HME system 20 drive-thru timer system operations manual.pdf
HME system 20 drive-thru timer system operations manual.pdf
HME system 20 drive-thru timer system operations manual.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Step 4: action result<br />
To make the selected display flash after<br />
the target time has passed, press key 1.<br />
If you do not want the display to flash,<br />
press the Ø key.<br />
If you pressed key 1, to complete this<br />
entry and go to the next step, press the<br />
ENTER key.<br />
If you pressed the Ø key, press the ENTER<br />
key and go to Step 6.<br />
Flash target slow?<br />
Enter 1= Yes, Ø= No:1<br />
Display 1 Setup<br />
Standby Mode (1-4):2<br />
Step 5: action result<br />
If you pressed key 1, to select slow flashing,<br />
press key 1 again, or to select fast<br />
flashing, press the Ø key. Then press<br />
ENTER.<br />
Flash at excess time?<br />
Enter 1= Yes, Ø= No:1<br />
Step 6: action result<br />
To make the selected display flash after<br />
the excess time has passed, press key 1.<br />
If you do not want the display to flash,<br />
press the Ø key.<br />
If you pressed key 1, to complete this<br />
entry and go to the next step, press the<br />
ENTER key.<br />
If you pressed the Ø key, press the ENTER<br />
key and go to Step 8.<br />
Flash excess slow?<br />
Enter 1= Yes, Ø= No:Ø<br />
Display 1 Setup<br />
Standby Mode (1-4):2<br />
Step 7: action result<br />
If you pressed key 1, to select slow<br />
flashing, press key 1 again, or to select<br />
fast flashing, press the Ø key. Then<br />
press ENTER.<br />
Display 1 Setup<br />
Standby Mode (1-4):2<br />
22