GSE350-355 IS Indicator User Manual - Avery Weigh-Tronix

More documents

Recommendations

Info

8 Model 350 I.S. and Model 355 I.S. User Instructions
2 Installation The Model 350/355 I.S. stainless steel enclosure meets NEMA 4X type specifications. The encapsulant used is Dow Corning "Sylgard 170" Silicone Elastomer. Do not allow the power supply or battery pack to be immersed in hazardous liquid, or to be subjected to any condensation of the hazardous atmosphere. If the power supply or battery pack is likely to be splashed with hazardous liquid, protect it with a splash guard. Never mount the power supply or battery pack in a position where it is permanently subjected to hazardous atmosphere, such as in a pit, or any closed, unventilated space. Always mount the unit in a position which minimizes its' exposure to the hazardous gas, vapor, or dust. The heating effect of the sun must be taken into account when installing hazardous area equipment, especially in hot climates. If exposed to direct sunlight, it is possible that the temperature class (T4 = 135 ºC, T3 = 200 ºC ) may be exceeded. Contact Avery Weigh-Tronix for further information with regard to hazard analysis, and compatibility of equipment with hazardous materials. WARNING: Risk of electrical shock! WARNING! Only authorised personnel who have had appropriate product training and hazardous area training relavent to the locattion in which the equipment is to be sited must install and maintain this equipment. The installation must be done in accordance with the procedures detailed in the Service Manual. Refer to your supplier for more details. Model 350 I.S. and Model 355 I.S. User Instructions 9
Page 1 and 2: Model 350I.S. and Model 355I.S. Ins
Page 3 and 4: Table of Contents Chapter 1 General
Page 5 and 6: 1 General information and warnings
Page 7 and 8: 1.3.3 Safe Handling of Equipment wi
Page 9: 1.8 FCC and EMC Declarations of Com
Page 13 and 14: 2.3.1 Model 350 I.S. Figure 2.1 Mod
Page 15 and 16: 2.4 AC and DC Powered 2.4.1 DC Oper
Page 17 and 18: 3 Display and Keypad 3.1 Display Th
Page 19 and 20: Key Press Weigh Mode Count Mode Bac
Page 21 and 22: 3.2.3 Weigh Mode Functions The Mode
Page 23 and 24: 4 Operation The Model 350 I.S. and
Page 25 and 26: To enter the date from the Enter~da
Page 27 and 28: 4.6 Percentage Checkweigh This feat
Page 29 and 30: Example: Target of 20 2a. Press [PR
Page 31 and 32: m DISPLAY READS > 2 . 2c. Press [PR
Page 33 and 34: 4.9.1 Enter a Target Pressing [TARE
Page 35 and 36: 4.9.4 Discharge Example With a syst
Page 37 and 38: Annunciators Status Annunciator Sta
Page 39 and 40: 4.11.2 Start Checkweighing The chec
Page 41 and 42: 4.12.3 Target Deviation Checkweighi
Page 43 and 44: 5 Troubleshooting The Model 350/355
Page 45 and 46: 6 Specifications Performance Full S
Page 48: Avery Weigh-Tronix USA 1000 Armstro

GSE350-355 IS Indicator User Manual - Avery Weigh-Tronix

Create successful ePaper yourself

Delete template?

Save as template?