OPERATOR'S AND PARTS MANUAL - Walker Mowers

More documents

Recommendations

Info

MAINTENANCE SAFETY PRECAUTIONS - continued ALWAYS USE GENUINE <strong>PARTS</strong> WHEN REPLACEMENT <strong>PARTS</strong> ARE REQUIRED 1. Keep the tractor and rotary broom properly maintained. 2. Park the tractor/rotary broom on level ground, place the transmission in neutral, set the parking brake, disengage the PTO, lower the rotary broom to the ground, place all control levers in neutral, shut off the engine and remove the ignition key and allow the rotating parts to stop BEFORE making any rotary broom adjustments. 3. To avoid injury, do not adjust, unblock the driving system, or service the rotary broom with the tractor engine running. Make sure rotating components have completely stopped before leaving the operator’s seat. 4. Keep the tractor/rotary broom clean. Snow , dirt or ice build-up can lead to malfunction or personal injury from thawing and refreezing in garage. 5. Always wear eye protection when cleaning or servicing the rotary broom or subframe. 6. DO NOT service the tractor while the engine is running or hot, or if the unit is in motion. Always lower rotary broom to the ground. If necessary to service rotary broom in raised position, securely support with stands or suitable blocking before working underneath. Do not rely on hydraulically supported devices for your safety. They can settle suddenly, leak down, or be accidentally lowered. 7. Do not attempt to service machine, clear obstructions or unclog the rotary broom's driving system with the engine running. Always shut off engine and allow all motion to cease. 8. The manufacturer will not claim responsibility for fitment of unapproved parts and/or accessories and any damages as a result of their use. 9. Make sure all shields and guards are securely in place following all service, cleaning, or repair work. 10.Do not modify or alter this rotary broom or any of its components or operating functions. If you have questions concerning modifications, consult with your dealer. 11.Do not operate a rotary broom that is defective or has missing parts. Make sure that all recommended maintenance procedures are completed before operating the rotary broom. 12.Check all controls regularly and adjust where necessary. Make sure that the brakes are evenly adjusted. 13.Periodically check all nuts and bolts for tightness, especially wheel hub and rim nuts. 14.To avoid serious personal injury: Escaping hydraulic/diesel fluid under pressure can penetrate the skin causing serious injury. Do not use your hands to check for leaks. Use a piece of cardboard or paper to search for leaks. 15.Stop engine and relieve pressure before connecting or disconnecting hydraulic hoses. Tighten all connections before starting engine or pressurizing hoses. OM 0182BR47-A 8
DECALS Replace immediately if damaged 661051 2500584 660328 660988 2500515 658708 9
Page 1 and 2: OPERATOR'S AND PARTS MANUAL 47" (1.
Page 3 and 4: TABLE OF CONTENT INTRODUCTION - TO
Page 5 and 6: INTRODUCTION TO THE PURCHASER All p
Page 7 and 8: NOTICE SAFETY PRECAUTIONS - continu
Page 9: SAFETY PRECAUTIONS - continued 20.
Page 13 and 14: 3. Figure 5: Drill five 13/64” (5
Page 15 and 16: ASSEMBLY 7. Put the pivot lock pin
Page 17 and 18: OPERATION GENERAL PREPARATION 1. Ch
Page 19 and 20: General Sweeping OPERATION Snow Rem
Page 21 and 22: MAINTENANCE Chain Replacement (Figu
Page 23 and 24: MAINTENANCE 10. SNUG FIT : To ensur
Page 25 and 26: Lawn Dethatching Wheel Kit Use a gr
Page 27 and 28: PARTS INTRODUCTION All parts are il
Page 29 and 30: PARTS MALE QUICK HITCH SYSTEM REF.
Page 31 and 32: PARTS ROTARY BROOM ASSEMBLY - 6650-
Page 33 and 34: PARTS PIVOT BRACKET & FEMALE HITCH
Page 35 and 36: GEAR BOX - 4500024 PARTS REF. DESCR
Page 37 and 38: AVAILABLE OPTION LAWN DETHATCHING W
Page 39 and 40: TORQUE SPECIFICATION TABLE GENERAL

OPERATOR'S AND PARTS MANUAL - Walker Mowers

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?