Untitled - J. ROMA, Lda.

HOBO Remote Monitoring System
Sensors and Analog Sensor Port
onset
Sensors that require optional Analog Sensor Port
Gauge Pressure
T-ASH-G2-XXX
Ranges:
Accuracy:
0-100, 0-200, 0-500 psig
±1% of span from –20° to 85°C (-4° to 185°F)
Differential Pressure
T-SET-265-XXX
Ranges:
Accuracy:
0-0.25 in, 0-1 in, 0-2.5 in, 0-5 in, 0-10 in WC
±1% FS
Carbon Dioxide/Temp
TEL-7001
Ranges:
Accuracy:
0 to 4000 ppm CO2 , 0° to 40°C (32° to 104°F)
±50ppm or ±5% of reading; ±1°C (±2°F)
Requires CABLE-2070 for use with Analog Sensor Port.
kWh Transducer
T-VER-8044-100
Ranges:
Accuracy:
3 phase, 50/60 Hz, 480 VAC, 0 to 100 Amps
±3% per ANSI C12.1 (from 10% to 100% of CT rating)
DC Current Transducer
T-VER-H970-080
The Veris Split Core DC Current Transformer (CT) provides accurate
load level monitoring of DC current loads up to 80 amps. By combining
a state of the art sensor with proven transducer circultry, the CT offers
a single product solution that features factory-calibrated, switch-select
able ranges of 0 to 20/40/80 amps for high resolution and maximum
installation flexibility.
Sensors that require True RMS Module
AC Voltage
T-MAG-SPT-XXX
Ranges: 0-150, 0-300, 0-600 volts
Accuracy: ±1% (from 10% to 130% of rated voltage)
TRMS Module
S-FS-TRMSA-D
Accessories
AC Current
T-MAG-SCT-XXX
Ranges: 0-5, 0-20, 0-50, 0-100, 0-200, 0-600 Amps
Accuracy: ±1% (from 10% to 130% of rated current)
AC Power Adapter
AC-U30
Input power requirements: 100 to 240VAC, 50 or 60 hz
Provides a continuous change of the U30 battery.
(In the event of a power failure, the battery provides DC power to U30)
1-800-LOGGERS
25