HME system 20 drive-thru timer system operations manual.pdf

Step 8: entry result
To enter the number of reporting Period
Days in the store’s standard reporting
period, press the number keys, then
press ENTER.
Delete Time Ø-3sec
Enter 1=Yes, Ø=No: Ø
NOTE: These periods must be a
minimum of 14 days and a
maximum of 365 days, and are
typically either 14, 21 or 28 days.
Example entry : 28
Step 9: entry result
To delete car entries with times of 3 seconds
or less, press key 1. Otherwise press
the Ø key.
Timer Configuration
(1--1Ø) or Ø=Done : 2
To return to the Timer Configuration
display, press the ENTER key.
This completes the System Setup. Other Timer Configuration settings can be
selected by pressing any of the number keys shown on Table 2, page 12. Press
the ESC key to return to the Enter Command display on page 11.
16