BID Document for Guest House with Boundary Wall.pdf - Integrated ...

approved brand (size not less than 600 mm X 600 mm X10
mm thick) in floor, skirting etc. set in 20 mm sand cement
mortar (1:4) and 2 mm thick cement slurry backside of tiles
using cement @ 2.91Kg./Sq.M or using polymerised
adhesive (6mm thick layer applied directly over finished
artificial stone floor/ Mosaic etc without any backing course
) laid after application slurry using 1.75kg of cement per
sqm below mortar only, joints grouted with admixture of
white cement & colouring pigment to match with colour of
tiles/ epoxy grout materials of approved make as directed &
removal of wax coating of top surface of tiles with warm
water & polishing the tiles using soft & dry cloth upto
mirror finish complete including the cost of materials,
labour and all other incidental charges complete true to the
manufacturer's specification and direction of Engineer-in-
Charge. (white cement, synthetic adhesive and grout
material to be supplied by agency)
(I).(B) Light Colour
2 Supplying, fitting & fixing 1st quality ceramic tiles of any
size having mat finish in walls with cement sand mortar
(1:4) 20mm thk and cement slurry 2 mm thk. At back side
of tiles using cement @2.91 kg/Sqm & Joint filling using
white cement slurry @ 0.20 Kg/Sqm (Coloured decorative)
F DOOR/WINDOWS
1 Wood work in door frame fitted & fixed complete including
a protective coat of painting at the contact surface of the
frame excluding cost of conc. Iron butt hinges and MS
clamp.
a) Sal wood
2 Supplying solid flush type doors of commercial quality, the
timber frame consisting of top and bottom rails an side
styles of well seasoned timber 65 mm wide each and the
entire frame fitted with 37.5mm wide battens placed both
ways in order to make the door of solid core and internal
lipping with garjan or similar wood veneers using phenol
formaldehyde as glue etc. complete including fitting, fixing
shutters in position but excluding the cost of hinges and
other fittings.
35 mm thick shutters ( single leaf)
3 Providing and fixing double glazed hermetically sealed
glazing in aluminium windows, ventilators and partition etc.
with 6 mm thick clear float glass both side, having 12 mm
air gap, including providing EPDM gasket, perforated
aluminium spacers, desiccants, sealant (Both primary and
secondary sealant) etc. as per specifications, drawings and
direction of Engineer-in-charge complete.
Sqm 99.53
Cum 1.01
Sqm 51.71
Sqm 67.34
4 Wood work in upper rails of railing, hand rail of staircase
etc including necessary fitted and fixed complete (for
purpose of payment section will be measured in the square)
a) Sal wood Cum 0.23
5 M.S or W.I ornamental grill or approved design joints
continuously welded with M.S, W.I flats and bars for
windows, railing etc fitted and fixed with necessary screws
and lugs (i)Grill weighing above 10 Kg /sq.mtr and up to16
Kg./sq.mtr .
101