GSE350-355 IS Indicator User Manual - Avery Weigh-Tronix

More documents

Recommendations

Info

Key Press Weigh Mode Count Mode Performs a gross zero function and/or clears an entry in progress. Performs a quantity zero function and/or clears an entry in progress. Performs a print function and/or 'scrolls' through digits during setpoint entry. Performs a print function and/or 'scrolls' through digits during setpoint entry. Toggles between 'lb' and 'kg' and/or advances cursor to next entry position. Toggles through standard sample sizes and/or begins a new sample entry. Performs an auto-tare function (if enabled) and/or accepts an entry in progress. If a tare weight is known, key in the value and press [TARE]. Toggles between display modes and/or restores power to the indicator (if autoshutoff enabled). Performs a sample. If a number is keyed in before hand, it will be used as the sample size. Accepts an entry. Performs an auto-tare function and requests a piece sample and/or accepts an entry in progress. Toggles between display modes and/or restores power to the indicator (if autoshutoff enabled). Performs a sample. If a number is keyed in before hand, it will be used as the sample size. CLR NO Clears an entry in progress. Hold this key on power-up to turn on the display if in sleep mode. Performs a quantity zero function and/or clears an entry in progress. If setpoints are enabled, causes a process to start or resume. If setpoints are enabled, causes a process to start or resume. If setpoints are enabled, causes a pause. Press [STOP] again to abort the process. If setpoints are enabled, causes a pause. Press [STOP] again to abort the process. Wake up the indicator if in sleep mode. Turn on the indicator if power is off. Access the target entry mode. Turn off indicator by holding key for approximately 1 second. Wake up the indicator if in sleep mode. Turn on the indicator if power is off. Access the target entry mode. Turn off indicator by holding key for approximately 1 second. 18 Model 350 I.S. and Model 355 I.S. Service Manual
3.2.3 Weigh Mode Functions The Model 350 I.S. and Model 355 I.S. keypads have five primary Weigh Mode functions: Performs a gross zero and selects the gross mode. Initiates data transmission out the selected communication port. Toggles the units of measure between lb, kg, g, lb oz, oz. Tares any displayed weight and selects the net mode. Toggles the display between GROSS, NET, QUANTITY and setpoint TARGETS (if enabled). Model 350 I.S. and Model 355 I.S. Service Manual 19
Page 1 and 2: Model 350I.S. and Model 355I.S. Ins
Page 3 and 4: Table of Contents Chapter 1 General
Page 5 and 6: 1 General information and warnings
Page 7 and 8: 1.3.3 Safe Handling of Equipment wi
Page 9 and 10: 1.8 FCC and EMC Declarations of Com
Page 11 and 12: 2 Installation The Model 350/355 I.
Page 13 and 14: 2.3.1 Model 350 I.S. Figure 2.1 Mod
Page 15 and 16: 2.4 AC and DC Powered 2.4.1 DC Oper
Page 17 and 18: 3 Display and Keypad 3.1 Display Th
Page 19: Key Press Weigh Mode Count Mode Bac
Page 23 and 24: 4 Operation The Model 350 I.S. and
Page 25 and 26: To enter the date from the Enter~da
Page 27 and 28: 4.6 Percentage Checkweigh This feat
Page 29 and 30: Example: Target of 20 2a. Press [PR
Page 31 and 32: m DISPLAY READS > 2 . 2c. Press [PR
Page 33 and 34: 4.9.1 Enter a Target Pressing [TARE
Page 35 and 36: 4.9.4 Discharge Example With a syst
Page 37 and 38: Annunciators Status Annunciator Sta
Page 39 and 40: 4.11.2 Start Checkweighing The chec
Page 41 and 42: 4.12.3 Target Deviation Checkweighi
Page 43 and 44: 5 Troubleshooting The Model 350/355
Page 45 and 46: 6 Specifications Performance Full S
Page 48: Avery Weigh-Tronix USA 1000 Armstro

GSE350-355 IS Indicator User Manual - Avery Weigh-Tronix

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?