BID Document for Guest House with Boundary Wall.pdf - Integrated ...

123 IS-1868: 1983 Code of practice for Fabrication of Aluminum Door & Window
124 IS-1661: 1972 Cement & Cement lime plaster finishes.
125 IS-6278 Code of Practice for white washing and colour washing.
126 IS-102 Ready mixed paint, brushing, red lead, non-setting, priming.
127 IS-1477 Code of Practice for painting of ferrous metals in buildings.
128 IS-2074 Ready mixed paint, red oxide zinc chrome priming.
129 IS-2339 Aluminum paint for general purposes.
130 IS-12288: 1998 Specification for use and laying of Ductile Iron Pipes.
131 IS-3114 : 1994 Laying of C.I. Pipes.
132 IS-783 : 1985 Laying of concrete pipe.
133 IS:7634 Laying and P.V.C. Pipes
134 IS-782:1978 Caulking Lead.
135 IS-3950: 1979 Surface boxes for sluice valves.
136 SP – 35 (S & P) Hand book on Water Supply & Sanitary works.
137 IS-2685: 1971 Specification for selection, installation and maintenance of Sluice Valves.
138 IS:1742 Code of practice for building drainage
139 IS:2065 Code of practice for water supply in buildings
140 IS 4353 Code of practice for welding
141 IS7307, & IS 7310 Code of practice for Qualification standard for welding procedures, welding
and welding operations
142 IS 5878 Code of practice for Welding defects
N.B.:For rest of the I.S.S. the Contractor should consult classified list of Indian standard, Civil
Engineering Dept (CED) of latest version.
2.0 APPROVAL OF MATERIALS
Sample of materials in sufficiently large quantity with descriptive data thereof shall be furnished by the
contractor to the Engineer-in-charge well before the collection of such materials and equipments so as to
permit inspection, testing and approval. The sample shall be properly marked to show the name of the
materials, name of manufacturer, place of origin and item for which it is to be used. After approval, the
sample shall be available for inspection at all time.
All materials including DI Pipes, C.I.D.F Pipes, Specials , Rubber Gasket , Nuts & Bolts etc. to be supplied
by the contractor shall conform to the requisite I.S. specification properly tested and duly certified. Those are
to be approved by the Engineer-in-charge before use. Third party inspection of such materials has to be
arranged by the agency and to be approved by the tender inviting authority.
3.0 MATERIALS
3.1 Stone Chips:
These should be obtainable by the contractor from Pakur, well graded conforming to the standard specifications
of P.W.D. and approved by the Engineer-in-charge.
3.2 Sand:
Sand for construction purpose shall have to be collected either from Simlagar or river bed of
Damodar/Mayurakshi/Kangsabati or Ajoy and should be coarse, cleaned, screened and washed & of quality
conforming to the standard specification of P.W.D/ this Directorate and also to be approved by the Engineerin-charge.
3.3 Brick:
70