AT Commands Reference Manual

AT Commands Reference Manual
+ETBM - Call Termination Buffer Management
This extended-format compound parameter controls the handling of data remaining in
modem buffers upon call termination. It accepts three numeric subparameters:
Syntax
+ETBM=[[,[,]]]
Defined Values
Decimal number 0 specifying that disconnect will occur
immediately and all buffered transmit data will be discarded
when the local DTE requests call disconnection.
Decimal number 0 specifying that disconnect will occur
immediately and all buffered receive data will be discarded
when the local DTE requests call disconnection.
Decimal number 0 specifying that the modem will not attempt
to deliver the buffered data before abandoning the attempt and
discarding remaining data.
Reporting Current or Selected Values
Command: +ETBM?
Response: +ETBM: ,,
Example: +ETBM: 0,0,0
Reporting Supported Range of Parameter Values
Command: +ETBM=?
Response: +ETBM: ( range),( range),
( range)
Example: +ETBM: (0),(0),(0)
100722B Conexant 3-63