0SWFA1A2 1500 1364 1000 1240 1630 1000 / 925 1350 / 1225 38,0/1,9/39,9 CH74/IP00 746X1124X370 280
NXP17006A0T0SWFA1A2 1700 1545 1133 1405 1847 1100 / 1000 1500 / 1375 38,0/1,9/39,9 CH74/IP00 746X1124X370 280
NXP18506A0T0SWFA1A2 1850 1682 1233 1529 2010 1250 / 1150 1650 / 1500 39,6/2,0/41,6 2xCH74/IP00 2x(746X1124X370) 560
NXP21206A0T0SWFA1A2 2120 1927 1413 1753 2303 1420 / 1300 1900 / 1725 45,0/2,4/47,4 2xCH74/IP00 2x(746X1124X370) 560
NXP23406A0T0SWFA1A2 2340 2127 1560 1934 2542 1575 / 1450 2100 / 1900 55,8/2,9/58,7 2xCH74/IP00 2x(746X1124X370) 560
NXP27006A0T0SWFA1A2 2700 2455 1800 2232 2933 1825 / 1675 2400 / 2200 68,4/3,4/71,8 2xCH74/IP00 2x(746X1124X370) 560
NXP31006A0T0SWFA1A2 3100 2818 2067 2563 3368 2075 / 1925 2750 / 2500 68,4/3,4/71,8 2xCH74/IP00 2x(746X1124X370) 560
Vacon NXP-line 525-690 VAC, IP00, EMC-level N/T, LIQUID COOLED FC, 12-Pulse with AC-Chokes
ORDER TYPE CODE DRIVE OUTPUT MOTOR POWER LOSS SIZE/PROT. DIMENSIONS WEIGHT
Current Apparent power kVA **Motor shaft power c/a/T*) CH/IP W x H x D kg
Thermal Rated Rated 525Vac 690Vac 525Vac 690Vac [kW]
I TH I L I H I L I L I th / I L I th / I L
[A] [A] [A] [kVA] [kVA] [kW] [kW]
NXP03256A0T0TWFA1A2 325 295 217 269 353 225 / 200 275 / 250 7,5/0,4/7,9 CH72/IP00 246X1076X373 90
NXP03856A0T0TWFA1A2 385 350 257 318 418 250 / 225 350 / 300 9,0/0,5/9,5 CH72/IP00 246X1076X374 90
NXP04166A0T0TWFA1A2 416 378 277 344 452 275 / 250 375 / 325 9,4/0,5/9,9 CH72/IP00 246X1076X375 90
NXP04606A0T0TWFA1A2 460 418 307 380 500 315 / 275 400 / 350 10,0/0,5/10,5 CH72/IP00 246X1076X376 90
NXP05026A0T0TWFA1A2 502 456 335 415 545 325 / 300 450 / 400 12,0/0,6/12,6 CH72/IP00 246X1076X377 90
NXP08206A0T0TWFA1A2 820 745 547 678 891 550 / 500 725 / 650 19,0/1,0/20,0 CH74/IP00 746X1124X370 280
NXP09206A0T0TWFA1A2 920 836 613 761 1000 625 / 575 825 / 750 20,0/1,0/21,4 CH74/IP00 746X1124X370 280
NXP10306A0T0TWFA1A2 1030 936 687 851 1119 700 / 625 925 / 825 22,0/1,1/23,1 CH74/IP00 746X1124X370 280
NXP11806A0T0TWFA1A2 1180 1073 787 975 1282 800 / 725 1050 / 950 25,0/1,3/26,3 CH74/IP00 746X1124X370 280
NXP13006A0T0TWFA1A2 1300 1182 867 1075 1412 875 / 800 1150 / 1050 31,0/1,6/32,6 CH74/IP00 746X1124X370 280
NXP15006A0T0TWFA1A2 1500 1364 1000 1240 1630 1000 / 925 1350 / 1225 38,0/1,9/39,9 CH74/IP00 746X1124X370 280
NXP17006A0T0TWFA1A2 1700 1545 1133 1405 1847 1100 / 1000 1500 / 1375 38,0/1,9/39,9 CH74/IP00 746X1124X370 280
NXP18506A0T0TWFA1A2 1850 1682 1233 1529 2010 1250 / 1150 1650 / 1500 39,6/2,0/41,6 2xCH74/IP00 2x(746X1124X370) 560
NXP21206A0T0TWFA1A2 2120 1927 1413 1753 2303 1420 / 1300 1900 / 1725 45,0/2,4/47,4 2xCH74/IP00 2x(746X1124X370) 560
NXP23406A0T0TWFA1A2 2340 2127 1560 1934 2542 1575 / 1450 2100 / 1900 55,8/2,9/58,7 2xCH74/IP00 2x(746X1124X370) 560
NXP27006A0T0TWFA1A2 2700 2455 1800 2232 2933 1825 / 1675 2400 / 2200 68,4/3,4/71,8 2xCH74/IP00 2x(746X1124X370) 560
NXP31006A0T0TWFA1A2 3100 2818 2067 2563 3368 2075 / 1925 2750 / 2500 68,4/3,4/71,8 2xCH74/IP00 2x(746X1124X370) 560
** kW VALUES WITH MOTOR PARAMETERS Cosf=0,83 and EFFICIENCY= 95 % *) C = POWER LOSS INTO COOLANT, A = POWER LOSS INTO AIR, T = TOTAL POWER LOSS.
IF SOME OTHER MAINS VOLTAGE IS USED, APPLY THE FORMULA P = √( 3 x Un x I L) TO CALCULATE THE NX LIQUID COOLED DRIVE OUTPUT APPARENT POWER [kVA].
THE ENCLOSURE CLASS FOR ALL NX LIQUID COOLED AC driveS IS IP00.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com #

Vacon Plc
AC drive
VACON PLC
Vacon NXP-line 640-1100 VDC, IP00, EMC-level T, LIQUID COOLED INVERTER
ORDER TYPE CODE DRIVE OUTPUT MOTOR POWER LOSS SIZE/PROT. DIMENSIONS WEIGHT
Current
Apparent power kVA **Motor shaft power c/a/T*) CH/IP W x H x D kg
Thermal Rated Rated 640Vdc 930Vdc 640Vdc 930Vdc [kW]
I TH I L I H I L I L I th / I L I th / I L
[A] [A] [A] [kVA] [kVA] [kW] [kW]
NXP01706A0T0IWFA1A2 170 155 113 141 185 110 / 100 150 / 125 4,5/0,2/4,7 CH61/IP00 246X658X374 55
NXP02086A0T0IWFA1A2 208 189 139 172 226 140 / 125 175 / 150 5,5/0,3/5,8 CH61/IP00 246X658X374 55
NXP02616A0T0IWFA1A2 261 237 174 216 283 175 / 160 225 / 200 5,5/0,3/5,8 CH61/IP00 246X658X374 55
NXP03256A0T0IWFA1A2 325 295 217 268 353 225 / 200 275 / 250 6,5/0,3/6,8 CH62/IP00 246X658X374 55
NXP03856A0T0IWFA1A2 385 350 257 318 418 250 / 225 350 / 300 7,5/0,4/7,9 CH62/IP00 246X658X374 55
NXP04166A0T0IWFA1A2 416 378 277 344 452 275 / 250 375 / 325 8,1/0,4/8,4 CH62/IP00 246X658X374 55
NXP04606A0T0IWFA1A2 460 418 307 380 500 315 / 275 400 / 350 8,5/0,4/8,9 CH62/IP00 246X658X374 55
NXP05026A0T0IWFA1A2 502 456 335 415 545 325 / 300 450 / 400 10,0/0,5/10,5 CH62/IP00 246X658X374 55
NXP05906A0T0IWFA1A2 590 536 393 487 641 400 / 350 525 / 475 10,0/0,5/10,5 CH63/IP00 492X658X380 120
NXP06506A0T0IWFA1A2 650 591 433 537 706 450 / 400 575 / 525 13,5/0,7/14,2 CH63/IP00 492X658X380 120
NXP07506A0T0IWFA1A2 750 682 500 620 815 500 / 450 675 / 600 16,0/0,8/16,8 CH63/IP00 492X658X380 120
NXP08206A0T0IWFA1A2 820 745 547 677 890 550 / 500 725 / 650 16,0/0,8/16,8 CH64/IP00 738X658X374 180
NXP09206A0T0IWFA1A2 920 836 613 760 999 625 / 575 825 / 750 17,8/1,0/18,4 CH64/IP00 738X658X374 180
NXP10306A0T0IWFA1A2 1030 936 687 851 1119 700 / 625 925 / 825 19,0/1,0/20,0 CH64/IP00 738X658X374 180
NXP11806A0T0IWFA1A2 1180 1073 787 976 1282 800 / 725 1050 / 950 21,0/1,1/22,1 CH64/IP00 738X658X374 180
NXP13006A0T0IWFA1A2 1300 1182 867 1075 1413 875 / 800 1150 / 1050 27,0/1,4/28,4 CH64/IP00 738X658X374 180
NXP15006A0T0IWFA1A2 1500 1364 1000 1240 1630 1000 / 925 1350 / 1225 32,0/1,6/33,6 CH64/IP00 738X658X374 180
NXP17006A0T0IWFA1A2 1700 1545 1133 1405 1847 1100 / 1000 1500 / 1375 38,0/1,9/39,9 CH64/IP00 746X1124X370 280
NXP18506A0T0IWFA1A2 1850 1682 1233 1529 2010 1250 / 1150 1650 / 1500 34,2/1,8/36,0 2xCH64/IP00 2x(738X658X374) 360
NXP21206A0T0IWFA1A2 2120 1927 1413 1753 2303 1420 / 1300 1900 / 1725 37,8/2,0/39,8 2xCH64/IP00 2x(738X658X374) 360
NXP23406A0T0IWFA1A2 2340 2127 1560 1934 2542 1575 / 1450 2100 / 1900 48,6/2,5/51,1 2xCH64/IP00 2x(738X658X374) 360
NXP27006A0T0IWFA1A2 2700 2455 1800 2232 2933 1825 / 1675 2400 / 2200 57,6/3,0/60,6 2xCH64/IP00 2x(738X658X374) 360
NXP31006A0T0IWFA1A2 3100 2818 2067 2563 3368 2075 / 1925 2750 / 2500 68,4/3,4/71,8 2xCH64/IP00 2x(746X1124X370) 560
** kW VALUES WITH MOTOR PARAMETERS Cosf=0,83 and EFFICIENCY= 95 %
*) C = POWER LOSS INTO COOLANT, A = POWER LOSS INTO AIR, T = TOTAL POWER LOSS.
IF SOME OTHER MAINS VOLTAGE IS USED, APPLY THE FORMULA DC
P = (Un/1,35)* √(3 * l L) TO CALCULATE THE NX LIQUID COOLED DRIVE ELECTRICAL OUTPUT APPARENT POWER [kVA].
THE VOLTAGE CLASSES FOR THE INVERTER UNITS USED IN THE TABLES ABOVE HAVE BEEN DEFINED AS FOLLOWS:'
INPUT 640VDC = RECTIFIED 525VAC SUPPLY
INPUT 930VDC = RECTIFIED 690VAC SUPPLY
THE ENCLOSURE CLASS FOR ALL NX LIQUID COOLED AC driveS IS IP00.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com #

Vacon Plc
AC drive
VACON PLC
Vacon NXB-line 465-800 VDC, IP00, EMC-level T, LIQUID COOLED EXTERNAL BRAKE CHOPPER
ORDER TYPE CODE DRIVE OUTPUT POWER LOSS SIZE/PROT. DIMENSIONS WEIGHT
Current
Electrical braking power c/a/T*) CH/IP W x H x D kg
Thermal Minimum resistance [kW]
I TH @600Vdc@800Vdc @600Vdc @800Vdc
[A] [Ohm] [Ohm] [kW] [kW]
NXB00315A0T0 8WSA1A2 2x 31 19,5 25,7 37 49 0,7/0,2/0,9 CH3/IP00 160x431x244 30
NXB00615A0T0 8WSA1A2 2x 61 9,9 13,1 73 97 1,3/0,3/1,5 CH3/IP00 160x431x244 30
NXB00875A0T0 8WSA1A2 2x 87 7 9,2 105 138 1,5/0,3/1,8 CH4/IP00 208x493x258 35
NXB01055A0T0 8WSA1A2 2x 105 5,8 7,6 127 167 1,8/0,3/2,1 CH4/IP00 208x493x258 35
NXB01405A0T0 8WSA1A2 2x 140 4,3 5,7 169 223 2,3/0,3/2,6 CH4/IP00 208x493x258 35
NXB01685A0T0 8WSA1A2 2x 168 3,6 4,7 203 267 2,5/0,3/2,8 CH5/IP00 246x553x264 40
NXB02055A0T0 8WSA1A2 2x 205 3 3,9 248 326 3,0/0,4/3,4 CH5/IP00 246x553x264 40
NXB02615A0T0 8WSA1A2 2x 261 2,3 3,1 316 415 4,0/0,4/4,4 CH5/IP00 246x553x264 40
NXB03005A0T0 8WFA1A2 2x 300 2 2,7 363 477 4,5/0,4/4,9 CH61/IP00 246x553x232 55
NXB03855A0T0 8WFA1A2 2x 385 1,6 2,1 466 613 5,5/0,5/6,0 CH61/IP00 246x658x374 55
NXB04605A0T0 8WFA1A2 2x 460 1,3 1,7 556 732 5,5/0,5/6,0 CH62/IP00 246x658x374 55
NXB05205A0T0 8WFA1A2 2x 520 1,2 1,5 629 828 6,5/0,5/7,0 CH62/IP00 246x658x374 55
NXB05905A0T0 8WFA1A2 2x 590 1,1 1,4 714 939 7,5/0,6/8,1 CH62/IP00 246x658x374 55
NXB06505A0T0 8WFA1A2 2x 650 1 1,2 786 1035 8,5/0,6/9,1 CH62/IP00 246x658x374 55
NXB07305A0T0 8WFA1A2 2x 730 0,9 1,1 883 1162 10,0/0,7/10,7 CH62/IP00 246x658x374 55
Vacon NXB-line 640-1100 VDC, IP00, EMC-level T, LIQUID COOLED EXTERNAL BRAKE CHOPPER
ORDER TYPE CODE DRIVE OUTPUT POWER LOSS SIZE/PROT. DIMENSIONS WEIGHT
Current
Electrical braking power c/a/T*) CH/IP W x H x D kg
Thermal Minimum resistance [kW]
I TH @840Vdc1100Vdc @840Vdc @1100Vdc
[A] [Ohm] [Ohm] [kW] [kW]
NXB01706A0T0 8WFA1A2 2x 170 4,9 6,5 282 372 4,5/0,2/4,7 CH61/IP00 246X658X374 55
NXB02086A0T0 8WFA1A2 2x 208 4 5,3 346 456 5,5/0,3/5,8 CH61/IP00 246X658X374 55
NXB02616A0T0 8WFA1A2 2x 261 3,2 4,2 435 572 5,5/0,3/5,8 CH61/IP00 246X658X374 55
NXB03256A0T0 8WFA1A2 2x 325 2,6 3,4 542 713 6,5/0,3/6,8 CH62/IP00 246X658X374 55
NXB03856A0T0 8WFA1A2 2x 385 2,2 2,9 643 845 7,5/0,4/7,9 CH62/IP00 246X658X374 55
NXB04166A0T0 8WFA1A2 2x 416 2 2,6 693 913 8,1/0,4/8,4 CH62/IP00 246X658X374 55
NXB04606A0T0 8WFA1A2 2x 460 1,8 2,4 767 1010 8,5/0,4/8,9 CH62/IP00 246X658X374 55
NXB05026A0T0 8WFA1A2 2x 502 1,7 2,2 838 1100 10,0/0,5/10,5 CH62/IP00 246X658X374 55
Note: The rated currents in given ambient temperatures (+50°C) and coolant temperatures (+30°C) are achieved only when the switching frequency
is equal to or less than the factory default.
Note: Braking power; P break = 2 x U 2 break / R break
Note: max input DC-current; I in_max = P break_max / U break
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com #

Vacon Plc
AC drive
VACON PLC
Vacon NXA-line 465-800 VDC, IP00, EMC-level T, LIQUID COOLED ACTIVE FRONT END
ORDER TYPE CODE AFE INPUT AFE OUTPUT to DC-LINK POWER LOSS SIZE/PROT. DIMENSIONS WEIGHT
Current
Apparent power kVA **Dimensioning Powe c/a/T*) CH/IP W x H x D kg
Thermal Rated Rated 594Vdc 742Vdc 594Vdc 742Vdc [kW]
I TH I L I H I L I L I th / I L I th / I L
[A] [A] [A] [kVA] [kVA] [kW] [kW]
NXA01685A0T0IWSA1A2 168 153 112 114 143 125 / 100 150 / 125 2,5/0,3/2,8 CH5/IP00 246x553x264 40
NXA02055A0T0IWSA1A2 205 186 137 139 174 150 / 125 175 / 150 3,0/0,4/3,4 CH5/IP00 246x553x264 40
NXA02615A0T0IWSA1A2 261 237 174 177 221 200 / 175 225 / 200 4,0/0,4/4,4 CH5/IP00 246x553x264 40
NXA03005A0T0IWFA1A2 300 273 200 204 255 225 / 200 275 / 250 4,5/0,4/4,9 CH61/IP00 246x553x232 55
NXA03855A0T0IWFA1A2 385 350 257 261 327 275 / 250 325 / 300 5,5/0,5/6,0 CH61/IP00 246x658x374 55
NXA04605A0T0IWFA1A2 460 418 307 312 390 325 / 300 400 / 375 5,5/0,5/6,0 CH62/IP00 246x658x374 55
NXA05205A0T0SWSA1A2 520 473 347 353 442 375 / 350 475 / 425 6,5/0,5/7,0 CH62/IP00 246x658x374 55
NXA05905A0T0IWFA1A2 590 536 393 400 500 425 / 375 525 / 475 7,5/0,6/8,1 CH62/IP00 246x658x374 55
NXA06505A0T0IWFA1A2 650 591 433 441 552 475 / 425 575 / 525 8,5/0,6/9,1 CH62/IP00 246x658x374 55
NXA07305A0T0IWFA1A2 730 664 487 496 620 525 / 475 650 / 600 10,0/0,7/10,7 CH62/IP00 246x658x374 55
NXA08205A0T0IWFA1A2 820 745 547 556 696 575 / 525 725 / 675 10,0/0,7/10,7 CH63/IP00 492x658x380 120
NXA09205A0T0IWFA1A2 920 836 613 624 780 650 / 600 825 / 750 12,4/0,8/12,4 CH63/IP00 492x658x380 120
NXA10305A0T0IWFA1A2 1030 936 687 699 874 750 / 675 925 / 850 13,5/0,9/14,4 CH63/IP00 492x658x380 120
NXA11505A0T0IWFA1A2 1150 1045 767 780 976 825 / 750 1025 / 950 16,0/1,0/17,0 CH63/IP00 492x658x380 120
NXA13705A0T0IWFA1A2 1370 1245 913 930 1162 975 / 900 1225 / 1125 15,5/1,0/16,5 CH64/IP00 738x658x374 180
NXA16405A0T0IWFA1A2 1640 1491 1093 1114 1392 1200 / 1100 1500 / 1375 19,5/1,2/20,7 CH64/IP00 738x658x374 180
NXA20605A0T0IWFA1A2 2060 1873 1373 1399 1749 1475 / 1350 1850 / 1700 26,5/1,5/28,0 CH64/IP00 738x658x374 180
NXA23005A0T0IWFA1A2 2300 2091 1533 1562 1952 1650 / 1500 2050 / 1900 34,0/1,8/35,8 CH64/IP00 738x658x374 180
Vacon NXA-line 640-1100 VDC, IP00, EMC-level T, LIQUID COOLED ACTIVE FRONT END
ORDER TYPE CODE AFE INPUT AFE OUTPUT to DC-LINK POWER LOSS SIZE/PROT. DIMENSIONS WEIGHT
Current
Apparent power kVA **Dimensioning Powe c/a/T*) CH/IP W x H x D kg
Thermal Rated Rated 780Vdc 1025Vdc 780Vdc 1025Vdc [kW]
I TH I L I H I L I L I th / I L I th / I L
[A] [A] [A] [kVA] [kVA] [kW] [kW]
NXA01706A0T0IWFA1A2 170 155 113 152 200 175 / 150 200 / 175 4,5/0,2/4,7 CH61/IP00 246X658X374 55
NXA02086A0T0IWFA1A2 208 189 139 185 243 200 / 175 250 / 225 5,5/0,3/5,8 CH61/IP00 246X658X374 55
NXA02616A0T0IWFA1A2 261 237 174 232 305 250 / 225 325 / 300 5,5/0,3/5,8 CH61/IP00 246X658X374 55
NXA03256A0T0IWFA1A2 325 295 217 289 380 300 / 275 400 / 375 6,5/0,3/6,8 CH62/IP00 246X658X374 55
NXA03856A0T0IWFA1A2 385 350 257 343 451 350 / 325 475 / 450 7,5/0,4/7,9 CH62/IP00 246X658X374 55
NXA04166A0T0IWFA1A2 416 378 277 371 487 400 / 350 500 / 475 8,1/0,4/8,4 CH62/IP00 246X658X374 55
NXA04606A0T0IWFA1A2 460 418 307 410 539 450 / 400 575 / 525 8,5/0,4/8,9 CH62/IP00 246X658X374 55
NXA05026A0T0IWFA1A2 502 456 335 447 587 475 / 425 625 / 575 10,0/0,5/10,5 CH62/IP00 246X658X374 55
NXA05906A0T0IWFA1A2 590 536 393 525 691 575 / 525 725 / 675 10,0/0,5/10,5 CH63/IP00 492X658X380 120
NXA06506A0T0IWFA1A2 650 591 433 579 761 625 / 575 825 / 750 13,5/0,7/14,2 CH63/IP00 492X658X380 120
NXA07506A0T0IWFA1A2 750 682 500 669 879 700 / 650 675 / 600 16,0/0,8/16,8 CH63/IP00 492X658X380 120
NXA08206A0T0IWFA1A2 820 745 547 730 960 825 / 725 1000 / 925 16,0/0,8/16,8 CH64/IP00 738X658X374 180
NXA09206A0T0IWFA1A2 920 836 613 819 1077 875 / 800 1150 / 1050 17,8/1,0/18,4 CH64/IP00 738X658X374 180
NXA10306A0T0IWFA1A2 1030 936 687 918 1206 975 / 900 1275 / 1150 19,0/1,0/20,0 CH64/IP00 738X658X374 180
NXA11806A0T0IWFA1A2 1180 1073 787 1052 1382 1125 / 1025 1475 / 1350 21,0/1,1/22,1 CH64/IP00 738X658X374 180
NXA13006A0T0IWFA1A2 1300 1182 867 1159 1523 1225 / 1125 1650 / 1500 27,0/1,4/28,4 CH64/IP00 738X658X374 180
NXA15006A0T0IWFA1A2 1500 1364 1000 1337 1757 1450 / 1325 1900 / 1725 32,0/1,6/33,6 CH64/IP00 738X658X374 180
* Switching freq 3,6kHz
** kW/KkVA VALUES WITH INPUT PARAMETERS TPF=0,98, (Note! On AFE DC-supply terminals)
*) C = POWER LOSS INTO COOLANT, A = POWER LOSS INTO AIR, T = TOTAL POWER LOSS.
IF SOME OTHER MAINS VOLTAGE IS USED, APPLY THE FORMULA P = √( 3 x Un x 1,1 x I L) TO CALCULATE THE NX LIQUID COOLED DRIVE OUTPUT APPARENT POWER [kVA].
THE ENCLOSURE CLASS FOR ALL NX LIQUID COOLED AC driveS IS IP00.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com #

Vacon Plc
AC drive
VACON PLC
VACON NX_OPTIONS Air-Cooled, Naturally convected Regenerative line filters IP00, (LCL)
ORDER TYPE CODE SUITABILITY DESCRIPTION WHD WEIGHT [kg]
REG 410 5 0 P Ch61/500V: 300Aac, 385Aac LCL-filter L1=185kg, L2=62kg
REG 580 5 0 P Ch62/500V: 416Aac, 460Aac, 520Aac LCL-filter L1=195kg, L2=77kg
REG 840 5 0 P Ch62/500V: 590Aac, 650Aac, 730Aac LCL-filter L1=270kg, L2=100kg
REG 1160 5 0 P Ch63/500V: 820...1150Aac LCL-filter L1=390kg, L2=140kg
REG 1480 5 0 P Ch64/500V: 1370Aac LCL-filter L1=470kg, L2=155kg
* L1 AFE side, L2 Grid side Transfer products
VACON NX_OPTIONS Liquid-Cooled Regenerative line filters IP00, (LCL)
ORDER TYPE CODE SUITABILITY DESCRIPTION WHD WEIGHT [kg]
RLC-0385-6-0 Ch62/690V: 325, 385Aac LCL-filter, 2-P
RLC-0520-6-0 Ch62/500-690V LCL-filter, 3-P
RLC-0750-6-0 Ch62/500, Ch63/690V LCL-filter, 3-P
RLC-0920-6-0 Ch63/500, Ch64/690V LCL-filter, 3-P
RLC-1180-6-0 Ch63/500, Ch64/690V LCL-filter, 3-P
RLC-1640-6-0 Ch64/500-690V LCL-filter, 3-P
RLC-2300-5-0 Ch64/500V: 2060, 2300Aac LCL-filter, 2-P
VACON NX_OPTIONS Liquid-Cooled filters
Transfer products
ORDER TYPE CODE SUITABILITY DESCRIPTION WHD WEIGHT [kg]
FER-FGT All Common-mode filter cores D=85mm, l=120mm
mounted on tube
Max cable d=50mm
Transfer products
VACON NX_OPTIONS Pre-Charging Circuit, (Loose components)
ORDER TYPE CODE SUITABILITY DESCRIPTION NOTE
CP01047 All Diode bridge 82/16
PP00066 All Resistor CAV 150C47R
Transfer products
Vacon Liquid Cooled OPTIONS Cooling interface, Spin nuts and fast connectors
ORDER TYPE CODE SUITABILITY DESCRIPTION NOTE
CON-1 CH61, CH62, CH72 Spin nut connection kit, adapter for customer connection 2pc.
CON-2 CH63 Spin nut connection kit, adapter for customer connection 4pc.
CON-3 CH64, CH74 Spin nut connection kit, adapter for customer connection 6pc.
CON-4 CH61, CH62, CH72 TEMA hose kit, Fast connector w anti-dripping valve 2pc.
CON-5 CH63 TEMA hose kit, Fast connector w anti-dripping valve 4pc.
CON-6 CH64, CH74 TEMA hose kit, Fast connector w anti-dripping valve 6pc.
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com #

Vacon Plc
AC drive
VACON PLC
Vacon Liquid Cooled OPTIONS Control - Power unit communication cables
ORDER TYPE CODE SUITABILITY DESCRIPTION NOTE
PP60017 Ch61, Ch62/72, Ch63, Ch64/74 Fiber optic cable set 0,7m
PP60010 Ch61, Ch62/72, Ch63, Ch64/74 Fiber optic cable set 1,5m Standard
PP60016 Ch61, Ch62/72, Ch63, Ch64/74 Fiber optic cable set 3,5m Std when Ch3, Ch4, Ch5 w FIB-1.5
PP13111 Ch61, Ch62/72, Ch63, Ch64/74 Fiber optic cable set 8m
PP12001 2x Ch64/74 Fiber optic cable set 1,8m Power unit 1.
PP12002 2x Ch64/74 Fiber optic cable set 3,8m Power unit 2.
PP13109 2x Ch64/74 Fiber optic cable set 8m Power unit 1.
PP13110 2x Ch64/74 Fiber optic cable set 8m Power unit 2.
PP31001 CH3-CH4 Cable set CU-PU 1,15m
PP51015 CH5 Cable set CU-PU 1,15m
Vacon Liquid Cooled OPTIONS Vaconbus upgrading to fiber optic CH3-CH5
ORDER TYPE CODE SUITABILITY DESCRIPTION NOTE
FIB-1.5 CH3-CH5 Fiber Kit (Boards and cable)
Vacon Liquid Cooled OPTIONS Flow switch
ORDER TYPE CODE SUITABILITY DESCRIPTION NOTE
FW00204 Ch5, Ch6x, Ch7x Flow switch / SIKA VKS 15 M G 1/2", 1pcs Customer cooling system is not
approved by Vacon
transfer products
Vacon Liquid Cooled OPTIONS Cooling Hoses
ORDER TYPE CODE SUITABILITY DESCRIPTION NOTE
Drive end thread
Customer end thread
FW00150 2pcs Lenght 1,5m, indiam. 16mm G3/4" male fixed+Usit-R sealing G1/2" male fixed+Usit-R sealing
FW00151 2pcs Lenght 0,6m, indiam. 19mm G3/4" male fixed+Usit-R sealing G3/4" male fixed+Usit-R sealing
FW00152 2pcs Lenght 1,0m, indiam. 19mm G3/4" male fixed+Usit-R sealing
G3/4" male fixed+Usit-R sealing
FW00157 2pcs Lenght 1,5m, indiam. 19mm G3/4" male fixed+Usit-R sealing
G3/4" female swivel
FW00158, Standard delivery 2pcs Lenght 1,5m, indiam. 16mm Female G1/2" Swivel conical seal G1/2" male fixed+Usit-R sealing
FW00205, Standard delivery 2pcs Al hose adapter 160 x d 32 mm G3/4" male fixed+Usit-R sealing G1/2" male fixed conical sealing
FW00208 2pcs Al hose adapter 160 x d 32 mm G3/4" male fixed+Usit-R sealing G3/4" male fixed conical sealing
*all threads ISO 228-1 transfer products
Vacon Liquid Cooled OPTIONS Varnished PCB's
ORDER TYPE CODE SUITABILITY DESCRIPTION NOTE
NX________xxV Ch3-Ch5 Varnished printed circuit boards Ch3, Ch4, Ch5
NX________xxG or xxV Ch61, Ch62, Ch72 Varnished printed circuit boards Ch61, Ch62, Ch72
NX________xxG or xxV Ch63 Varnished printed circuit boards Ch63
NX________xxG or xxV Ch64, Ch74 Varnished printed circuit boards Ch64, Ch74
NX________xxG or xxV 2xCh64, 2xCh74 Varnished printed circuit boards 2xCh64, 2xCh74
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com #

Vacon Plc
AC drive
VACON PLC
Vacon Liquid Cooled OPTIONS AC-Chokes price reduction
ORDER TYPE CODE SUITABILITY DESCRIPTION NOTE
Ch5 500V 6-P Ch5 500V AC-Chokes price reduction
Ch63 500V 6-P Ch63 500V AC-Chokes price reduction
Ch72 500V 12-P Ch72 500V AC-Chokes price reduction
Ch74 500V 12-P Ch74 500V AC-Chokes price reduction
2x Ch74 500V 12-P 2x Ch74 500V AC-Chokes price reduction
Ch72 690V 12-P Ch72 690V AC-Chokes price reduction
Ch74 690V 12-P Ch74 690V AC-Chokes price reduction
2x Ch74 690V 12-P 2x Ch74 690V AC-Chokes price reduction
Vacon Liquid Cooled OPTIONS Heat exchangers
ORDER TYPE CODE SUITABILITY DESCRIPTION NOTE
HXL-M-040-N-P up to 40kW, 120 l/min IP00 heat exchanger PVC-C piping
HXL-M-120-N-P up to 120kW, 360 l/min IP00 heat exchanger PVC-C piping
HXM-M-120-N-P up to 120kW, 360 l/min IP00 heat exchanger PVC-C piping
HXL-M-120-N-S up to 120kW, 360 l/min IP00 heat exchanger Stainless steel piping
HXL-R-040-N-P up to 40kW, 120 l/min Rittal TS8 Heat exchanger installed into IP54-cabinet IP54
HXL-R-120-N-P up to 120kW, 360 l/min Rittal TS8 Heat exchanger installed into IP54-cabinet IP54
HXM-R-120-N-P up to 120kW, 360 l/min Rittal TS8 Heat exchanger installed into IP54-cabinet IP54
HXL-V-040-N-P up to 40kW, 120 l/min Veda Heat exchanger installed into IP54-cabinet IP54
HXL-V-120-N-P up to 120kW, 360 l/min Veda Heat exchanger installed into IP54-cabinet IP54
HXM-V-120-N-P up to 120kW, 360 l/min Veda Heat exchanger installed into IP54-cabinet IP54
Flanges, Thread pipes, Manifolds, Inhibitors
HXL040-P003-1 Flange (1pcs) for HXL-040 with interface pipe Flange, tube collar, sealing, bolts & nuts DN25 / l=183mm
HX_120-P003-1 FlangeA (1pcs) for HXL-120 with interface pipe Flange, tube collar, sealing, bolts & nuts DN50 / l=194mm
HX_120-P003-2 FlangeB (1pcs) for HXL-120 with interface pipe Flange, tube collar, sealing, bolts & nuts DN50 / l=279mm
HX_120-P003-5 Thread pipe (1pcs) for HXL-120 thread interface Both ends with threads D63mm / l=124mm
HX_-P003-6 In/Out Manifold (1pcs) HXL040&HXL120, DN50 distribution No of interfaces 5pcs, 1/2" thread PVC-C, D63mm / l=700mm
HXL040-P003-3 Thread pipe (1pcs) for HXL-040 thread interface Both ends with threads D63mm/d=32mm l=124mm
MC 01023 Cortec VpCI-649 Inhibitor 1 liter
Vacon Liquid Cooled OPTIONS Water chillers 400-500 VAC
ORDER TYPE CODE SUITABILITY DESCRIPTION NOTE
kW bar l/min
P@35C P@45C p q
UC-0030SP 3,8 3,3 3 20 Water chiller IP44
UC-0080SP 13,7 11,2 3,5 40 Water chiller IP54
UC-0140SP 22,1 18,3 3,5 80 Water chiller IP54
UC-0240SP 41,8 34,2 3 120 Water chiller IP54
UC-0400SP 48,6 - 3,5 120 Water chiller IP54
UC-0800SP 97,2 - 3,5 240 Water chiller IP54
UC-0500SP/E - 43 3,5 120 Water chiller IP54
UC-1000SP/E - 86 3,5 240 Water chiller IP54
transfer products
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com #

Vacon Plc
Frequency Converter
VACON PLC
Vacon NXI-line 380-500 V, IP00, EMC-level T, AIR-COOLED INVERTER UNIT
ORDER TYPE CODE MOTOR CONTINUOUS CURRENT [A] SIZE/PROT. DIMENSIONS WEIGHT
at Low Overload / 40ºC at High Overload / 40ºC FR/IP W x H x D
Motor Motor Motor Motor [mm] [kg]
400VAC 500VAC 400VAC 500VAC
IL [A] Pn [kW] Pn [kW] IH [A] Pn [kW] Pn [kW]
NXI00045A2T0CSSA1A2 4,3 1,5 2,2 3,3 1,1 1,1 FR4/IP21 128x292x190 5
NXI00095A2T0CSSA1A2 9 4 5,5 7,6 3 4 FR4/IP21 128x292x190 5
NXI00125A2T0CSSA1A2 12 5,5 7,5 9 4 5,5 FR4/IP21 128x292x190 5
NXI00165A2T0CSSA1A2 16 7,5 11 12 5,5 7,5 FR6/IP21 195x519x237 16
NXI00225A2T0CSSA1A2 23 11 15 16 7,5 11 FR6/IP21 195x519x237 16
NXI00315A2T0CSSA1A2 31 15 18,5 23 11 15 FR6/IP21 195x519x237 16
NXI00385A2T0CSSA1A2 38 18,5 22 31 15 18,5 FR6/IP21 195x519x237 16
NXI00455A2T0CSSA1A2 46 22 30 38 18,5 22 FR6/IP21 195x519x237 16
NXI00615A2T0CSSA1A2 61 30 37 46 22 30 FR7/IP21 237x591x257 29
NXI00725A2T0CSSA1A2 72 37 45 61 30 37 FR7/IP21 237x591x257 29
NXI00875A2T0CSSA1A2 87 45 55 72 37 45 FR7/IP21 237x591x257 29
NXI01055A2T0CSSA1A2 105 55 75 87 45 55 FR7/IP21 237x591x257 29
NXI01405A0T0CSSA1A2 140 75 90 105 55 75 FR8/IP00 289x758x344 48
NXI01685A0T0ISFA1A2 168 90 110 140 75 90 FI9/IP00 239x1030x372 67
NXI02055A0T0ISFA1A2 205 110 132 170 90 110 FI9/IP00 239x1030x372 67
NXI02615A0T0ISFA1A2 261 132 160 205 110 132 FI9/IP00 239x1030x372 67
NXI03005A0T0ISFA1A2 300 160 200 245 132 160 FI9/IP00 239x1030x372 67
NXI03855A0T0ISFA1A2 385 200 250 300 160 200 FI10/IP00 239x1032x552 100
NXI04605A0T0ISFA1A2 460 250 315 385 200 250 FI10/IP00 239x1032x552 100
NXI05205A0T0ISFA1A2 520 250 355 460 250 315 FI10/IP00 239x1032x552 100
NXI05905A0T0ISFA1A2 590 315 400 520 250 355 FI12/IP00 (2x239)x1032x552 200
NXI06505A0T0ISFA1A2 650 355 450 590 315 400 FI12/IP00 (2x239)x1032x552 200
NXI07305A0T0ISFA1A2 730 400 500 650 355 450 FI12/IP00 (2x239)x1032x552 200
NXI08205A0T0ISFA1A2 820 450 560 730 400 500 FI12/IP00 (2x239)x1032x552 200
NXI09205A0T0ISFA1A2 920 500 630 820 450 560 FI12/IP00 (2x239)x1032x552 200
NXI10305A0T0ISFA1A2 1030 560 710 920 500 630 FI12/IP00 (2x239)x1032x552 200
NXI11505A0T0ISFA1A2 1150 710 900 1150 560 800 FI13/IP00 708x1032x553 306
NXI13005A0T0ISFA1A2 1300 710 900 1150 630 800 FI13/IP00 708x1032x553 306
NXI14505A0T0ISFA1A2 1450 800 1000 1300 710 900 FI13/IP00 708x1032x553 306
NXI17705A0T0ISFA1A2 1770 1000 1200 1600 900 1200 FI14/IP00 (2x708)x1032x553 612
NXI21505A0T0ISFA1A2 2150 1200 1500 1940 1100 1400 FI14/IP00 (2x708)x1032x553 612
NXI27005A0T0ISFA1A2 2700 1500 1800 2300 1500 1800 FI14/IP00 (2x708)x1032x553 612
I(H) = nominal current for 150% overload requirement
(at max. 50°C ambient temperature: FI9 and bigger: at max. 40°C ambient temperature).
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature).
I(overload) = maximum 1 min/10 min overload current (high overload).
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax.: +358 (0)201 212 205 http://www.vacon.com 113

Vacon Plc
Frequency Converter
VACON PLC
Vacon NXI-line 525-690 V, IP00, EMC-level T, AIR-COOLED INVERTER UNIT
ORDER TYPE CODE MOTOR CONTINUOUS CURRENT [A] SIZE/PROT. DIMENSIONS WEIGHT
at Low Overload / 40ºC at High Overload / 40ºC FR/IP W x H x D
Motor 690VAC Motor 690VAC [mm] [kg]
IL [A] Pn [kW] IH [A] Pn [kW]
NXI00046A2T0CSSA1A2 4,5 3 3,2 2,2 FR6/IP00 195x519x237 16
NXI00056A2T0CSSA1A2 5,5 4 4,5 3 FR6/IP00 195x519x237 16
NXI00076A2T0CSSA1A2 7,5 5,5 5,5 4 FR6/IP00 195x519x237 16
NXI00106A2T0CSSA1A2 10 7,5 7,5 5,5 FR6/IP00 195x519x237 16
NXI00136A2T0CSSA1A2 13,5 11 10 7,5 FR6/IP00 195x519x237 16
NXI00186A2T0CSSA1A2 18 15 13,5 11 FR6/IP00 195x519x237 16
NXI00226A2T0CSSA1A2 22 18,5 18 15 FR6/IP00 195x519x237 16
NXI00276A2T0CSSA1A2 27 22 22 18,5 FR6/IP00 195x519x237 16
NXI00346A2T0CSSA1A2 34 30 27 22 FR6/IP00 195x519x237 16
NXI00416A0T0CSSA1A2 41 37 34 30 FR7/IP00 237x591x257 29
NXI00526A0T0CSSA1A2 52 45 41 37 FR7/IP00 237x591x257 29
NXI00626A0T0ISFA1A2 62 55 52 45 FR8/IP00 289x758x344 48
NXI00806A0T0ISFA1A2 80 75 62 55 FR8/IP00 289x758x344 48
NXI01006A0T0ISFA1A2 100 90 80 75 FR8/IP00 289x758x344 48
NXI01256A0T0ISFA1A2 125 110 100 90 FI9/IP00 239x1030x372 67
NXI01446A0T0ISFA1A2 144 132 125 110 FI9/IP00 239x1030x372 67
NXI01706A0T0ISFA1A2 170 160 144 132 FI9/IP00 239x1030x372 67
NXI02086A0T0ISFA1A2 208 200 170 160 FI9/IP00 239x1030x372 67
NXI02616A0T0ISFA1A2 261 250 208 200 FI10/IP00 239x1032x552 100
NXI03256A0T0ISFA1A2 325 315 261 250 FI10/IP00 239x1032x552 100
NXI03856A0T0ISFA1A2 385 355 325 315 FI10/IP00 239x1032x552 100
NXI04166A0T0ISFA1A2 416 400 325 315 FI10/IP00 239x1032x552 100
NXI04606A0T0ISFA1A2 460 450 385 355 FI12/IP00 (2x239)x1032x552 200
NXI05026A0T0ISFA1A2 502 500 460 450 FI12/IP00 (2x239)x1032x552 200
NXI05906A0T0ISFA1A2 590 560 502 500 FI12/IP00 (2x239)x1032x552 200
NXI06506A0T0ISFA1A2 650 630 590 560 FI12/IP00 (2x239)x1032x552 200
NXI07506A0T0ISFA1A2 750 710 650 630 FI12/IP00 (2x239)x1032x552 200
NXI08206A0T0ISFA1A2 820 800 650 630 FI12/IP00 (2x239)x1032x552 200
NXI09206A0T0ISFA1A2 920 900 820 800 FI13/IP00 708x1032x553 306
NXI10306A0T0ISFA1A2 1030 1000 920 900 FI13/IP00 708x1032x553 306
NXI11806A0T0ISFA1A2 1180 1150 1030 1000 FI13/IP00 708x1032x553 306
NXI15006A0T0ISFA1A2 1500 1500 1300 1300 FI14/IIP00 (2x708)x1032x553 612
NXI19006A0T0ISFA1A2 1900 1800 1500 1500 FI14/IIP00 (2x708)x1032x553 612
NXI22506A0T0ISFA1A2 2250 2000 1900 1800 FI14/IIP00 (2x708)x1032x553 612
I(H) = nominal current for 150% overload requirement
(at max. 50°C ambient temperature: FI9 and bigger: at max. 40°C ambient temperature).
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature).
I(overload) = maximum 1 min/10 min overload current (high overload).
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax.: +358 (0)201 212 205 http://www.vacon.com 114

Vacon Plc
Frequency Converter
VACON PLC
Vacon NXA-line 380-500 V, IP00, EMC-level T, AIR-COOLED ACTIVE FRONT-END (AFE)
ORDER TYPE CODE MAINS CONTINUOUS CURRENT [A] SIZE/PROT. DIMENSIONS WEIGHT
at Low Overload / 40ºC at High Overload / 40ºC FR/IP W x H x D
Motor Motor Motor Motor [mm] [kg]
400VAC 500VAC 400VAC 500VAC
IL [A] Pn [kW] Pn [kW] IH [A] Pn [kW] Pn [kW]
NXA02615A0T02SFA1A2 261 132 160 205 110 132 FI9/IP00 239x1030x372 67
NXA04605A0T02SFA1A2 460 250 315 385 200 250 FI10/IP00 239x1032x552 100
NXA13005A0T02SFA1A2 1300 710 900 1150 630 800 FI13/IP00 708x1032x553 306
Vacon NXA-line 525-690 V, IP00, EMC-level T, AIR-COOLED ACTIVE FRONT-END (AFE)
ORDER TYPE CODE MAINS CONTINUOUS CURRENT [A] SIZE/PROT. DIMENSIONS WEIGHT
at Low Overload / 40ºC at High Overload / 40ºC FR/IP W x H x D
Motor 690VAC Motor 690VAC [mm] [kg]
IL [A] Pn [kW] IH [A] Pn [kW]
NXA01446A0T02SFA1A2 144 132 125 110 FI9/IP00 239x1030x372 67
NXA03256A0T02SFA1A2 325 315 261 250 FI10/IP00 239x1032x552 100
NXA09206A0T02SFA1A2 920 900 820 800 FI13/IP00 708x1032x553 306
I(H) = nominal current for 150% overload requirement
(at max. 50°C ambient temperature: FI9 and bigger: at max. 40°C ambient temperature).
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature).
I(overload) = maximum 1 min/10 min overload current (high overload).
Vacon OPTIONS LCL filter for AIR-COOLED ACTIVE FRONT-END (AFE)
ORDER TYPE CODE
380-500V
Vacon LCL02615A0L011T
Vacon LCL04605A0L011T
Vacon LCL13005A0L011T
525-690V
Vacon LCL01706A0L011T
Vacon LCL03256A0L011T
Vacon LCL10306A0L011T
Vacon Charging Circuit components for NXA and NXF
Charging circuit for FI9
including items: Q'ty Description Product Code
1 Diode Bridge SKD 82
2 Charging resistors CAV150C47R
1 Contactor LC1D32P7
Charging circuit for FI10
including items: Q'ty Description Product Code
1 Diode Bridge SKD 82
2 Charging resistors CAV335C20R
1 Contactor LC1D32P7
Charging circuit for FI13
including items: Q'ty Description Product Code
1 Diode Bridge SKD 82
2 Charging resistors CAV335C11R
1 Contactor LC1D32P7
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax.: +358 (0)201 212 205 http://www.vacon.com 115

Vacon Plc
Frequency Converter
VACON PLC
Vacon NXF-line 380-500 V, IP00, EMC-level T, AIR-COOLED FFE UNIT
ORDER TYPE CODE MAINS CONTINUOUS CURRENT [A] SIZE/PROT. DIMENSIONS WEIGHT
at Low Overload / 40ºC at High Overload / 40ºC FR/IP W x H x D
Motor Motor Motor Motor [mm] [kg]
400VAC 500VAC 400VAC 500VAC
IL [A] Pn [kW] Pn [kW] IH [A] Pn [kW] Pn [kW]
NXF03005A0T0ISFA1A2 300 160 200 245 132 160 FI9/IP00 239x1030x372 67
NXF05205A0T0ISFA1A2 520 250 355 460 250 315 FI10/IP00 239x1032x552 100
NXF10305A0T0ISFA1A2 1030 560 710 920 500 630 FI12/IP00 (2x239)x1032x552 200
NXF14505A0T0ISFA1A2 1450 800 1000 1300 710 900 FI13/IP00 708x1032x553 306
NXF27005A0T0ISFA1A2 2700 1500 1800 2300 1500 1800 FI14/IP00 (2x708)x1032x553 612
Vacon NXF-line 625-690 V, IP00, EMC-level T, AIR-COOLED FFE UNIT
Note! FI12 and FI14 requires 12-pulse supply
ORDER TYPE CODE MAINS CONTINUOUS CURRENT [A] SIZE/PROT. DIMENSIONS WEIGHT
at Low Overload / 40ºC at High Overload / 40ºC FR/IP W x H x D
Motor 690VAC Motor 690VAC [mm] [kg]
IL [A] Pn [kW] IH [A] Pn [kW]
NXF02086A0T0ISFA1A2 208 200 170 160 FI9/IP00 239x1030x372 67
NXF04166A0T0ISFA1A2 416 400 325 315 FI10/IP00 239x1032x552 100
NXF08206A0T0ISFA1A2 820 800 650 630 FI12/IP00 (2x239)x1032x552 200
NXF11806A0T0ISFA1A2 1180 1150 1030 1000 FI13/IP00 708x1032x553 306
NXF22506A0T0ISFA1A2 2250 2000 1900 1800 FI14/IIP00 (2x708)x1032x553 612
I(H) = nominal current for 150% overload requirement
(at max. 50°C ambient temperature: FI9 and bigger: at max. 40°C ambient temperature).
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature).
I(overload) = maximum 1 min/10 min overload current (high overload).
Note! FI12 and FI14 requires 12-pulse supply
Vacon NXN-line 625-690 V, IP00, EMC-level T, AIR-COOLED NFE UNIT
ORDER TYPE CODE MAINS CONTINUOUS CURRENT [A] SIZE/PROT. DIMENSIONS WEIGHT
at Low Overload / 40ºC at High Overload / 40ºC FR/IP W x H x D
Motor Motor Motor Motor [mm] [kg]
400VAC 500VAC 400VAC 500VAC
IL [A] Pn [kW] Pn [kW] IH [A] Pn [kW] Pn [kW]
NXN06505B0T0NSS0000 650 355 450 590 315 400 FI12/IP00 (2x239)x1032x552 200
ORDER TYPE CODE MAINS CONTINUOUS CURRENT [A] SIZE/PROT. DIMENSIONS WEIGHT
at Low Overload / 40ºC at High Overload / 40ºC FR/IP W x H x D
Motor 690VAC Motor 690VAC [mm] [kg]
IL [A] Pn [kW] IH [A] Pn [kW]
NXN06506B0T0NSS0000 650 630 590 560 FI12/IP00 (2x239)x1032x552 200
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax.: +358 (0)201 212 205 http://www.vacon.com 116

Vacon Plc
Frequency Converter
VACON PLC
Vacon NXB-line 380-500 V, IP00, EMC-level T, AIR-COOLED BRAKE CHOPPER UNIT
ORDER TYPE CODE CONTINUOUS BRAKING CURRENT [A] SIZE/PROT. DIMENSIONS WEIGHT
at Low Overload / 40ºC at High Overload / 40ºC FR/IP W x H x D
Motor Motor Motor Motor [mm] [kg]
400VAC 500VAC 400VAC 500VAC
IL [A] Pn [kW] Pn [kW] IH [A] Pn [kW] Pn [kW]
NXB00045A2T0CSSA1A2 4,3 1,5 2,2 3,3 1,1 1,1 FR4/IP21 128x292x190 5
NXB00095A2T0CSSA1A2 9 4 5,5 7,6 3 4 FR4/IP21 128x292x190 5
NXB00125A2T0CSSA1A2 12 5,5 7,5 9 4 5,5 FR4/IP21 128x292x190 5
NXB00165A2T0CSSA1A2 16 7,5 11 12 5,5 7,5 FR6/IP21 195x519x237 16
NXB00225A2T0CSSA1A2 23 11 15 16 7,5 11 FR6/IP21 195x519x237 16
NXB00315A2T0CSSA1A2 31 15 18,5 23 11 15 FR6/IP21 195x519x237 16
NXB00385A2T0CSSA1A2 38 18,5 22 31 15 18,5 FR6/IP21 195x519x237 16
NXB00455A2T0CSSA1A2 46 22 30 38 18,5 22 FR6/IP21 195x519x237 16
NXB00615A2T0CSSA1A2 61 30 37 46 22 30 FR7/IP21 237x591x257 29
NXB00725A2T0CSSA1A2 72 37 45 61 30 37 FR7/IP21 237x591x257 29
NXB00875A2T0CSSA1A2 87 45 55 72 37 45 FR7/IP21 237x591x257 29
NXB01055A2T0CSSA1A2 105 55 75 87 45 55 FR7/IP21 237x591x257 29
NXB01405A0T0CSSA1A2 140 75 90 105 55 75 FR8/IP00 289x758x344 48
NXB01685A0T0ISFA1A2 168 90 110 140 75 90 FI9/IP00 239x1030x372 67
NXB02055A0T0ISFA1A2 205 110 132 170 90 110 FI9/IP00 239x1030x372 67
NXB02615A0T0ISFA1A2 261 132 160 205 110 132 FI9/IP00 239x1030x372 67
NXB03005A0T0ISFA1A2 300 160 200 245 132 160 FI9/IP00 239x1030x372 67
NXB03855A0T0ISFA1A2 385 200 250 300 160 200 FI10/IP00 239x1032x552 100
NXB04605A0T0ISFA1A2 460 250 315 385 200 250 FI10/IP00 239x1032x552 100
NXB05205A0T0ISFA1A2 520 250 355 460 250 315 FI10/IP00 239x1032x552 100
NXB11505A0T0ISFA1A2 1150 710 900 1150 560 800 FI13/IP00 708x1032x553 306
NXB13005A0T0ISFA1A2 1300 710 900 1150 630 800 FI13/IP00 708x1032x553 306
NXB14505A0T0ISFA1A2 1450 800 1000 1300 710 900 FI13/IP00 708x1032x553 306
I(H) = nominal current for 150% overload requirement
(at max. 50°C ambient temperature: FI9 and bigger: at max. 40°C ambient temperature).
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature).
I(overload) = maximum 1 min/10 min overload current (high overload).
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax.: +358 (0)201 212 205 http://www.vacon.com 117

Vacon Plc
Frequency Converter
VACON PLC
Vacon NXB-line 525-690 V, IP00, EMC-level T, AIR-COOLED BRAKE CHOPPER UNIT
ORDER TYPE CODE CONTINUOUS BRAKING CURRENT [A] SIZE/PROT. DIMENSIONS WEIGHT
at Low Overload / 40ºC at High Overload / 40ºC FR/IP W x H x D
Motor 690VAC Motor 690VAC [mm] [kg]
IL [A] Pn [kW] IH [A] Pn [kW]
NXB00046A2T0CSSA1A2 4,5 3 3,2 2,2 FR6/IP00 195x519x237 16
NXB00056A2T0CSSA1A2 5,5 4 4,5 3 FR6/IP00 195x519x237 16
NXB00076A2T0CSSA1A2 7,5 5,5 5,5 4 FR6/IP00 195x519x237 16
NXB00106A2T0CSSA1A2 10 7,5 7,5 5,5 FR6/IP00 195x519x237 16
NXB00136A2T0CSSA1A2 13,5 11 10 7,5 FR6/IP00 195x519x237 16
NXB00186A2T0CSSA1A2 18 15 13,5 11 FR6/IP00 195x519x237 16
NXB00226A2T0CSSA1A2 22 18,5 18 15 FR6/IP00 195x519x237 16
NXB00276A2T0CSSA1A2 27 22 22 18,5 FR6/IP00 195x519x237 16
NXB00346A2T0CSSA1A2 34 30 27 22 FR6/IP00 195x519x237 16
NXB00416A0T0CSSA1A2 41 37 34 30 FR7/IP00 237x591x257 29
NXB00526A0T0CSSA1A2 52 45 41 37 FR7/IP00 237x591x257 29
NXB00626A0T0ISFA1A2 62 55 52 45 FR8/IP00 289x758x344 48
NXB00806A0T0ISFA1A2 80 75 62 55 FR8/IP00 289x758x344 48
NXB01006A0T0ISFA1A2 100 90 80 75 FR8/IP00 289x758x344 48
NXB01256A0T0ISFA1A2 125 110 100 90 FI9/IP00 239x1030x372 67
NXB01446A0T0ISFA1A2 144 132 125 110 FI9/IP00 239x1030x372 67
NXB01706A0T0ISFA1A2 170 160 144 132 FI9/IP00 239x1030x372 67
NXB02086A0T0ISFA1A2 208 200 170 160 FI9/IP00 239x1030x372 67
NXB02616A0T0ISFA1A2 261 250 208 200 FI10/IP00 239x1032x552 100
NXB03256A0T0ISFA1A2 325 315 261 250 FI10/IP00 239x1032x552 100
NXB03856A0T0ISFA1A2 385 355 325 315 FI10/IP00 239x1032x552 100
NXB04166A0T0ISFA1A2 416 400 325 315 FI10/IP00 239x1032x552 100
NXB09206A0T0ISFA1A2 920 900 820 800 FI13/IP00 708x1032x553 306
NXB10306A0T0ISFA1A2 1030 1000 920 900 FI13/IP00 708x1032x553 306
NXB11806A0T0ISFA1A2 1180 1150 1030 1000 FI13/IP00 708x1032x553 306
I(H) = nominal current for 150% overload requirement
(at max. 50°C ambient temperature: FI9 and bigger: at max. 40°C ambient temperature).
I(L) = nominal current for 110% overload requirement (at max. 40°C ambient temperature).
I(overload) = maximum 1 min/10 min overload current (high overload).
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax.: +358 (0)201 212 205 http://www.vacon.com 118

Type Designation Code for Vacon NXL MF2-MF3
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 119

Type Designation Code for Vacon NXL MF4 - MF6
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 120

Type Designation Code for Vacon NXS and NXP FR4-FR9
NXS 0000 5 A 2 H 1 SSS A1A2000000
Option boards; each slot is represented by two characters where:
Ax = basic I/O board, Bx = expander I/O board
Cx = fieldbus board, Dx = special board
Hardware modifications
SSS = 6-pulse connection; air-cooled; standard board
SSV = 6-pulse connection; air-cooled; varnished board
BSS = Additional DC-connection; air-cooled; standard board (>FR7)
BSV = Additional DC-connection; air-cooled; varnished board (>FR7)
SSF = 6-pulse connection; air-cooled; standard board (FR9)
SSG = 6-pulse connection; air-cooled; varnished board (FR9)
BSF = Additional DC-connection; air-cooled; standard board (FR9)
BSG = Additional DC-connection; air-cooled; varnished board (FR9)
Brake chopper
0 = No brake chopper
1 = Internal brake chopper
2 = Internal brake chopper and resistor (FR4-FR6)
EMC emission level
H = Fulfils standard EN61800-3+A11, 1st environment restricted
distribution, 2nd environment
L = Fulfils standard EN61800-3+A11, 2nd environment, restr. distr.
T = Fulfils standard EN61800-3 for IT Networks
N = No EMC emission protection
C= Fullfills standard EN61800-3+A11, 1st environment unrestricted
distribution (exeption: Radiated emission of the IP21 units
meet only the requirements of restricted distribution), 2nd environment
Enclosure class
0 = IP00 (FR9 only)
2 = IP21 (Nema 1)
5 = IP54 (Nema 12)
Control keypad
A = Standard (alpha-numeric)
B = No local keypad
F = Dummy keypad
G = Graphic display
Nominal mains voltage
2 = 208-240 V, 5 = 380-500 V, 6 = 525-690 V (3 phase)
Nominal current (low overload)
0003 = 3 A etc.
Product range: NXS = Standard, NXP = High-performance
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 121

Type Designation Code for Vacon NXP and NXC FR9-FR14
NXP 0000 5 A 3 L 0 SSF A1A2000000
Option boards; each slot is represented by two characters where:
Ax = basic I/O board, Bx = expander I/O board
Cx = fieldbus board, Dx = special board
NXC variations:
SSF = Standard
SSG = Varnished boards
TSF = 12-pulse, standard
TSG = 12-pulse, Varnished PCB's
NXP variations:
SSA = Integrated control part, Standard
SSB = Integrated control part, Varnished PCB's
TSA = 12-pulse, integrated control part, Standard
TSA = 12-pulse, integrated control part, Varnished PCB's
Brake chopper
0 = No brake chopper
1 = Integrated brake chopper
EMC emission level
L = Fulfils standard EN61800-3+A11, 2nd environment, restr. distr.
T = Fulfils standard EN61800-3 for IT Networks
N = No EMC emission protection
Enclosure class
0 = IP00 (module only)
2 = IP21 (Nema 1)
5 = IP54 (Nema 12)
Control keypad
A = Standard (alpha-numeric), in Vacon NXC on the cabinet door
B = No local keypad
F = Dummy keypad, in Vacon NXC on the cabinet door
G = Graphic display, in Vacon NXC on the cabinet door
Nominal mains voltage
5 = 380-500 V, 6 = 525-690 V (3 phase)
Nominal current (low overload)
e.g. 0520 = 520 A
Product range:
NXP = Standalone/IP00 module
NXC = Cabinet
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358-201-2121-205 www.vacon.com 122

Type designation code for liquid cooled AC drives and inverters
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 123

Vacon Plc
AC drive
Type designation code for Vacon Heat Exchangers
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 124

Vacon C'n DC bus products - Type Code key
NX I AAAA V A 2 T 0 C S S A1 A2 00 00 00
Option boards; each slot is represented by two characters where:
A = basic I/O board
B = expander I/O board
C = fieldbus board
D = special board
Hardware modifications; module type - S - Boards
S = Direct connection, standard boards, FR4...8
V = Direct connection, varnished boards, FR4...8
F = Fiber connection, standard boards
G = Fiber connection, varnished boards
S = Standard air cooled drive
A = Standard air cooled power unit - transformer supply for main fan
U = Standard air cooled power unit - external supply for main fan
C = INU - with integrated charging circuit
I = INU - no charging circuit
2 = AFE module
5 = AFE module + LCL filter
3 = FFE module
6 = FFE module + AC choke
4 = NFE module
7 = NFE module + AC choke
8 = BCU Brake chopper unit
0 = N/A (no brake chopper)
EMC emission level;
T = IT networks (EN61800-3)
Enclosure class
2 = IP21, FR4...7
0 = IP00, FR8, FI9...14
Control keypad
A = standard (alpha numeric)
B = no local control keypad
F = dummy keypad
G = graphic display
Nominal supply voltage
5 = 380...500VAC / 465...800VDC
6 = 525...690VAC / 640...1100VDC
Nominal current (low overload)
0004 = 4A, 0520 = 520A, etc.
Module type
A = AFE Active Front End
B = BCU Brake Chopper Unit
F = FFE Fundamental Front End
I = INU Inverter
N = Non regenerative Front End
Product generation
Input Device Options (I group)
+ILS Load Switch
+IFD Switch fuse and fuses
+ICB Circuit Breaker (MCCB)
+ICO Input Contactor
+IFU Input fuses
Charging Options (C group)
+CPF Charging package for Ftont End (contactor, 2pcs resistors and diode bridge)
+CPI Charging package for Inverter (fuse switch, fuses, 2pcs resistors)
Output Filter Options (O group)
+OCM Common mode filters
+ODU dU/dt filter
+OSI Sinusoidal filter
Fuse Options (F group)
+FDA DC fuses for Front End
+FDI DC fuses for INU
SUBJECT TO CHANGE WITHOUT NOTICE
125

Vacon LCL filters - Type code
Type code
Product range
Current
Voltage
Versio
IP class
HF capacitors
Capacitor
balancing
Reserve
Manufacturer
Standard
Module
Vacon LCL AAAA V A 0 L 0 1 0 T
Types available Vacon LCL 0460 5 A 0 L 0 1 1 T
Vacon LCL 1300 5 A 0 L 0 1 1 T
Vacon LCL 0325 6 A 0 L 0 1 1 T
Vacon LCL 1030 6 A 0 L 0 1 1 T
Manufacturer
T = Trafotek
LCL cooling fan
0 = AC fan
1 = DC fan
Balancing resistors
1 = on HF capacitors
0 = No resistors (IT networks)
Main Capacitor variant
0 = As specified
No variation at the moment
HF capacitors
L = Mounted (á 25 uF)
0 = No capacitors
IP Class
0 = IP00
Version (Hardware)
A = Released 24.04.2006
(460/325)
Voltage
5 = 380...500VAC
6 = 525...690 VAC
Current
0460 = 460A
0385 = 385A, etc
Product range
LCL = LCL filter for AFE
SUBJECT TO CHANGE WITHOUT NOTICE
Vacon Plc Runsorintie 7 65380 VAASA FINLAND tel.:+358-201-2121 fax: +358 (0)201 212 205 http://www.vacon.com 126