AT Commands Reference Manual

AT Commands Reference Manual
+VIT - Voice Inactivity Timer (DTE/Modem)
This command sets the modem’s initial value for the DTE/modem inactivity timer.
Syntax
+VIT=
Defined Values
Decimal number corresponding to the time in units of 1.0
second. A value of 0 disables the timer.
Reporting Current or Selected Values
Command: +VIT?
Response:
Example: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +VIT=?
Response: range
Example: 0-255
Result Codes
OK = 0-255.
ERROR
Otherwise, or if not in Voice Mode.
6-10
Conexant
100722B