GSE350-355 IS Indicator User Manual - Avery Weigh-Tronix

Key Press Weigh Mode Count Mode
Performs a gross zero function and/or
clears an entry in progress.
Performs a quantity zero function and/or
clears an entry in progress.
Performs a print function and/or 'scrolls'
through digits during setpoint entry.
Performs a print function and/or 'scrolls'
through digits during setpoint entry.
Toggles between 'lb' and 'kg' and/or
advances cursor to next entry position.
Toggles through standard sample sizes
and/or begins a new sample entry.
Performs an auto-tare function (if
enabled) and/or accepts an entry in
progress. If a tare weight is known, key
in the value and press [TARE].
Toggles between display modes and/or
restores power to the indicator (if autoshutoff
enabled).
Performs a sample. If a number is
keyed in before hand, it will be used as
the sample size. Accepts an entry.
Performs an auto-tare function and
requests a piece sample and/or accepts
an entry in progress.
Toggles between display modes and/or
restores power to the indicator (if autoshutoff
enabled).
Performs a sample. If a number is keyed
in before hand, it will be used as the
sample size.
CLR
NO
Clears an entry in progress. Hold this
key on power-up to turn on the display if
in sleep mode.
Performs a quantity zero function and/or
clears an entry in progress.
If setpoints are enabled, causes a
process to start or resume.
If setpoints are enabled, causes a
process to start or resume.
If setpoints are enabled, causes a
pause. Press [STOP] again to abort the
process.
If setpoints are enabled, causes a pause.
Press [STOP] again to abort the process.
Wake up the indicator if in sleep mode.
Turn on the indicator if power is off.
Access the target entry mode.
Turn off indicator by holding key for
approximately 1 second.
Wake up the indicator if in sleep mode.
Turn on the indicator if power is off.
Access the target entry mode.
Turn off indicator by holding key for
approximately 1 second.
18
Model 350 I.S. and Model 355 I.S. Service Manual