BID Document for Guest House with Boundary Wall.pdf - Integrated ...

20.0 Extra for fixing the louvers / shutters complete with frame
for a exhaust fan of all sizes.
Each 5
21.0 Providing and fixing following capacity TP&N
disconnector fuse switch unit inside the existing panel board
with ISI marked HRC fuses including drilling holes in
cubicle panel, making connections, etc. as required.
21.1 32 Amp TP&N Each 1
21.2 63 Amp TP&N Each 1
22.0 Supplying and fixing following way, single pole and
neutral, sheet steel, MCB distribution board, 240 volts, on
surface/ recess, complete with tinned copper bus bar,
neutral bus bar, earth bar, din bar, interconnections, powder
painted including earthing etc. as required. (But without
MCB / RCCB / Isolator)
22.1 2 + 4 way, Double door Each 2
22.2 2 + 6 way, Double door Each 1
22.3 2 + 8 way, Double door Each 3
22.4 2 + 12 way, Double door Each 1
23.0 Supplying and fixing following way, horizontal type three
pole and neutral, sheet steel, MCB distribution board, 415
volts, on surface / recess, complete with tinned copper bus
bar, neutral bus bar, earth bar, din bar, interconnections,
powder painted including earthing etc. as required. (But
without MCB / RCCB / Isolator)
4 way (4 + 12), Double door Each 1
24.0 Supplying and fixing 5 amps to 32 amps rating, 240/415
volts, "C" curve, miniature circuit breaker suitable for
inductive load of following poles in the existing MCB DB
complete with connections, testing and commissioning etc.
as required.
24.1 Single pole Each 34
24.2 Double pole Each 5
24.3 Triple pole Each 1
24.4 Four pole Each 1
25.0 Supplying and fixing single pole blanking plate in the
existing MCB DB complete etc. as required.
26.0 Providing and fixing M.V. danger notice plate of 200 mm X
150 mm, made of mild steel, at least 2 mm thick, and
vitreous enameled white on both sides, and with inscription
in single red colour on front side as required.
27.0 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia
including accessories, and providing masonry enclosure
with cover plate having locking arrangement and watering
pipe etc. with charcoal / coke and salt as required.
Each 4
Each 1
Each 1
28.0 Supplying and laying 6 SWG G.I. wire at 0.50 metre below
ground level for conductor earth electrode, including
connection / termination with GI thimble etc. as required.
Metre 5
29.0 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre
below ground as strip earth electrode, including connection
/ terminating with G.I. nut, bolt, spring, washer etc. as
required. (Jointing shall be done by overlapping and with 2 Metre 5
106