BID Document for Guest House with Boundary Wall.pdf - Integrated ...

4.0 Laying and fixing of one number PVC insulated and PVC
sheathed / XLPE power cable of 1.1 KV grade of following
size on wall surface as required.
Upto 35 sq. mm (clamped with 1mm thick saddle)
5.0 Supplying and making cable route marker with cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size ) of size 60 cm X 60 cm at
the bottom and 50 cm X 50 cm at the top with a thickness of
10cm including inscription duly engraved as required.
Each 30
6.0 Supplying and making indoor end termination with brass
compression gland and aluminium lugs for following size of
PVC insulated and PVC sheathed / XLPE aluminium
conductor cable of 1.1 KV grade as required.
6.1 2 X 6 sq. mm (19mm) Each 6
6.2 2 X 10 sq. mm (19mm) Each 10
6.3 2 X 22 sq. mm (19mm) Each 4
6.4 2 X 25 sq. mm (22mm) Each 4
6.5 3½ X 25 sq. mm (28mm) Each 1
6.6 4 X 10 sq. mm (25mm) Each 1
7.0 Supplying and making outdoor end termination with cast
resin compound including aluminium lugs and other
jointing materials for following size of PVC insulated and
PVC sheathed / XLPE aluminium conductor cable of 1.1
KV grade as required.
7.1 2 X 16 sq. mm Each 80
7.2 2 X 25 sq. mm Each 1
7.3 3½ X 25 sq. mm Each 1
8.0 Providing, laying and fixing following dia G.I. pipe
(medium class) in ground complete with G.I. fittings
including trenching (75 cm deep) and re-filling etc as
required.
100 mm dia Metre 20
9.0 Providing, laying and fixing following dia RCC pipe NP2
class (light duty) in ground complete with RCC collars,
jointing with cement mortar 1:2 (1 cement : 2 fine sand)
including trenching (75 cm deep) and refilling etc as
required.
150 mm dia Metre 20
10.0 Providing and fixing following capacity TP&N
disconnector fuse switch unit inside the existing panel board
with ISI marked HRC fuses including drilling holes in
cubicle panel, making connections, etc. as required.
32 Amp TP&N Each 1
11.0 Supplying and fixing following way, single pole and
neutral, sheet steel, MCB distribution board, 240 volts, on
surface/ recess, complete with tinned copper bus bar,
neutral bus bar, earth bar, din bar, interconnections, powder
painted including earthing etc. as required. (But without
MCB / RCCB / Isolator)
2 + 12 way, Double door Each 1
12.0 Supplying and fixing following way, horizontal type three
pole and neutral, sheet steel, MCB distribution board, 415
volts, on surface / recess, complete with tinned copper bus
bar, neutral bus bar, earth bar, din bar, interconnections,
powder painted including earthing etc. as required. (But
127
Metre
20